Results 1 to 7 of 7

Thread: OK- what did I screw up?!?

  1. #1
    SG Enthusiast twwabw's Avatar
    Join Date
    Nov 2000
    Location
    LeRoy, NY, USA
    Posts
    2,472

    Post OK- what did I screw up?!?

    Just popped 3 PC's onto folding@home- in configuration chose twwabw (Speedguide.net Team)

    Ran console version on all 3, did 100 frames on each, but I see no results creditted. Did I do something wrong?

    This is on all 3 PC's scrlog.txt file-
    Finished Work Unit: Sending results
    - Reading upto 100 8-byte entries from "project.bed": Read 100 successfully
    - Reading upto 2 8-byte entries from "project.evd": Read 2 successfully
    - Connecting to server (IP = 171.64.122.90)
    - Sent Result Block: start 0000, end 0001
    Observe everything...focus on nothing..

  2. #2
    Broke
    Join Date
    Jan 2001
    Location
    Northern AB, CA
    Posts
    13,506

    Post

    give it a couple of hours if you havnt to show the post, after they said they sent, did theyy start counting again?
    Sometimes it takes a few tries to get the server to upload the completed work, and then download a new job.
    Let us know how your makin out, and we will help you get it straightened out as fast as possible
    Chris
    Seeing it start the next job is the only way i'm certain that it sent the finished on in

    [ 02-20-2001: Message edited by: Martiangod ]

  3. #3
    SG Enthusiast twwabw's Avatar
    Join Date
    Nov 2000
    Location
    LeRoy, NY, USA
    Posts
    2,472

    Post

    Yes- on each machine it started the next job. I'll check it later.

    Thanks

    Tim

  4. #4
    SG Enthusiast twwabw's Avatar
    Join Date
    Nov 2000
    Location
    LeRoy, NY, USA
    Posts
    2,472

    Post

    Is something wrong with my setup, or in general? I've crunched a bunch of units, and still no results on the status page.

    In fact, no updates at all since last night, except for a burst at 10 am.

    What's up?

  5. #5
    Banned gmcd33's Avatar
    Join Date
    Nov 2000
    Location
    Hillsdale. NJ 07642
    Posts
    2,220

    Post

    I dont know what to tell you. I am STILL only averaging 1 sometimes 2 WU's an hour with the following setup

    Athlon 950 MHz Console
    P3 866 MHz Console
    P3 700 MHz Screen Saver
    P3 450 MHz Console
    P3 450 MHz Console
    P1 233 Mhz Console

    These comps have clean installs of version 1.34 and I have verified the proper user name on all machines. Each machine gets re-booted every few days to keep things fresh. Everytime I see the machines, they are all folding away-never just idleing or waiting for work.

    I just dont get it?

    I suppose if there is a problem it will get fixed and the WU's will be credited. Even if they arent, we are still helping to fight cancer and such.

    Oh and all I ger are Villins...

  6. #6
    Broke
    Join Date
    Jan 2001
    Location
    Northern AB, CA
    Posts
    13,506

    Post

    twwabw I'm wondering if you started in the last couple of days if something may have happened to your reg with Stanford when the servers went down.
    Another thing, what version of folding@home are you using???
    Hope its not 1.33, there is a problem with that one, 1.34 seems pretty good.
    Might want to uninstall from one machine, delete folder from programs folder, tehn reinstall and reregister, then see if you post with that machine, if you do then reinstall the other machines. But make sure your not using version 1.33

  7. #7
    SG Enthusiast twwabw's Avatar
    Join Date
    Nov 2000
    Location
    LeRoy, NY, USA
    Posts
    2,472

    Post

    Yep- it was 1.33. In fact, on my 2000 Server machine, since last night wouldn't even start app- would start up, then immediately disconnect and shut down. I'll hunt for the 1.34.

    Thanks!

    Tim
    Observe everything...focus on nothing..

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •