Results 1 to 9 of 9

Thread: Thanx to Hybrid....I got pics loaded....

  1. #1
    ~'~|D|HawaiianGhost~'~ HawaiianGhost's Avatar
    Join Date
    Feb 2002
    Location
    In a chair, in front of my rig, staring at my avatar... <(0.0)>
    Posts
    1,340

    Thanx to Hybrid....I got pics loaded....

    Here's some rezult'z (especially for LT-73 who advised a little):



    Yeah o.k., for those of you who did not see my first thread awhile ago, this is just a bench of my upgrades *see SIG*, compared to my last mobo (GA-7IXE4) which I had a HELL of a time breakin' 3000pts!! I'm waitin' on new CPU, Vid Card & maybe pick up another 512 stick soon. This is my first major upgrade in about 1-2yrs. I have two more rig designs planned for next year too.
    I do have some issues though with these settings:




    i.e. my AGP is set to 4x but disabled to 1x!? I think it's because of my FSB setting. I don't know what the CPU/memory Freq is supposed to be set to but it seems to be workin' fine, no overheat probs. And I cannot set CPU Freq lower than 11x without locking up b4 boot to OS. Also, how high can the vcore be before dangerous levels? I read about alot of ppl set at either 1.75v-1.85v (I understand the lower the better but then you get limited). I can go to 112 on fsb, bit decided to see what you guys think.

    Anybody got suggestions? I already have plans with component upgrades so I don't need those types of inputs...Thanx in advance...
    DA' BEAST:
    Win2000Pro/WinXpPro SP2||AMD AXP 2700+ T-Bred 2.2GHz w/Thermalright SLK-800 & Tt Smart FanII||ASUS A7V333/R||1GB PC2700 Corsair VS||Lite-On 52x CD-Rom||Yamaha CRW-F1ZEN 44x24x44 Burner||2xWD800JBSE in RAID-0, 1xWDSE800JB & 1xWDSE1600JB backups||SBAudigy OEMBulk||Enermax EG465AX-VE
    Chaintech GF4 Ti4200 128MB "GT21" w/ViVo SE

    --------------------------------------
    Game with the ~RealmOfGhost'z~, [SG], |D|

  2. #2
    Reigning Genious aagiants's Avatar
    Join Date
    Jan 2001
    Posts
    5,941
    to get better pic, hit ali print srn, it takes a pic of that window only... save as jpg too

  3. #3
    ~'~|D|HawaiianGhost~'~ HawaiianGhost's Avatar
    Join Date
    Feb 2002
    Location
    In a chair, in front of my rig, staring at my avatar... <(0.0)>
    Posts
    1,340
    Thanx aagiants, will do that next time. Oh, LT-73, thanx for that other link I'll check that one out later, I kinda' like this one that Hybrid....." suggested.

  4. #4
    Folding Thunder
    Join Date
    Mar 2002
    Location
    New York The Empire State
    Posts
    10,543
    Ok HG. That Vid card is holding you back . Also once you overclock that T-bird, it's gonna get hot ! T-birds tend to run hotter than the xp chip.

  5. #5
    Cyber Techie cy's Avatar
    Join Date
    Dec 2000
    Location
    Toronto, Canada
    Posts
    3,060
    man! nice score for TB /w GF2 MX!!

    I have ThunderBird 1Ghz running at 11.5 x 103Mhz FSB, 1185Mhz with 1.85VCore, temps seems perfectly fine, 32C Idle and 45C Loaded. So if you have a good HSF, you should up your VCore a little to gain more stability and push more juice out of it

  6. #6
    ~'~|D|HawaiianGhost~'~ HawaiianGhost's Avatar
    Join Date
    Feb 2002
    Location
    In a chair, in front of my rig, staring at my avatar... <(0.0)>
    Posts
    1,340
    I know the vid card is a prob. But it's all I got for now. what about the settings do they look good?

    As for heat I have the Chieftec Dragon Mid tower series with the following:

    1x80mm front intake
    1x80mm side panel (hits vid card and a little of the RAM)
    1xPCI slot exhaust fan covering vid card (brought heat down majorly)
    2x80mm Titan case exhaust fanz
    HHC-001 @ 7200-7600rpm (look @ pic it reads 7900+rpm)
    Enermax Dual FAN(80 & 90mm silent) EG365P-VD FM PSU

    Alot cooler than it was in my older generic case w/a cheapa** Suntek 250w. So I think I am covered pretty good. B4 my case upgrade I was running alot hotter somewhere around 55*C+...

  7. #7
    Folding Thunder
    Join Date
    Mar 2002
    Location
    New York The Empire State
    Posts
    10,543
    It looks really good HG

    Now all you gotta do is drop the multi's and raise fsb in increments of 5. You might have to add a notch of voltage to the cpu and ram to be able to get higher speeds. And remember to keep your eyes on those temps!

  8. #8
    ~'~|D|HawaiianGhost~'~ HawaiianGhost's Avatar
    Join Date
    Feb 2002
    Location
    In a chair, in front of my rig, staring at my avatar... <(0.0)>
    Posts
    1,340
    Originally posted by LT-73
    It looks really good HG

    Now all you gotta do is drop the multi's and raise fsb in increments of 5. You might have to add a notch of voltage to the cpu and ram to be able to get higher speeds. And remember to keep your eyes on those temps!
    I have my eye on those temps 24/7. Will adding voltage (next setting is 1.80v will probly read 1.85v though), enable me to lower "Multi's". Because I tried that with current setting and it failed to boot. ASUS C.O.P. (CPU Overheat Protection) feature said, "System failed due to CPU Overclocking..." Supposed to prevent your CPU from Frying by stopping boot process. All I do is shut down and reset BIOS (just FSB, everything else stays as is). I couldn't even lower multi to 10.5x w/current settings.
    DA' BEAST:
    Win2000Pro/WinXpPro SP2||AMD AXP 2700+ T-Bred 2.2GHz w/Thermalright SLK-800 & Tt Smart FanII||ASUS A7V333/R||1GB PC2700 Corsair VS||Lite-On 52x CD-Rom||Yamaha CRW-F1ZEN 44x24x44 Burner||2xWD800JBSE in RAID-0, 1xWDSE800JB & 1xWDSE1600JB backups||SBAudigy OEMBulk||Enermax EG465AX-VE
    Chaintech GF4 Ti4200 128MB "GT21" w/ViVo SE

    --------------------------------------
    Game with the ~RealmOfGhost'z~, [SG], |D|

  9. #9
    ~'~|D|HawaiianGhost~'~ HawaiianGhost's Avatar
    Join Date
    Feb 2002
    Location
    In a chair, in front of my rig, staring at my avatar... <(0.0)>
    Posts
    1,340
    Well thanx, to those that replied and to those that will. I gotta go for now. Will try out suggestions from all those that responded and those to come...I love this place *tear in my eyes*

    B Back Latah'z!!!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •