SG Broadband Community

Ok ppl i just did the tcp/ip tester and this was what he said....

So my question is this good or do i need to do something more.....

And i am using win98SE with a USB Mxstream Modem..

TnX in Advance.....




TCP options string = 020405b401010402

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which is equal to MSS.

Default Receive Window (RWIN) = 65535
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 65535
Note: Under Windows 9x, if you have RWIN set to any other value, and the Analyzer reports 65535 you might need to install the MS Vtcp386 fix.
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 2621.4 kbps (327.675 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1048.56 kbps (131.07 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 47 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000




830423 connections tested since 03.10.2001.
Analyzer version: Beta 0.99


ShArKeY

Go to Speedguides tweaks here-below in my signature. Once on patch page you need Vtcp386 Fix
patch for your OS (Make sure you get right one) Download and install, reboot, and retest and do this please so I can make sure patch is in:
At top where it says edit click and select, Select all,
Then go back to same edit button at top, click and select copy.
Come back to Speedguide, same thread you were on, in post reply box, with cursor blinking at begining of box go to top, edit, click, select paste, click, this will put information in box. Thank you.

ok here are my result's.....





TCP options string = 020405b401010402

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which is equal to MSS.

Default Receive Window (RWIN) = 65535
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 65535
Note: Under Windows 9x, if you have RWIN set to any other value, and the Analyzer reports 65535 you might need to install the MS Vtcp386 fix.
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 2621.4 kbps (327.675 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1048.56 kbps (131.07 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 47 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000




830684 connections tested since 03.10.2001.
Analyzer version: Beta 0.99


ShArKeY

Did you reboot before you tested

yep i did that

ShArKeY

Only 1 thing left then, set Tcp1323Opts to 1

But how do i do that???

And don't i have to change my recieve window????


ShArKeY

This tells you how and where here

REBOOT after changing to 1