SG Broadband Community

Does TCP Optimizer work with Vista? if so want do you recommend for
advertised speeds are for Comcast 8Mb down / 768Kb up with speedbooster

> Operating System : Windows Vista (TM) Ultimate Professional 6.00.6000

Last Result:
Download Speed: 25800 kbps (3225 KB/sec transfer rate)
Upload Speed: 1881 kbps (235.1 KB/sec transfer rate)

Thanks


« SpeedGuide.net TCP Analyzer Results »
Tested on: 08.16.2007 06:29
IP address: 71.192.xxx.xxx

TCP options string: 020405b40402080a0002494f00000000
MSS: 1460
MTU: 1500
TCP Window: 65160 (NOT multiple of MSS)
RWIN Scaling: 0
Unscaled RWIN : 65160
Reccomended RWINs: 64240, 128480, 256960, 513920
BDP limit (200ms): 2606kbps (326KBytes/s)
BDP limit (500ms): 1043kbps (130KBytes/s)
MTU Discovery: ON
TTL: 36
Timestamps: ON
SACKs: ON
IP ToS: 00100000 (32)
Precedence: 001 (priority)
Delay: 0 (normal delay)
Throughput: 0 (normal throughput)
Reliability: 0 (normal reliability)
Cost: 0 (normal cost)
Check bit: 0 (correct)
DiffServ: CS1 001000 (8) - class 1 (RFC 2474). Similar forwarding behavior to the ToS Precedence field.

Nobody's figured out how to adjust Vista's TCP/IP stack but judging by your speed test results and the tier of service that your on, I'd say your good to go. Vista TCP/IP stack is self adjusting for the most part.