Results 1 to 7 of 7

Thread: ALL FOLDERS IMPORTANT!!

  1. #1
    R.I.P. 2013-11-22 blebs's Avatar
    Join Date
    Dec 2000
    Location
    North Canton, Ohio
    Posts
    12,819

    Post

    Finished Work Unit: Sending results
    - Reading upto 100 8-byte entries from "project.bed": Read 100 successfully
    - Reading upto 2 8-byte entries from "project.evd": Read 2 successfully
    - Connecting to server (IP = 171.64.122.94)
    - Sent Result Block: start 0000, end 0001

    Version1.33b console!
    Success is a lousy teacher. It seduces people into thinking they can't lose. -Bill Gates

  2. #2
    R.I.P. 2013-11-22 blebs's Avatar
    Join Date
    Dec 2000
    Location
    North Canton, Ohio
    Posts
    12,819

    Post

    Should be a total of 4 corrected villin units to that server. Some had errors and were redone before they landed on the server.I did get credited for 1. There are 3 missing now. All I've been getting since the server came back up is Villins!
    As far as I remember, they have all gone to .94. I just checked the F@H board and now 2 have been credited I should be at 53 units and one pending.

    [ 02-12-2001: Message edited by: blebs99 ]

    [ 02-12-2001: Message edited by: blebs99 ]
    Success is a lousy teacher. It seduces people into thinking they can't lose. -Bill Gates

  3. #3
    New Member
    Join Date
    Feb 2001
    Location
    SoCal
    Posts
    28

    Post

    Folding@Home Client Version 1.33b

    Finished Work Unit: Sending results
    - Reading upto 100 8-byte entries from "project.bed": Read 67 successfully
    - Reading upto 2 8-byte entries from "project.evd": Read 2 successfully
    - 67 Energy Values produced, ideally expected 100
    - Connecting to server (IP = 171.64.122.93)

    TINKER is Exiting following Normal Termination

    Finished Work Unit: Sending results
    - Reading upto 100 8-byte entries from "project.bed": Read 100 successfully
    - Reading upto 2 8-byte entries from "project.evd": Read 2 successfully
    - Connecting to server (IP = 171.64.122.94)

    I had one .94 and two .93

  4. #4
    DIDS
    Guest

    Post

    Folding@Home Client Version 1.33b

    Finished a frame (95)
    Finished a frame (96)
    Finished a frame (97)
    Finished a frame (98)
    Finished a frame (99)
    Finished a frame (100)
    TINKER is Exiting following Normal Termination

    Finished Work Unit: Sending results
    - Reading upto 100 8-byte entries from "project.bed": Read 100 successfully
    - Reading upto 2 8-byte entries from "project.evd": Read 2 successfully
    - Connecting to server (IP = 171.64.122.93)
    - Sent Result Block: start 0000, end 0001


    Deleting files: 'project.{arc,dyn,xyz,key,bed,evd}' and 'work.dat'...done.

    Getting work
    - Connecting to assignment server (IP = 171.64.122.87)
    - Requesting work server address
    - Connecting to server (IP = 171.64.122.93)
    - Connection established
    - Requesting work: Received
    - Closing connections
    - Writing checkpoint file

    Protein: villin
    - Frames Completed: 0, Remaining: 100
    - Dynamic steps required: 50000

  5. #5
    Banned gmcd33's Avatar
    Join Date
    Nov 2000
    Location
    Hillsdale. NJ 07642
    Posts
    2,220

    Post

    Finished a frame (100)
    TINKER is Exiting following Normal Termination

    Finished Work Unit: Sending results
    - Reading upto 100 8-byte entries from "project.bed": Read 77 successfully
    - Reading upto 2 8-byte entries from "project.evd": Read 2 successfully
    - 77 Energy Values produced, ideally expected 100
    - Connecting to server (IP = 171.64.122.90)
    - Sent Result Block: start 0000, end 0001


    Deleting files: 'project.{arc,dyn,xyz,key,bed,evd}' and 'work.dat'...done.

    Getting work
    - Connecting to assignment server (IP = 171.64.122.87)
    - Requesting work server address
    - Connecting to server (IP = 171.64.122.90)
    - Connection established
    - Requesting work: Received
    - Closing connections
    - Writing checkpoint file

    Protein: villin
    - Frames Completed: 0, Remaining: 100
    - Dynamic steps required: 50000

    Writing local files:
    - Writing "project.key": successful.
    - Writing "project.xyz": successful.

    PROJECT="project", NSTEPS=50000, DT=2.00, DTDUMP=1.00, TEMP=300.00
    TINKER: Software Tools for Molecular Design
    Version 3.8 October 2000
    Copyright (c) Jay William Ponder 1990-2000
    Finished a frame (1)

  6. #6
    Regular Member
    Join Date
    Dec 2000
    Location
    OKC Oklahoma
    Posts
    257

    Post

    Finished Work Unit: Sending results
    - Reading upto 100 8-byte entries from "project.bed": Read 80 successfully
    - Reading upto 2 8-byte entries from "project.evd": Read 2 successfully
    - 80 Energy Values produced, ideally expected 100
    - Connecting to server (IP = 171.64.122.91)
    - Sent Result Block: start 0000, end 0001

    TINKER is Exiting following Normal Termination

    Finished Work Unit: Sending results
    - Reading upto 100 8-byte entries from "project.bed": Read 100 successfully
    - Reading upto 2 8-byte entries from "project.evd": Read 2 successfully
    - Connecting to server (IP = 171.64.122.94)
    - Sent Result Block: start 0000, end 0001
    2 down 2 failures

    [ 02-13-2001: Message edited by: -Knine- ]
    http://k-9.tierranet.com/fold.gif
    It's Because Light Travels Faster Then Sound That Some People Appear Bright Until They Speak

  7. #7
    Regular Member Scoot's Avatar
    Join Date
    Oct 2000
    Location
    Spokane WA. USA
    Posts
    449

    Red face

    Folding@Home Client Version 1.33b
    inished a frame (98)
    Finished a frame (99)
    Finished a frame (100)
    TINKER is Exiting following Normal Termination

    Finished Work Unit: Sending results
    - Reading upto 100 8-byte entries from "project.bed": Read 60 successfully
    - Reading upto 2 8-byte entries from "project.evd": Read 2 successfully
    - 60 Energy Values produced, ideally expected 100
    - Connecting to server (IP = 171.64.122.93)
    - Sent Result Block: start 0000, end 0001

    Damn,
    villin

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •