Page 1 of 1

Linksys Question

Posted: Tue Nov 16, 2004 12:43 am
by hjm357
Anybody know the difference between the Linksys WRT54G wireless router and the one they ship with their "wireless G kit for notebooks" (WKPC54G)? The obvious difference I see is that the notebook one has only one antenna and I'm wondering why they would manufacture a new router design just for the purpose of bundling it with a wireless card. From what I see all the other similar products have two antennas. It is stripped down in other ways?

Here's the link on that kit:
http://www.linksys.com/products/product ... 5&prid=614

Posted: Tue Nov 16, 2004 7:23 am
by crazyjw1971
I would stay away from the WKPC54G. I set one up for someone and it has been nothing but problems. And the firmware is up to date :rolleyes: ...

Get the WRT54G. If you are up to it, get one of the "aftermarket" (Sorry, I drag race :thumb: ) firmwares. I run a WAP54G with one of the "aftermarket" firmwares and I dont have a problem.

Posted: Tue Nov 16, 2004 12:14 pm
by hjm357
actually, i already have a wrt54g, i was just curious.

where can i download a copy of this firmware?

Posted: Tue Nov 16, 2004 3:16 pm
by crazyjw1971
http://www.hyperdrive.be/portal/

Im using the HyperWAP firmware. You will need the HyperWRT firmware.

***USE AT YOUR OWN RISK!!!*** If something goes wrong, Linksys WILL NOT help you...

Posted: Thu Nov 18, 2004 4:17 am
by ins_
thanks for the link crazy, but i dont notice any better speeds/reception once i turn the antenna settings up

did you?

Posted: Thu Nov 25, 2004 11:31 am
by crazyjw1971
Yes, I did actually. How high did you turn up the power? Im running at 48...

Posted: Thu Nov 25, 2004 11:32 am
by crazyjw1971
Also, you might wanna try Netstumbler and see if you have a lot of noise in your signal...

Posted: Sat Nov 27, 2004 4:32 pm
by ins_
I'm having some trouble with Netstumbler, dunno what/how it is supposed to work.

Do I have to broadcast my SSID? Currently, I do not have it broadcasted.