Page 1 of 1
Got a BareBone and a prob:
Posted: Tue May 25, 2004 1:22 pm
by Thor Walez
I got this fine Shullte SN45G with a XP2500+@3000+ (400) and a NV5900XT
My prob is that the HDD LED is permanent enlighted and with HD traffic it goes brighter... Changing + and - in any possible setting won´t have helped!
What is to do next? Behind the front panel I have no access! The permant Orange LED is killing me .... *grmbl*
-Thor
Posted: Tue May 25, 2004 1:50 pm
by YARDofSTUF
unplug it?
Posted: Tue May 25, 2004 1:53 pm
by Thor Walez
YARDofSTUF wrote:unplug it?
lol yos!
i do not want a permant light with some brighter flashing I WANT THE ORIGINAL ...
-Thor
Posted: Tue May 25, 2004 1:56 pm
by YARDofSTUF
Dunno, to me it sounds like you have it plugged in, in the wrong spot.
Posted: Tue May 25, 2004 2:30 pm
by deleted_acct
So what your saying is
The light is always on and when you have hardware activity it gets brighter?
Posted: Tue May 25, 2004 3:55 pm
by BaLa
sounds like it is either made that way...or it just doesn't work the way it is supposed to...
Posted: Tue May 25, 2004 4:01 pm
by Thor Walez
Chillinhh wrote:So what your saying is
The light is always on and when you have hardware activity it gets brighter?
YES so it is!
And BaLa it is not supposed to be b/c a friend of mine got the same BB just a week earlier and the HDD LED was functionally as it supposed to be: ON if traffiv and OFF if idle!
-Thor
Posted: Tue May 25, 2004 4:22 pm
by deleted_acct
It might be your led, im not sure, your mobo could be the problem because it isnt cutting off the power to the led when theres no activity.
Posted: Wed May 26, 2004 11:33 am
by Thor Walez
A small stripe of black tape will serve me well ... I can hear a little rattering ... will keep me knowing if the machine is hang up or not!!!
The thing is that the mobo and case is manufactured by shuttle - all cable (Power, usb, firewire and leds) are plugged in! ...
n/p but I am a perfectionist
Posted: Wed May 26, 2004 11:43 am
by TrevGlas
Thats what my case did when I plugged it into the wrong spot... read the mobo manual carefully
