SG Broadband Community

Hello forum!

Should need some tips / suggestion to optimize and tweak my network.
I have ADSL and I'm currently using a router called "Thomson TG787".

Here are my results from a pingtest and speedtest:



SPEEDTEST : http://www.speedtest.net/result/1428855904.png

PINGTEST : http://www.pingtest.net/result/45127098.png


Here are my results from the TCP Analyser:

« SpeedGuide.net TCP Analyzer Results »
Tested on: 08.11.2011 20:03
IP address: 81.234.xxx.xxx
Client OS: Windows Vista

TCP options string: 020405b401010402
MSS: 1460
MTU: 1500
TCP Window: 64240 (multiple of MSS)
RWIN Scaling: 0 bits
Unscaled RWIN : 64240
Recommended RWINs: 64240, 128480, 256960, 513920, 1027840
BDP limit (200ms): 2570kbps (321KBytes/s)
BDP limit (500ms): 1028kbps (128KBytes/s)
MTU Discovery: ON
TTL: 50
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)


All tips are appreciated!!! Thanks in advance =]

sorgard6 wrote:Hello forum!


I have ADSL

MSS: 1460
MTU: 1500

Had always thought that ADSL employs MTU of up to 1492 only.

Hm... Should I try 1492 MTU or shall I keep going with 1500?
Btw, why I'm doing this is because my Registry sucks in Counter-Strike 1.6 and I thought this will maybe help me. What I mean by saying that my registry sucks is that my bullet don't hit the target as it should.

Like I said in the thread, All tips are appreciated!!

Also heard that vista got something called "Auto Tuning", is there anyway to inactivate this function?
What I understand the Auto Tuning sets my RWIN to default?

Thanks in advance!

I should really want some help fast, going to bed in 1 hour or something, everyone who have knowledge please help me out! Thanks once again!

sorgard6 wrote:I should really want some help fast, going to bed in 1 hour or something, everyone who have knowledge please help me out! Thanks once again!

Set your MTU to 1492 and see if problem persists.

I changed my MTU to 1492 but didn't noticed any improvements.
Any other ideas?

And btw is it able to go around the "Auto Tuning" and disable it somehow and tweak the RWIN?
I'm going to try the default settings and see if I notice any improvements or deterioration.

sorgard6 wrote:I changed my MTU to 1492 but didn't noticed any improvements.
Any other ideas?

And btw is it able to go around the "Auto Tuning" and disable it somehow and tweak the RWIN?
I'm going to try the default settings and see if I notice any improvements or deterioration.

See: http://www.speedguide.net/articles/wind ... weaks-2574

To turn off the default RWIN auto tuning behavior, (in elevated command prompt) type:

netsh int tcp set global autotuninglevel=disabled

If you're running Vista or 7- leave it alone. You're getting the speeds that you're paying for (although it may not seem like it).