Page 1 of 1
During the installation........
Posted: Wed May 30, 2007 4:16 am
by enarceus
During the installation of Windows NT on your dual processor motherboard with two processors, only one CPU is detected. Why is the second CPU not detected?
Posted: Wed May 30, 2007 7:01 am
by YeOldeStonecat
Which version of NT?
And you're positive the BIOS is enabling the second CPU?
Which motherboard and processor(s)?
Posted: Wed Jun 27, 2007 5:11 am
by enarceus
Which version of NT?
windows NT 3.1 version
Which motherboard and processor(s)?
d850 emvr motherboard and processor is p4 3.0 ghz!
Posted: Wed Jun 27, 2007 8:26 am
by A_old
Sweet jesus -- NT 3.51?????
See if this is helpful
http://www.tyan.com/archive/support/html/f_tm.html -- specifically #12.
Please, do tell why you wouldn't use an OS that MS at least still supports (older software that will not run?)
Posted: Wed Jun 27, 2007 2:03 pm
by A_old
enarceus wrote:windows NT 3.1 version
d850 emvr motherboard and processor is p4 3.0 ghz!
What model P4? are you sure it isn't a hyperthreaded single core proc, at which point you probably need to enable hyperthreading in the bios and reinstall NT 3.51.
Posted: Wed Jun 27, 2007 2:22 pm
by Brk
Give me your Paypal address and I will send you some money to buy an OS from this century.
Posted: Wed Jun 27, 2007 2:30 pm
by YARDofSTUF
Burke wrote:Give me your Paypal address and I will send you some money to buy an OS from this century.
Posted: Wed Jun 27, 2007 3:18 pm
by A_old
Burke wrote:Give me your Paypal address and I will send you some money to buy an OS from this century.
Posted: Mon Aug 20, 2007 8:29 am
by enarceus
Burke wrote:Give me your Paypal address and I will send you some money to buy an OS from this century.
Are you sure!
~~~~~~~~~~~~~are you very rich?~~~~~~~~~~~~~
what this century means?
Posted: Mon Aug 20, 2007 4:52 pm
by A_old
a century is a 100 year period..so he means an operating system released after the year 2000