SG Broadband Community

Posted: **Tue Feb 05, 2002 8:15 pm**

just booted(or tried to) the computer up for the 1st time, i hear a couple of beeps then see nothing on the screen? i checked the wiring and they seem right, any help?

here are my stuff

amd xp 1700
shuttle AK31A KT266A
GEFORCE2 GTS-V 4X/2X 32MB AGP
WD 80 gig hd
16x dvd
512 ddr2100

Posted: **Tue Feb 05, 2002 8:21 pm**

Reseat the ram and PCI cards, especially the vid card, they're finicky.

Posted: **Tue Feb 05, 2002 8:24 pm**

bet its the video card

Posted: **Tue Feb 05, 2002 8:39 pm**

Recheck everything, make sure your IDE cables are connected properly (red stripe closest to power), make sure everything has power, make sure all your jumpers are set right, make sure your floppy is connected properly (does the light on it stay on? if so it's connected improperly) make sure RAM is in #1 slot, make sure heatsink has good contact with cpu. Set BIOS to defaults, then tweak it after it boots fine.

Posted: **Tue Feb 05, 2002 8:57 pm**

beeps form the system speaker usually indicate that you have seated something incorrectly. Could be ram, video card or CPU.

Posted: **Tue Feb 05, 2002 9:00 pm**

one spot on my ram just burned! wtf?????

Posted: **Tue Feb 05, 2002 9:09 pm**

Here's a good beep guide reference

http://www.pcguide.com/ts/x/sys/beep/

SG Broadband Community

problem booting up the 1st time

problem booting up the 1st time

How many beeps?