SG Broadband Community

Originally posted by Buggyman
Over here--->CableNuts Software Forum

Lance... the Guys has been real busy these days and don't come over here that often.
If There is a question concerning any of the BroadbandNuts programs they need to be posted over here--->CableNut Software Tech Support
I think you will get a quicker response from them and we must remember that while Speedguide and CableNut enjoy's a good relationship .. we do need to keep the questions concerning the softwares in the right BB forums ok?
Thanks Buggy

^

;0

the pics didnt come out and would love to have them so i know exactly what i am doing because i would love to see how it works and how much it speeds stuff up.

any help appreicated
thanks

The directions can be found on help page below in sig, the next page at top, click on help guides, you will see it

not to step on Lobo but you can just click on the link in my sig to go straight to the 2K RamDisk

WoW

dannjr
this tweak really works but i seen more than 2 files on the ram drive on some pic is there only post to be really 2 files for it on win2k pro to speed up web sites , etc a lot?
or can i do anything else to speed stuff up ?

Sorry about asking this if it has been asked already but I don't want to read the other 24 pages to see if it has. But are you able to do this tweak on Win98SE yet? If you can how do you? Thanks

imtim83
As things go right now.There can be. just be careful of the size of the drive. did you go through the guide on here for 2k
http://www.broadbandnuts.com

ExtremistAS
Yes there is on this link
Was just updated today
http://www.broadbandnuts.com/ramdrive.shtml

dannjr
i went thru there and followed it like it said.
seems faster for sure but what else can i do thats not on there to speed me up more maybe?

btw i made the size of the ram disk as 2MB is that ok ? or should it be bigger ?
and i have a problem where the internet isnt up when win2k pro boots up i hae to double click on my TCP.CMD file in C:/ to get my internet to work everytime i bootup win2k pro.


thanks

didn't notice but thx for puttin me on the page Dan I feel like special lol

Originally posted by lance
didn't notice but thx for puttin me on the page Dan I feel like special lol

Originally posted by imtim83
btw i made the size of the ram disk as 2MB is that ok ? or should it be bigger ?
and i have a problem where the internet isnt up when win2k pro boots up i hae to double click on my TCP.CMD file in C:/ to get my internet to work everytime i bootup win2k pro.


thanks

imtim83
Yes its fine to set it larger esp. if you plan to add to it later.
Sorry didnt answer this sooner but I got busy

Originally posted by jsiu
this sounds good!

but how do you make a ramdisk? is there somewhere in win2k that does this? or one need a 3rd party software? (if so, which is the best?)

second question: where is the registry entry to change the location of the file?

thanks

DiDO!

On help page below in signature click, on 1st page at top under help guides, you'll see it


Well it was their, their updating so check back in aliitle and it will be up sir

Not sure why but I recieved a email saying that someone posted here.

same

oh well, perhaps you people will think of another "crazy man tweak" SG has been without one for some time.

I've installed Ram Drive and followed the setup guide, but when the batch file runs, it says it can't find the drive specified (which is X the ramdrive I'm trying to create. Can someone help me with this?

ICQ 10115558
buzz@sassyart.com

Thanks in advance,
Buzz

will this tweak produce a better ping in online games like counter strike? and if so what are all the steps into making it work under windows98se...sorry for the question but reading through all these pages makes my head spin. if there is already a guide written pls tell me the link.

thx for the help.

hi,
this ramdisk is ok, but can you explain how to move the cookies to it and how to save and reload the temp internet files if logged off and on.Tried a batch file with xcopy command, it saves all on the ramdrive exept the temp inet files?
Thanks in advance.

Open IE, tools, Internet options, settings for temp. files, redirect it to the Ramdrive.

that doesn't move cookies nor history.I did some regedits but
not enough I guess?
Do you know how to synchronize those when logging of and
load them when logging on.I've read about an image file, any idea?
Thanks alot
regards

Eugene, Administrator of AFD tweaks! I redirected afd & tcpip's as you described.Works very fine!!! , the services which don't start automat. should they be set to ''on demand'' in xp device manager, hidden devices -instead of system to make them start
Does dial up needs dhcp, netbios or dns?
Do you know how to get an x121 number from ones isp tel no?
Thanks in advance,

Originally posted by winuser
that doesn't move cookies nor history.I did some regedits but
not enough I guess?
Do you know how to synchronize those when logging of and
load them when logging on.I've read about an image file, any idea?
Thanks alot
regards

1) there's a software available that can load the image when started up but it's shareware and you can only use it 100 times. If you want to try it out, reply and I will post a link.

2) If you read the updated Tutorial at http://www.broadbandnuts.com you will see a batch file which can load up the 2 TCP and AFD images in Ramdisk.

Originally posted by winuser
Eugene, Administrator of AFD tweaks! I redirected afd & tcpip's as you described.Works very fine!!! , the services which don't start automat. should they be set to ''on demand'' in xp device manager, hidden devices -instead of system to make them start
Does dial up needs dhcp, netbios or dns?
Do you know how to get an x121 number from ones isp tel no?
Thanks in advance,

What do you mena by not starting automaticlly?

Also, I believe dialup need all three, and I don't know what you meant by x121 number...

the dhcp ,dns clients, inet-firewall, netbios helper, ipsec Services don't start in computer management, services.Device manager's hidden recources show afd, tcpip with a yellow circle, I've tried all the diff. kind of startups eg boot, automat. demand, system.No luck.Strange thing is that those non pnplay "hidden devices" describe that they're not working well, but in the second tab the service was started! while they've this yellow mark and in computermanagement services they havent started.I've made the services to autorecover(restart themselves) with an interval of 6 min for each three times, no luck either.
In gpedit.msc I made the system wait for the network before showing desktop/logging on, they're running synchronic.

I tried to find a kind of macro which dubbelklicks them services to start them but I hope you can help here, cause its a very good tweak!!!!
Daniël Koolen
Holland

Originally posted by winuser
the dhcp ,dns clients, inet-firewall, netbios helper, ipsec Services don't start in computer management, services.Device manager's hidden recources show afd, tcpip with a yellow circle, I've tried all the diff. kind of startups eg boot, automat. demand, system.No luck.Strange thing is that those non pnplay "hidden devices" describe that they're not working well, but in the second tab the service was started! while they've this yellow mark and in computermanagement services they havent started.I've made the services to autorecover(restart themselves) with an interval of 6 min for each three times, no luck either.
In gpedit.msc I made the system wait for the network before showing desktop/logging on, they're running synchronic.

I tried to find a kind of macro which dubbelklicks them services to start them but I hope you can help here, cause its a very good tweak!!!!
Daniël Koolen
Holland

Ack.. can't understand what you are trying to say...

Put your problem in say.. 2 sentences and I will figure it out for you. Just name the problem, don't worry about the details yet.

6 services don't work capiche ?


no details, yeah right thanx anyway

Hey everyone! Merry Christmas!

So, I don't get something: (I THINK EVERYONE SHOULD READ THIS CAREFULLY)

I disabled the ramdrive like 10 minutes ago. Uninstalled it. Drive Z is gone. I cannot access it anymore. I didn't need to reboot, it just unloaded the driver. And nothing happened.

I even moved the 2 sys files away from \systemroot\system32\drivers\ - and deleted them from the 'dllcache' folder so that WFP would not be able to reinsert them if the system searched for them on that path... still, nothing happens. I have like 7 IE windows open one of them is a download window, I'm also downloading something from an FTP I'm connected to 2 IRC networks and to ICQ... and everything works fine.

Why?

I mean if it really mattered where we stored the 2 files... if the system really needs to access them from time to time and not just loads them up into memory or caches them, if they indeed speed up broswing and other activities, shouldn't I get an error message or something? A BSOD?

Have I proven that this does not do anything? Or am I just lucky that my 466Mhz Celeron with its 256 megs of RAM and 10-12 running programs (browser windows are separate processes) doesn't swap often?

Help me here guys. I'm on Windows XP.

Windows XP Update :

Installing the Ramdisk sample driver in a NTFS only machine might make it unusable. To resolve this problem make the following change:

While you call the IoCreateDevice function (RamdiskAddDevice function in pnp.c), change the device type from FILE_DEVICE_VIRTUAL_DISK to FILE_DEVICE_DISK and recompile the driver. After you install the driver, restart the system in order to access the Ramdisk through Explorer.

Ok I followed the directions ok till I got to the part where the ramdisk don't work on xp can someone help?

OS is Windows xp pro hard disks are NTSF

I'm running Win98SE, and I've had success with the patch with an improvement of 10-20 ms on average. I really like this Ramdisk idea so far, so would it work if I were to throw other drivers into it? What else is as commonly accessed as the TCP/IP drivers?

Originally posted by Aethaellyn
I'm running Win98SE, and I've had success with the patch with an improvement of 10-20 ms on average. I really like this Ramdisk idea so far, so would it work if I were to throw other drivers into it? What else is as commonly accessed as the TCP/IP drivers?

I am coming up with ideas.. Wait for a week or two and check the front page for an article on what else you could use.

if your isp gives you a max speed of 500kbps ram disk cant change that speed....it's not up to ram disk, it's your internet provider who decides it

I must have missed something somewhere i have the tweak runing but it seems i have to start the process manualy each time i turn on my box XP Pro. There does not seem to be any noticable gain at this time. Now starting up the process each time is a Pain any ideas on how to get it to work automaticaly.


Slacker

rockin

This thread is so old, if you want never instructions from same people go to for 9x and 2x:

http://dslnuts.com/ramdisk.shtml

You are right it is old, but I went to another Forum and told some guys that you could load your TCP/IP in a RAMdisk and they thought I was SCREWED UP!!

ALso what is good here is the discussion factors because you can see what problems people had and how they fixed them.

You are right it is old, but I went to another Forum and told some guys that you could load your TCP/IP in a RAMdisk and they thought I was SCREWED UP!!

ALso what is good here is the discussion factors because you can see what problems people had and how they fixed them.