did you cut that window your self or what , looks good.
Unfortunately no, Lian-Li did it for me.
![]()
Crackin' skulls and breaking kneecaps.
That's the case I'm doing my next mod with, can't wait to get started. I just don't have enough money for the hard drives yet. I'm going to take out the 40Gig, IBM GXP 60's out of my server and put them in my game pc, and get two of the 80Gig IBM Deskstar 120GXP's for the server. I need more storage and that should hold me for a while.![]()
Sliding down the banister of life ..........................
I'm thinking of getting two more Maxtor drives and setting them up RAID with the two I have now. Kinda overkill on the drivespace but you know what I say "if it can be done, do it."
oh btw it is a sweet case, I love it and so do my friends. They were all like ooohhh aahhhh. LOL
Crackin' skulls and breaking kneecaps.
I've been checking out cases, very nice. Just learning about this stuff, so probably a stupid question but are these cases better as far as heat transfer, noise stuff like that?
Thanks
![]()
"We don't see things as they are. We see them as we are."
Heat transfer, yes. noise, well i'm not sure what you're asking. inside the front of the case(behind all those holes) are 2 80mm fans, plus one in the back, plus 2 on the ps, and soon to be one more in the top. I don't believe it's any noisier than any other case with the same amount of fans though.
![]()
Crackin' skulls and breaking kneecaps.
I'm gonna be getting a pre-cut Lian-Li box soon, too. ThinkGeek.com has a nice one, and they also sell other modding equipment like cool cathode and neon tubes, light strips, etc.
Here's a combination picture and link... click on the picture to go to the page for this product:
Not bad if I do say so myself...
that is a sweet ass lookin rig you got there Grimson
i like the thermaltake you got there
thats the volcano7 right?
AMP
Gigabyte ga-7n400 pro nForce2 mobo, Athlon XP3200, thermalright slk900, 1 gig corsair pc3200 cas2, radeon 9800pro, SB Audigy 2 ZS
case= yeong yang YY-B0221 server cube,550 watt Antec true power,1 wd raptor 74 gig,1 34gig raptor (page) 2 wd 120gig se's raid 1, 1 120gig se. WIN xp Pro, Dual display samsung syncmaster 1100df 21in(Primary) Samsung syncmaster 955df 19in (secondary)".
thanks, yep that's the volcano7.
Crackin' skulls and breaking kneecaps.
what temps you getting with it?Originally posted by grimson
thanks, yep that's the volcano7.
what chip you running?
AMP
Gigabyte ga-7n400 pro nForce2 mobo, Athlon XP3200, thermalright slk900, 1 gig corsair pc3200 cas2, radeon 9800pro, SB Audigy 2 ZS
case= yeong yang YY-B0221 server cube,550 watt Antec true power,1 wd raptor 74 gig,1 34gig raptor (page) 2 wd 120gig se's raid 1, 1 120gig se. WIN xp Pro, Dual display samsung syncmaster 1100df 21in(Primary) Samsung syncmaster 955df 19in (secondary)".
nevermind on the cpu part.....just read your sig
AMP
Gigabyte ga-7n400 pro nForce2 mobo, Athlon XP3200, thermalright slk900, 1 gig corsair pc3200 cas2, radeon 9800pro, SB Audigy 2 ZS
case= yeong yang YY-B0221 server cube,550 watt Antec true power,1 wd raptor 74 gig,1 34gig raptor (page) 2 wd 120gig se's raid 1, 1 120gig se. WIN xp Pro, Dual display samsung syncmaster 1100df 21in(Primary) Samsung syncmaster 955df 19in (secondary)".
Not bad at all, hopefully by the time I'm rerady for my next one they will have some new ones out, if not I'm going to get the pc-12 and mod the hell out of it.Originally posted by BDA7DD
I'm gonna be getting a pre-cut Lian-Li box soon, too. ThinkGeek.com has a nice one, and they also sell other modding equipment like cool cathode and neon tubes, light strips, etc.
Here's a combination picture and link... click on the picture to go to the page for this product:
Not bad if I do say so myself...
![]()
Crackin' skulls and breaking kneecaps.
I didn't mean yours was noisy. lol I meant from time to time ours is. Just didn't think ours was normal is what I was getting at. It doesn't happen all the time, like right now I hardly hear it and other times don't laugh it sortof grunts. Don't know how else to explain it but that's what it sounds like. This one only has one fan, could that be why it gets noisy?Originally posted by grimson
Heat transfer, yes. noise, well i'm not sure what you're asking. inside the front of the case(behind all those holes) are 2 80mm fans, plus one in the back, plus 2 on the ps, and soon to be one more in the top. I don't believe it's any noisier than any other case with the same amount of fans though.
![]()
Thanks![]()
"We don't see things as they are. We see them as we are."
naw....
your fan(s) is/are prolly dying..
how can I not laugh at that ??Originally posted by Suzie
... and other times don't laugh it sortof grunts.
Amp - I don't know I haven't checked the temps in awhile. I noticed it was running a little warm b4 I installed the Volcano, I think they were around 52 on the proc/ 38 on the board. That's why I will be cutting a hole in the top of this case. In alot of reviews I have read, they say the volcano is not an overclockers HSF as it doesn't perform as well as some others like the alpha but I like the way it looks, how quiet it is, and it does the job.
![]()
Crackin' skulls and breaking kneecaps.
I know it even makes me laughOriginally posted by grimson
how can I not laugh at that ??
![]()
Well figured it out it was dirty lol, so far no more unidentified sounds
Sheesh and I thought I was being pretty descriptive.
Edit:BTW, sorry to horn in on your thread![]()
"We don't see things as they are. We see them as we are."
No problem.
AMP -
I checked my temps lastnight and they were 47 proc/33 mobo / full load.
Crackin' skulls and breaking kneecaps.
Bookmarks