Results 1 to 2 of 2

Thread: AC 1200 DB Wi-Fi Dual-Band ?

  1. #1
    Junior Member
    Join Date
    Sep 2005

    AC 1200 DB Wi-Fi Dual-Band ?

    I have a belkin AC 1200 DB Wi-Fi Dual-Band AC+ Gigabit Router model f9k1123v1. This morning my wi-fi stopped working and I can not access the admin page for my router I keep getting page can not be reached or the page isnít working.My os is win7 and internet is hughesnet...

  2. #2
    Administrator Philip's Avatar
    Join Date
    May 1999
    Jacksonville, Florida, United States
    Blog Entries
    Does internet work ? What do the LEDs on the device indicate, is it on/online ? Have you tried restarting the router ?

    It is possible sometimes for a router to get reset and change its IP address to the default, however, I believe that is your router's default IP. Fore Belkin routers, you may also want to try: http://router/
    I would connect to it via a Cat5 cable, and see what it's IP is. You can achieve that by leaving your PC to obtain IP automatically, but drop to command prompt and type: ipconfig [ENTER]
    Look for the "Default Gateway" line, that should be the IP of your router, or whatever device you're connected to.

Similar Threads

  1. Thompson TG782T vs Netgear N600 Dual band modem?
    By Adam McKinstry in forum General Broadband Forum
    Replies: 0
    Last Post: 02-16-12, 02:40 AM
  2. Wireless N Router with Dual Band question
    By timbowman1 in forum Wireless Networks & Routers
    Replies: 3
    Last Post: 02-05-10, 07:06 AM
  3. Replies: 5
    Last Post: 01-23-10, 05:49 AM
  4. Wireless N Router with dual band question
    By timbowman1 in forum Networking Forum
    Replies: 0
    Last Post: 12-13-09, 10:58 PM
  5. XP SP3: Simultaneous dual-band wireless connection supported?
    By Mark in forum
    Replies: 4
    Last Post: 08-11-09, 09:09 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts