SG Broadband Community

Or whatever port I'm supposed to have opened/closed in order for Azureus to run?
I'm got a 'nat error' apparently.

I'm using Nortons Anti Virus, running Win XP.

And yes... I have read other posts/replies but they haven't really helped myself.

I've tried that http://192.000.00 ip thingy also, that gives me 'page cannot be displayed'.

I'm using wireless, not linksys, belking54...

Oh and please.... no computer jargon.....it blows me away really. lol

Thanks in advance!

the ip referenced in this thread wont work for a belkin g.... gotta look in your manual to find the ip to setup your router...I'll help if you come back but most don't

Rest assure, I'll be back.

This forum page is now my "homepage". So I'm forced to remember my problems everytime I click on explorer..

lol

Ok, so what do you want me to get from the manual?

greaTER wrote:Rest assure, I'll be back.

This forum page is now my "homepage". So I'm forced to remember my problems everytime I click on explorer..

lol

Ok, so what do you want me to get from the manual?

I only have a linksys router so i'm not familiar with a belkin but it works in a similar way ....inside the manual there should be and ip address to configure the router ...more than likely it's something like 192.168.xxx.xxx.... type that into your address bar and hit enter....from there you should see a configuration page.... and from there look for a tab or link to 'ports or applications' ...my linksys labels it 'applications and gaming' so it should be something similar to that .....look for that first and let me know if you find ....we'll take it from there.

edit> here is the ip

http://192.168.2.1 for your router

I don't have the manual.

But after going to Accessories> Command Prompt, and typing in "ipconfig", the similar number I got was

192.168.2.1

But when I type it in the address bar, nothing happens.

Izzo wrote:I only have a linksys router so i'm not familiar with a belkin but it works in a similar way ....inside the manual there should be and ip address to configure the router ...more than likely it's something like 192.168.xxx.xxx.... type that into your address bar and hit enter....from there you should see a configuration page.... and from there look for a tab or link to 'ports or applications' ...my linksys labels it 'applications and gaming' so it should be something similar to that .....look for that first and let me know if you find ....we'll take it from there.

Ahhh great.

Had to add the http part.

Ok, so now what happens??
I tried to type in "admin" as I had previously seen in the other post, but that didn't work.

----edit

So I read what it says... and it just tells me to hit submit, which I did..and I am in somewhere with a blue boxs and lots of numbers and jargon..

Shall I copy & paste that here??

Izzo wrote:edit> here is the ip

http://192.168.2.1 for your router

greaTER wrote:Ahhh great.

Had to add the http part.

Ok, so now what happens??
I tried to type in "admin" as I had previously seen in the other post, but that didn't work.

----edit

So I read what it says... and it just tells me to hit submit, which I did..and I am in somewhere with a blue boxs and lots of numbers and jargon..

Shall I copy & paste that here??

that will help ...do you know how to post images ?


That would help ... i believe if you type admin for your user and i believe the default password is

erm... nope..

How do I post them?? (images that is)


Oh, and on another side note, how can I get the strength of the wireless to be the same strength all over the house?, some places it says 'low', others 'high', etc... is there somewhere in this belking thingy that I can make the strength excellent all over the house??

Izzo wrote:that will help ...do you know how to post images ?


That would help ... i believe if you type admin for your user and i believe the default password is

greaTER wrote:erm... nope..

How do I post them?? (images that is)


Oh, and on another side note, how can I get the strength of the wireless to be the same strength all over the house?, some places it says 'low', others 'high', etc... is there somewhere in this belking thingy that I can make the strength excellent all over the house??

signal strength depends on what you got in between it ...some parts of your house will get a better signal depening on how big your house is .... obviously th e closer to your router the strong the signal will be ... just hit print screen ...save it is a .jpg file and email it to me ...did you see anything related to ports when you looked at your configuration page ?

hhmm. I don't see anything there that mentions ports...

but I have pasted the image in Word.. so what's your email addy? Shall I send as attachment?

Izzo wrote:signal strength depends on what you got in between it ...some parts of your house will get a better signal depening on how big your house is .... obviously th e closer to your router the strong the signal will be ... just hit print screen ...save it is a .jpg file and email it to me ...did you see anything related to ports when you looked at your configuration page ?

greaTER wrote:hhmm. I don't see anything there that mentions ports...

but I have pasted the image in Word.. so what's your email addy? Shall I send as attachment?

Yes, that's fine.....knudjm at hotmail dot com (excuse the form, i don't want spambots picking this up)

Thanks.

You can remove your email addy now if you like. lol

greaTER wrote:Thanks.

You can remove your email addy now if you like. lol

nothing yet....it send ok?

Nothing yet???

Yea I sent it already.

Lemme try again.

Izzo wrote:nothing yet....it send ok?

Ok, I just sent it again, it might be in your junk mail folder??

greaTER wrote:Nothing yet???

Yea I sent it already.

Lemme try again.



Ok, I just sent it again, it might be in your junk mail folder??

sent you a private message with a different one ...this shouldnt take too long after i get it

ahh

Please resend..

Google blocked it. lol

But pop ups are now "ok"

Izzo wrote:sent you a private message with a different one ...this shouldnt take too long after i get it

greaTER wrote:ahh

Please resend..

Google blocked it. lol

But pop ups are now "ok"

I got it.... I took a look ...sent you a PM ..test it out and let me know.

hhmm

So I sent you a new screenshot.

Lots of triggers!

lol

Izzo wrote:I got it.... I took a look ...sent you a PM ..test it out and let me know.

greaTER wrote:hhmm

So I sent you a new screenshot.

Lots of triggers!

lol

ya, for multiple apps ..you only need 1

http://portforward.com/english/routers/ ... orrent.htm
link with detailed steps on how to port forward for bit torrent.

mmione wrote:http://portforward.com/english/routers/ ... orrent.htm
link with detailed steps on how to port forward for bit torrent.

yep , sent him that already

Izzo wrote:yep , sent him that already

"her"



but yea, working on that will get back to you today with progress or lack of..

lol

hi..

so I sent you an email of latest screenshots.. and 2 msgs via here.

I done what was said on that link you sent me to.

thanks!

greaTER wrote:"her"




lol

beware of Brent.

[quote="Izzo"]beware of Brent. ]

She's safe as long as her last name isn't jpg, avi, wmv or mpg/mpeg

cyberskye wrote:She's safe as long as her last name isn't jpg, avi, wmv or mpg/mpeg

lawwl....She'll get the customary a/s/l blah blah blah.....

Who's Brent??

Is he cute??

lol


[quote="Izzo"]beware of Brent. ]

greaTER wrote:Who's Brent??

Is he cute??

lol

Careful what you ask for... you just might get Brent. Stalking comes to mind... when I think of Brent

greaTER wrote:Who's Brent??

Is he cute??

lol

You might wanna edit that post...lol

MadDoctor wrote:Careful what you ask for... you just might get Brent. Stalking comes to mind... when I think of Brent

lol

I've had my share of e-stalkers before.

Brent don't bother me.

lol

Hi

A/S/L ?

Brent wrote:Hi

A/S/L ?

Brent wrote:Hi

A/S/L ?

lol

I'm having problem opening a port so i can play a game. Can anyone help. I have a netgear router