Results 1 to 4 of 4

Thread: online games are unplayable with vdsl2 is there a fix ?

  1. #1
    Junior Member
    Join Date
    Jun 2022
    Posts
    2

    online games are unplayable with vdsl2 is there a fix ?

    hello guys ,

    I'm trying to optimize dsl connection with these commands
    Code:
    usage: wan adsl sethp [opt]
    usage: wan ghs set toneselect <1=t9+t37/ 2=t17+t45/ 3=t25+t53/ 4=1+2/ 5=2+3/ 6=1+3/ 0=1+2+3>
    usage: wan ghs set usifft <us_ifft_size>  <us_ifft_fill_type,1=complex conjurate/2=fill zero>
    usage: wan ghs set nearvendorid <value>
    usage: wan ghs set sendcxntghs   <on/off?>  <on/off ?>
    usage: wan dmt2 nm cofw [std|nonstd]
    usage: wan dmt2 set fakebg [on|off]
    usage: wan dmt2 nm cnxt [1|0]
    usage: wan dmt2 db tlb [tlb ID]
    usage: wan dmt2 db set [off/auto/db_index]
    usage: wan dmt2 set ginp_test [on|off]
    usage: wan dmt2 set fltrvref [value]
    usage: wan dmt2 set largeD 0/1/2
    usage: wan dmt2 set SRACrc [0/1 OFF/ON]
    usage: wan dmt2 set esrelink on/off [threshold]
    usage: wan dmt2 set medley threshold [snr threshold] [tone ratio]
    usage: wan dmt2 set pilotretrain [0/1/2/3]
    usage: wan dmt2 set pilotdata [on|off]
    usage: wan dmt2 set linkstate [0|3]
    usage: wan dmt2 set attenoffset [value]
    usage: wan dmt2 set crcrelink [value]
    usage: wan dmt2 set snrmoffset [Intl*512] [Fast*512]
    usage: wan dmt2 set depth [value]
    usage: wan dmt2 set Rs off/on/[Max R_value]
    usage: wan dmt2 set blackout [start_tone>31] [end_tone<512]
    usage: wan dmt2 set pilot [tone]
    usage: wan dmt2 set path 0/1/2(Fast/Inter/Free) path
    usage: wan dmt2 set Slowerbound [value]
    usage: wan dmt2 set inp [INP value *100]
    usage: wan dmt2 set pcb [dspcb] [uspcb]
    usage: wan dmt2 set updatesync [on|off]
    usage: wan dmt2 set sync [on|off] [sync position] [txrxsample] [0~2047]
    usage: wan dmt2 set rxfiltertype <value>
    usage: wan dmt2 set txfiltertype <value>
    usage: wan dmt2 set rxfltrgain [value]
    usage: wan dmt2 set txfltrgain [value]
    usage: wan dmt2 set fdm_cfg mode[0|1|2|3] type[1|2]
    usage: wan dmt2 set tcm [on|off]
    usage: wan dmt set teqvref <value>
    usage: wan dmt set dbgflag [value]
    usage: wan dmt set  softdecode <on/off>
    usage: wan dmt set bngrelinkflag <0/1>
    usage: wan dmt set agcvref <value1> <value2> <value3>
    usage: wan dmt set syncflag <on/off>
    usage: wan dmt set up32relinkflag <0/1>
    usage: wan dmt set attenoffset <vaule>
    usage: wan dmt set  medleytone <start tone> <stop tone>
    usage: wan dmt set snrmoffset <value[(+/-)db*512]>
    usage: wan dmt set snroffset <value[(+/-)db*512]>
    usage: wan dmt set pilotdata t64_value t_pilot_value
    usage: wan dmt set pilottone <value>
    usage: wan dmt set minsnrm <value>
    usage: wan dmt set txfiltertype <value>
    usage: wan dmt set db rxfiltertype <value>
    usage: wan dmt set txfiltgain <value>
    usage: wan dmt set teqtones <start tone> <end tone>
    usage: wan dmt set txrvbtones <start tone> <end tone>
    usage: wan dmt set  fm <value>
    usage: wan dmt set tcm [on|off]
    usage:wan dmt aoc gwtst [value]
    usage:wan dmt aoc bwtst [value]
    usage: wan dmt aoc bitswap [on/off] [on/off]
    usage: wan dmt pilot [cnt] [pause opt]
    usage:wan dmt db tlb [value]
    usage: wan dmt db set  [off/auto/db_index]
    usage: wan vdsl2 show online_snrm
    usage: wan vdsl2 set olr_timing [timing][sos_x][sos_y][sos_z]
    usage: wan vdsl2 show st_avg_snrm (tx/rx)
    usage: wan vdsl2 show errpwr [init|st]
    usage: wan vdsl2 set ginp_sra [on/off/go]
    usage: wan vdsl2 set ginp_sos [go/off]
    usage: wan vdsl2 test ovhd [diag|inv|pm|mgcnt|clreoc|nsf|pmd]
    usage: wan vdsl2 show vector
    usage: wan vdsl2 show st_soc_info
    usage: wan vdsl2 show pms_pmd [tx|rx]
    usage: wan vdsl2 show pmdtestparam (hlog/qln/snr/attndr)
    usage: wan vdsl2 show snrm [st]
    usage: wan vdsl2 show snr [init|st]
    usage: wan vdsl2 show new_bgtbl rx
    usage: wan vdsl2 show bgtbl [tx|rx]
    usage: wan vdsl2 set gsd [value]
    usage: wan vdsl2 set gso [value]
    usage: wan vdsl2 set gvt_mode [value]
    usage: wan vdsl2 set hrt_delay [tx sym] [tx dtu] [rx sym] [rx dtu]
    usage: wan vdsl2 set sync_sym [val]
    usage: wan vdsl2 set ginp_test [on|off]
    usage: wan vdsl2 set tr115 [on|off]
    usage: wan vdsl2 set cd_us_band_adj [on|off|auto]
    usage: wan vdsl2 set ds_est_new [on|off]
    usage: wan vdsl2 set ds_est_new min [x] ,X = (0.1 * x) dB
    usage: wan vdsl2 set ds_est_new adsl [y], Y = (1/1000 * y)
    usage: wan vdsl2 set ds_est_new echo [z], Z = z dB(>=0)
    usage: wan vdsl2 set cd_us_comp_value [value]
    usage: wan vdsl2 set usbp_check [on|off]
    usage: wan vdsl2 set kikp [0~13][0~11]
    usage: wan vdsl2 set rtslog_from [rtslog_state_from]
    usage: wan vdsl2 set v_noise [on|off]
    usage: wan vdsl2 set tx_cp_len [val]
    usage: wan vdsl2 set tx_comp on/off
    usage: wan vdsl2 tx_comp tone start_tone relay_tone stop_tone
    usage: wan vdsl2 tx_comp value start_tone_psd_comp relay_tone_psd_comp stop_tone_psd_comp
    usage: wan vdsl2 tx_comp offsetrelay_tone_psd_comp_offset_non_upbo relay_tone_psd_comp_offset_upbo
    usage: wan vdsl2 set txgain_deploy [0|1|2]
    usage: wan vdsl2 set txpsd_drop_check [on|off]
    usage: wan vdsl2 set txpsd_drop_limit [val]
    usage: wan vdsl2 set txpwr_diff [val]
    usage: wan vdsl2 set txpwr_limit [on/off] [value/none]
    usage: wan vdsl2 set mode_select [on|off]
    usage: wan vdsl2 set rxpcb [on|off][rxpcb_mask]
    usage: wan vdsl2 set detect_tone_offset [detect_tone_offset]
    usage: wan vdsl2 set ds_tone [ds_lowest_tone] [ds_highest_tone]
    usage: wan vdsl2 set us_tone [us_lowest_tone] [us_highest_tone]
    usage: wan vdsl2 set tx_pcb [on|off] [pcb_mask]
    usage: wan vdsl2 set rfi_cancel [on|off]
    usage: wan vdsl2 set rx_win [on/off]
    usage: wan vdsl2 set tx_win [on/off][win_len]
    usage: wan vdsl2 set rxfltr_gain [val]
    usage: wan vdsl2 set rxfltr_ref [val]
    usage: wan vdsl2 set ta_offset [val]
    usage: wan vdsl2 set byte_med[R_MED 1|2][O_MED 1|2]
    usage: wan vdsl2 set kl0 [val:0~1280]
    usage: wan vdsl2 set kl0_offset [val]
    usage: wan vdsl2 set kl0_method [0|1]
    usage: wan vdsl2 set upbo [on|off]
    usage: wan vdsl2 set rx_blackout 0 : ds blackout off
    usage: wan vdsl2 set teq_fir_coeff [a2] [a3] [a4]
    usage: wan vdsl2 set rx_fltr_type [fltr_for_cd_phase] [fltr_for_training_phase]
    usage: wan vdsl2 set tx_fltr_type [fltr_for_cd_phase] [fltr_for_training_phase]
    usage: wan vdsl2 set tx_fltr_gain [tx_fltr_gain] [tx_fltr_dout_scale] [tx_upshift_bit]
    usage: wan vdsl2 set tx_gain_offset [value]
    usage: wan vdsl2 set st_period [period(sec)]
    usage: wan vdsl2 set st_task [on/off]
    usage: wan vdsl2 set st_dbg [on/off/olr]
    usage: wan vdsl2 set tpstc_type [0(ptm only)/1(ptm+atm)]
    usage: wan vdsl2 set gvector [1|2]
    usage: wan vdsl2 set amd [0|1|2|3]
    usage: wan vdsl2 set sync_check [on/off]
    usage: wan vdsl2 set one_bit [on|off]
    usage: wan vdsl2 set st_target_snrm [snrm]
    usage: wan vdsl2 set target_snrm [snrm_dB]
    usage: wan vdsl2 set manual_pms [on|off]
    usage: wan vdsl2 set inp_snrm_roc [inp_min(symbol)] [snrm_offset(dB)]
    usage: wan vdsl2 set roc [on/off]
    usage: wan vdsl2 set dual_lp [on|off]
    usage: wan vdsl2 set fake_pms [on|off]
    usage: wan vdsl2 set search_time_pms [time (# symbols)]
    usage: wan vdsl2 set rscg_pms [on|off]
    usage: wan vdsl2 set largedelay_pms [on|off]
    usage: wan vdsl2 set inpdelay_pms [inp_min0] [inp_min1] [delay_max0] [delay_max1]
    usage: wan vdsl2 set ndr_pms [msg_min] [ndr_min0] [ndr_min1] [ndr_max0] [ndr_max1]
    usage: wan vdsl2 set ins_inp [on/off]
    usage: wan vdsl2 set sos [on/off/go]
    usage: wan vdsl2 set sra_trans_method [0(non-seg)/1(seg)]
    usage: wan vdsl2 set sra_l_target off/[bits]
    usage: wan vdsl2 set sra_step [on|off]
    usage: wan vdsl2 set sra [on|off]
    usage: wan vdsl2 set bs_param [snrm] [trigger] [scan_tone_num] [wait_cnt] [scan_start_idx] [scan_end_idx]
    usage: wan vdsl2 set bs_1bit_change [on|off]
    usage: wan vdsl2 set autobs [on|off]
    usage: wan vdsl2 set bs_tx [on|off]
    usage: wan vdsl2 set bs [on|off]
    usage: wan vdsl2 set mgcnt_ovhd_test [on|off]
    usage: wan vdsl2 set agc_vref [val1] [val2] [val3] [val4]
    usage: wan vdsl2 set tcm [on|off]
    usage: wan hwdmt afe set txfc <value>
    usage: wan hwdmt afe set vld <BIAS> <CPP> <CPN>
    usage: wan hwdmt afe set vld <REG> <DATA>
    usage: wan hwdmt afe set ldv_gain <value: 0/6/12
    usage: wan hwdmt afe set rxlpf 0(Bypass)/1(8M)/2(4M)/3(2M)
    usage: wan hwdmt afe set rxlpf 0(27M)/1(17M)/2(8.5M)
    usage: wan hwdmt afe set rxgain  1(ADSL Mode)  <eclna_atten> <eclna_gain> <lnhpf_gain> <aaf_gain> <sf_onoff> <hpf bypass>
    usage: wan hwdmt afe set rxgain  2(VDSL Mode)  <lna_atten> <lna_gain> <aaf_atten> <aaf_gain>
    usage: wan hwdmt afe set rxgain  value(value not 1 and 2 means cancel rxgain setting) !
    usage: wan hwdmt afe set txgain <value: 0~7>. Correspond value[-12 -6 -2 -1 0 1 2 3]
    usage: wan hwdmt afe set iampgain <value N(0~4) G1(1~4) G2(1~6) G3(1~6)>
    usage: wan hwdmt afe set iampgain N <value 0~4>)
    usage: wan hwdmt afe set iampgain G1 <value 1~4>)
    usage: wan hwdmt afe set iampgain G2 <value 1~6>)
    usage: wan hwdmt afe set iampgain G3 <value 1~6>)
    isso@DEll-OptiPlex-780:~$ strings tc3162_dmt_mt7510.ko  | fgrep  wan   |fgrep  usage | fgrep set
    usage: wan adsl sethp [opt]
    usage: wan ghs set toneselect <1=t9+t37/ 2=t17+t45/ 3=t25+t53/ 4=1+2/ 5=2+3/ 6=1+3/ 0=1+2+3>
    usage: wan ghs set usifft <us_ifft_size>  <us_ifft_fill_type,1=complex conjurate/2=fill zero>
    usage: wan ghs set nearvendorid <value>
    usage: wan ghs set sendcxntghs   <on/off?>  <on/off ?>
    usage: wan dmt2 set fakebg [on|off]
    usage: wan dmt2 db set [off/auto/db_index]
    usage: wan dmt2 set ginp_test [on|off]
    usage: wan dmt2 set fltrvref [value]
    usage: wan dmt2 set largeD 0/1/2
    usage: wan dmt2 set SRACrc [0/1 OFF/ON]
    usage: wan dmt2 set esrelink on/off [threshold]
    usage: wan dmt2 set medley threshold [snr threshold] [tone ratio]
    usage: wan dmt2 set pilotretrain [0/1/2/3]
    usage: wan dmt2 set pilotdata [on|off]
    usage: wan dmt2 set linkstate [0|3]
    usage: wan dmt2 set attenoffset [value]
    usage: wan dmt2 set crcrelink [value]
    usage: wan dmt2 set snrmoffset [Intl*512] [Fast*512]
    usage: wan dmt2 set depth [value]
    usage: wan dmt2 set Rs off/on/[Max R_value]
    usage: wan dmt2 set blackout [start_tone>31] [end_tone<512]
    usage: wan dmt2 set pilot [tone]
    usage: wan dmt2 set path 0/1/2(Fast/Inter/Free) path
    usage: wan dmt2 set Slowerbound [value]
    usage: wan dmt2 set inp [INP value *100]
    usage: wan dmt2 set pcb [dspcb] [uspcb]
    usage: wan dmt2 set updatesync [on|off]
    usage: wan dmt2 set sync [on|off] [sync position] [txrxsample] [0~2047]
    usage: wan dmt2 set rxfiltertype <value>
    usage: wan dmt2 set txfiltertype <value>
    usage: wan dmt2 set rxfltrgain [value]
    usage: wan dmt2 set txfltrgain [value]
    usage: wan dmt2 set fdm_cfg mode[0|1|2|3] type[1|2]
    usage: wan dmt2 set tcm [on|off]
    usage: wan dmt set teqvref <value>
    usage: wan dmt set dbgflag [value]
    usage: wan dmt set  softdecode <on/off>
    usage: wan dmt set bngrelinkflag <0/1>
    usage: wan dmt set agcvref <value1> <value2> <value3>
    usage: wan dmt set syncflag <on/off>
    usage: wan dmt set up32relinkflag <0/1>
    usage: wan dmt set attenoffset <vaule>
    usage: wan dmt set  medleytone <start tone> <stop tone>
    usage: wan dmt set snrmoffset <value[(+/-)db*512]>
    usage: wan dmt set snroffset <value[(+/-)db*512]>
    usage: wan dmt set pilotdata t64_value t_pilot_value
    usage: wan dmt set pilottone <value>
    usage: wan dmt set minsnrm <value>
    usage: wan dmt set txfiltertype <value>
    usage: wan dmt set db rxfiltertype <value>
    usage: wan dmt set txfiltgain <value>
    usage: wan dmt set teqtones <start tone> <end tone>
    usage: wan dmt set txrvbtones <start tone> <end tone>
    usage: wan dmt set  fm <value>
    usage: wan dmt set tcm [on|off]
    usage: wan dmt db set  [off/auto/db_index]
    usage: wan vdsl2 set olr_timing [timing][sos_x][sos_y][sos_z]
    usage: wan vdsl2 set ginp_sra [on/off/go]
    usage: wan vdsl2 set ginp_sos [go/off]
    usage: wan vdsl2 set gsd [value]
    usage: wan vdsl2 set gso [value]
    usage: wan vdsl2 set gvt_mode [value]
    usage: wan vdsl2 set hrt_delay [tx sym] [tx dtu] [rx sym] [rx dtu]
    usage: wan vdsl2 set sync_sym [val]
    usage: wan vdsl2 set ginp_test [on|off]
    usage: wan vdsl2 set tr115 [on|off]
    usage: wan vdsl2 set cd_us_band_adj [on|off|auto]
    usage: wan vdsl2 set ds_est_new [on|off]
    usage: wan vdsl2 set ds_est_new min [x] ,X = (0.1 * x) dB
    usage: wan vdsl2 set ds_est_new adsl [y], Y = (1/1000 * y)
    usage: wan vdsl2 set ds_est_new echo [z], Z = z dB(>=0)
    usage: wan vdsl2 set cd_us_comp_value [value]
    usage: wan vdsl2 set usbp_check [on|off]
    usage: wan vdsl2 set kikp [0~13][0~11]
    usage: wan vdsl2 set rtslog_from [rtslog_state_from]
    usage: wan vdsl2 set v_noise [on|off]
    usage: wan vdsl2 set tx_cp_len [val]
    usage: wan vdsl2 set tx_comp on/off
    usage: wan vdsl2 tx_comp offsetrelay_tone_psd_comp_offset_non_upbo relay_tone_psd_comp_offset_upbo
    usage: wan vdsl2 set txgain_deploy [0|1|2]
    usage: wan vdsl2 set txpsd_drop_check [on|off]
    usage: wan vdsl2 set txpsd_drop_limit [val]
    usage: wan vdsl2 set txpwr_diff [val]
    usage: wan vdsl2 set txpwr_limit [on/off] [value/none]
    usage: wan vdsl2 set mode_select [on|off]
    usage: wan vdsl2 set rxpcb [on|off][rxpcb_mask]
    usage: wan vdsl2 set detect_tone_offset [detect_tone_offset]
    usage: wan vdsl2 set ds_tone [ds_lowest_tone] [ds_highest_tone]
    usage: wan vdsl2 set us_tone [us_lowest_tone] [us_highest_tone]
    usage: wan vdsl2 set tx_pcb [on|off] [pcb_mask]
    usage: wan vdsl2 set rfi_cancel [on|off]
    usage: wan vdsl2 set rx_win [on/off]
    usage: wan vdsl2 set tx_win [on/off][win_len]
    usage: wan vdsl2 set rxfltr_gain [val]
    usage: wan vdsl2 set rxfltr_ref [val]
    usage: wan vdsl2 set ta_offset [val]
    usage: wan vdsl2 set byte_med[R_MED 1|2][O_MED 1|2]
    usage: wan vdsl2 set kl0 [val:0~1280]
    usage: wan vdsl2 set kl0_offset [val]
    usage: wan vdsl2 set kl0_method [0|1]
    usage: wan vdsl2 set upbo [on|off]
    usage: wan vdsl2 set rx_blackout 0 : ds blackout off
    usage: wan vdsl2 set teq_fir_coeff [a2] [a3] [a4]
    usage: wan vdsl2 set rx_fltr_type [fltr_for_cd_phase] [fltr_for_training_phase]
    usage: wan vdsl2 set tx_fltr_type [fltr_for_cd_phase] [fltr_for_training_phase]
    usage: wan vdsl2 set tx_fltr_gain [tx_fltr_gain] [tx_fltr_dout_scale] [tx_upshift_bit]
    usage: wan vdsl2 set tx_gain_offset [value]
    usage: wan vdsl2 set st_period [period(sec)]
    usage: wan vdsl2 set st_task [on/off]
    usage: wan vdsl2 set st_dbg [on/off/olr]
    usage: wan vdsl2 set tpstc_type [0(ptm only)/1(ptm+atm)]
    usage: wan vdsl2 set gvector [1|2]
    usage: wan vdsl2 set amd [0|1|2|3]
    usage: wan vdsl2 set sync_check [on/off]
    usage: wan vdsl2 set one_bit [on|off]
    usage: wan vdsl2 set st_target_snrm [snrm]
    usage: wan vdsl2 set target_snrm [snrm_dB]
    usage: wan vdsl2 set manual_pms [on|off]
    usage: wan vdsl2 set inp_snrm_roc [inp_min(symbol)] [snrm_offset(dB)]
    usage: wan vdsl2 set roc [on/off]
    usage: wan vdsl2 set dual_lp [on|off]
    usage: wan vdsl2 set fake_pms [on|off]
    usage: wan vdsl2 set search_time_pms [time (# symbols)]
    usage: wan vdsl2 set rscg_pms [on|off]
    usage: wan vdsl2 set largedelay_pms [on|off]
    usage: wan vdsl2 set inpdelay_pms [inp_min0] [inp_min1] [delay_max0] [delay_max1]
    usage: wan vdsl2 set ndr_pms [msg_min] [ndr_min0] [ndr_min1] [ndr_max0] [ndr_max1]
    usage: wan vdsl2 set ins_inp [on/off]
    usage: wan vdsl2 set sos [on/off/go]
    usage: wan vdsl2 set sra_trans_method [0(non-seg)/1(seg)]
    usage: wan vdsl2 set sra_l_target off/[bits]
    usage: wan vdsl2 set sra_step [on|off]
    usage: wan vdsl2 set sra [on|off]
    usage: wan vdsl2 set bs_param [snrm] [trigger] [scan_tone_num] [wait_cnt] [scan_start_idx] [scan_end_idx]
    usage: wan vdsl2 set bs_1bit_change [on|off]
    usage: wan vdsl2 set autobs [on|off]
    usage: wan vdsl2 set bs_tx [on|off]
    usage: wan vdsl2 set bs [on|off]
    usage: wan vdsl2 set mgcnt_ovhd_test [on|off]
    usage: wan vdsl2 set agc_vref [val1] [val2] [val3] [val4]
    usage: wan vdsl2 set tcm [on|off]
    usage: wan hwdmt afe set txfc <value>
    usage: wan hwdmt afe set vld <BIAS> <CPP> <CPN>
    usage: wan hwdmt afe set vld <REG> <DATA>
    usage: wan hwdmt afe set ldv_gain <value: 0/6/12
    usage: wan hwdmt afe set rxlpf 0(Bypass)/1(8M)/2(4M)/3(2M)
    usage: wan hwdmt afe set rxlpf 0(27M)/1(17M)/2(8.5M)
    usage: wan hwdmt afe set rxgain  1(ADSL Mode)  <eclna_atten> <eclna_gain> <lnhpf_gain> <aaf_gain> <sf_onoff> <hpf bypass>
    usage: wan hwdmt afe set rxgain  2(VDSL Mode)  <lna_atten> <lna_gain> <aaf_atten> <aaf_gain>
    usage: wan hwdmt afe set rxgain  value(value not 1 and 2 means cancel rxgain setting) !
    usage: wan hwdmt afe set txgain <value: 0~7>. Correspond value[-12 -6 -2 -1 0 1 2 3]
    usage: wan hwdmt afe set iampgain <value N(0~4) G1(1~4) G2(1~6) G3(1~6)>
    usage: wan hwdmt afe set iampgain N <value 0~4>)
    usage: wan hwdmt afe set iampgain G1 <value 1~4>)
    usage: wan hwdmt afe set iampgain G2 <value 1~6>)
    usage: wan hwdmt afe set iampgain G3 <value 1~6>)
    i notice my line attenation reduced from 6 to 1.7 with this command
    Code:
    wan vdsl2 set cd_us_comp_value

  2. #2
    Administrator Philip's Avatar
    Join Date
    May 1999
    Location
    Jacksonville, Florida
    Posts
    11,335
    Blog Entries
    6
    it depends on what your current line conditions are..

    What do you mean unplayable?
    I would try to pull some info from the DSL modem, like line attenuation, SNR levels, etc. so you know what to change, if anything.
    Linux is user friendly, it's just picky about its friends...
    Disclaimer: Please use caution when opening messages, my grasp on reality may have shaken loose during transmission (going on rusty memory circuits). I also eat whatever crayons are put in front of me.
    ๑۩۞۩๑

  3. #3
    Junior Member
    Join Date
    Jun 2022
    Posts
    2
    i have huge packet loss do yout know how to fix it with these commands

  4. #4
    Administrator Philip's Avatar
    Join Date
    May 1999
    Location
    Jacksonville, Florida
    Posts
    11,335
    Blog Entries
    6
    Before applying any settings, it's useful to know what your signal levels are.. If your line, or signal is bad, settings are not really going to fix the packet loss.


    You can try to get the modem info:
    show wan vdsl2 chandata
    show wan vdsl2 linedata near


    You can try to set increase the SNR margin for fewer disconnects, and somewhat slower, more stable speed (negative numbers reduce speed, increase stability):

    wan vdsl2 set target_snrm -3072 -3072
    wan adsl reset

    You should give it a minute or two and check signal levels again after that. If modem fails to resync, try with a larger noise margin (bigger negative value, at least 3dB is needed, 6db or 9db is more common). Defaults snrm is isually - -


    You may have to create a file "autoexec.net" that contains the commands and is executed after reboot, but this depends on your modem. You do that with: sys edit autoexec.net
    Linux is user friendly, it's just picky about its friends...
    Disclaimer: Please use caution when opening messages, my grasp on reality may have shaken loose during transmission (going on rusty memory circuits). I also eat whatever crayons are put in front of me.
    ๑۩۞۩๑

Similar Threads

  1. vdsl2 optimize settings
    By codetr in forum Broadband Tweaks Help
    Replies: 2
    Last Post: 06-24-15, 04:33 AM
  2. RTO during Online Games
    By dexter123xxx in forum General Broadband Forum
    Replies: 0
    Last Post: 10-24-10, 01:52 AM
  3. Garbled sounds, music and movies unplayable...
    By drdoug99 in forum Hardware & Overclocking
    Replies: 6
    Last Post: 06-14-06, 08:43 PM
  4. Replies: 19
    Last Post: 12-01-02, 03:39 PM
  5. scar craft 1 unplayable
    By YARDofSTUF in forum General Discussion Board
    Replies: 12
    Last Post: 07-04-02, 07:04 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •