Results 1 to 2 of 2

Thread: TCP/IP Analyzer Results

  1. #1
    blindpyro
    Guest

    Post TCP/IP Analyzer Results

    TCP options string = 020405ac0103030001010402

    MTU = 1492
    MTU seems to be optimized for PPPoE... If you are not on a PPPoE connection, consider increasing your MTU to 1500 for optimal throughput.

    MSS = 1452
    Maximum useful data in each packet = 1452, which is equal to MSS.
    MSS is optimized for PPPoE. If you are not on a PPPoE connection, consider increasing your MTU value.

    Default Receive Window (RWIN) = 22380
    RWIN Scaling (RFC1323) = 0 bits
    Unscaled Receive Window = 22380
    For optimum performance, consider changing RWIN to a multiple of MSS.
    Other values for RWIN that might work well with your current MTU/MSS:
    511104 (MSS x 44 * scale factor of 8)
    255552 (MSS x 44 * scale factor of 4)
    127776 (MSS x 44 * scale factor of 2)
    63888 (MSS x 44)

    bandwidth * delay product:
    Your RcvWindow limits you to: 895.2 kbps (111.9 KBytes/s) @ 200ms
    Your RcvWindow limits you to: 358.08 kbps (44.76 KBytes/s) @ 500ms

    MTU Discovery (RFC1191) = ON

    Time to live left = 50 hops
    TTL value is ok.

    Timestamps (RFC1323) = OFF

    Selective Acknowledgements (RFC2018) = ON

    IP type of service field (RFC1349)= 00000000
    Eh, kinda new to SpeedGuide.net... These aren't SpeedGuide.net's tweaks though, these were recommendations from DSLReports. Any recommendations on what to do to tweak my connection?

    EDIT: Oh yeah, my connection is a DSL PPPoe connection, so yeah, that's why I put the MTU at 1492, I'm not on cable.

    [ 05-21-2001: Message edited by: bLiNd PyRo ]

  2. #2
    Lobo
    Guest

    Post

    Follow directions on help page below in sig, there is a patch for PPPoE, take your tine

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •