Page 1 of 1
I need Help!
Posted: Sun Apr 13, 2003 1:12 pm
by DREK
This happens today..
When I go to Control Panel/Network Connections... There isn't the icon with my connection .
That's my Question:
How can I reback this icon? ( to acess Tcp/ip properties... Firewall and so on)...
It seem be urgent!
Posted: Sun Apr 13, 2003 4:28 pm
by DREK
Up
Posted: Mon Apr 14, 2003 3:37 pm
by mccoffee
Is there an icon that is two computers in the bottom corner where the clock is
In Open Control Panel.
* Double-click Network and Dial-up Connections.
* Identify the icon for your cable modem connection: usually Local Area Connection.
* Right-click that icon and select Properties.
* Under the ethernet adapter icon, click the button Configure.
* Click the tab Advanced to bring it to the front:
* In the Property box, the property name to be selected varies according to model of ethernet card. Examples are: Network Link Selection, Media Type, Connection Type, Duplex Mode, or any similarly-named property which can have Values looking like Auto-Negotiation, or 10BT, or 10BaseT.
* In the Value box, select a value which either (a) explicitly says half-duplex or semi-duplex, or (b) at least does not say full-duplex [e.g. 10BaseT on its own is OK]. If there is a choice between 10 and 100 with half-duplex, choose the 10. Do not choose 10Base5, 10Base2, or AUI.
* Click OK to exit the Adapter settings.
* Click OK to exit the Connection properties.