Page 1 of 1

Please some help!!! TNX

Posted: Sun Jul 08, 2001 12:26 pm
by sharkey
Ok ppl i just did the tcp/ip tester and this was what he said....

So my question is this good or do i need to do something more.....

And i am using win98SE with a USB Mxstream Modem..

TnX in Advance.....




TCP options string = 020405b401010402

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which is equal to MSS.

Default Receive Window (RWIN) = 65535
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 65535
Note: Under Windows 9x, if you have RWIN set to any other value, and the Analyzer reports 65535 you might need to install the MS Vtcp386 fix.
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 2621.4 kbps (327.675 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1048.56 kbps (131.07 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 47 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000




830423 connections tested since 03.10.2001.
Analyzer version: Beta 0.99


ShArKeY :D

Posted: Sun Jul 08, 2001 12:31 pm
by cyberskye
Shark,

You might want to post this to the Tweaking Forum.

Have fun,

Skye

Posted: Sun Jul 08, 2001 12:37 pm
by sharkey
Ok Did so......

Sorry for the mix up.....

Admin can you please del this thread......TnX

ShArKeY