Results 1 to 5 of 5

Thread: Need Help ? Please Read First

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Administrator Philip's Avatar
    Join Date
    May 1999
    Location
    Jacksonville, Florida, United States
    Posts
    10,288
    Blog Entries
    6

    Exclamation Need Help ? Please Read First

    It may be a good idea to run a speed test both before and after tweaking!
    Most basic tweaks are covered by using our broadband tweaking tool, the SG TCP Optimizer (simply choose your maximum advertised internet speed and apply the optimal settings).

    PLEASE TRY TO ANSWER THESE QUESTIONS IF YOU NEED HELP

    The answers to the following questions are important when asking for assistance in tweaking your connection, you must help us help you!
    The more information you provide, the more informed decisions we can make to help.

    1. What is your advertised internet speed ? i.e. 12Mbps/768kbps (12 Megabits/second downstream, 768 kilobits/second upstream)
    2. What actual transfer speed do you get? (you can try a speed test from speedguide.net or speedtest.net)
    3. Who is your Internet Provider (ISP), and what type of connection do you have ? i.e. Comcast Cable, AT&T PPPoE DSL, ISDN, 56K, etc.
    4. What are your current settings ? do a TCP/IP Analyzer test and copy/paste the results in your post.
    5. Your modem/router/ap brand ? (i.e. Motorola SB6100 cable modem, Linksys WRT54GS Wi-Fi router, etc.)
    6. Your Operating System ? (i.e. XP,Vista 64bit,Windows 7, etc.)

    You can also provide additional information to help us understand your issues, i.e. latency, gaming, transfer speed, browsing problems, etc. Please start your own thread.



    Additional Notes

    Your goal should be to get to ~90% of your advertised speed. The rest may depend on factors beyond your control, such as protocol overhead, routers, servers, line quality, congested nodes, etc. Tweaking only optimizes your end of the connection, and even though it is usually the bottleneck, your connection is still dependent on the quality of the feed that your ISP provides.

    Separate your Cable/DSL modem and router/access point - don't stack them! Many devices are not adequately shielded and very succeptible to EMI (electromagnetic interference) so they should be placed at least 1-2 feet apart from each other and other possible sources of EMI (power supplies, fluorescent lighting, cordless phones, etc.)

    MTU value should be set properly first, before other tweaking: 56K/PPPoA DSL/Cable Modem - 1500, PPPoE DSL - 1492 or 1480

    Connect your modem via ethernet (Network Interface Card) instead of USB, if possible. Ethernet is faster and much more stable. Using the latest drivers from your NIC's manufacturer can also help, they often have advanced settings that help further optimize the performance of your NIC.

    Minimize the number of protocols - in your NIc's properties (general tab), uninstall all protocols you do not need. Theoretically, you only need "Internet Protocol TCP/IP" version 4 for a stand-alone PC. You can disable NetBios over TCP/IP if you do not use file and printer sharing.


    TOOLS and links to optimize your connection

    TCP/IP Anlyzer - analyze your connection to our server.
    TCP Optimizer - use the optimal settings to cover most speed tweaks
    speedguide.net/speedtest - speed test
    speedtest.net - speed test
    SG Network Tools - traceroute from our server to you may help identify congested nodes and ping/latency issues.

  2. #2
    SpeedGuide.net TCP Analyzer Results
    Tested on: 2012.01.30 10:40
    IP address: 60.51.xx.xxx
    Client OS/browser: Windows 7 (Chrome 16.0.912.77)

    TCP options string: 020405ac01010402
    MSS: 1452
    MTU: 1492
    TCP Window: 64240 (NOT multiple of MSS)
    RWIN Scaling: 0 bits
    Unscaled RWIN : 64240
    Recommended RWINs: 63888, 127776, 255552, 511104, 1022208
    BDP limit (200ms): 2570kbps (321KBytes/s)
    BDP limit (500ms): 1028kbps (128KBytes/s)
    MTU Discovery: ON
    TTL: 116
    Timestamps: OFF
    SACKs: ON
    IP ToS: 00000000 (0)

  3. #3
    Junior Member
    Join Date
    Feb 2013
    Location
    General Santos City, Philippines
    Posts
    1
    1. What is your advertised internet speed ? 1Mbps
    2. What actual transfer speed do you get? 1291 kbps down (~1.29 Mbps, 158 KB/s) ↓ & 410 kbps up (~0.41 Mbps, 50 KB/s) ↑
    3. Who is your Internet Provider (ISP), and what type of connection do you have ? PLDT
    4. What are your current settings ?
    SpeedGuide.net TCP Analyzer Results
    Tested on: 2013.02.05 20:22
    IP address: 49.145.xx.xxx
    Client OS/browser: Windows 8 (Firefox 18.0)
    TCP options string: 020405a20103030201010402
    MSS: 1442
    MTU: 1482
    TCP Window: 66332 (multiple of MSS)
    RWIN Scaling: 2 bits (2^2=4)
    Unscaled RWIN : 16583
    Recommended RWINs: 63448, 126896, 253792, 507584, 1015168
    BDP limit (200ms): 2653kbps (332KBytes/s)
    BDP limit (500ms): 1061kbps (133KBytes/s)
    MTU Discovery: ON
    TTL: 108
    Timestamps: OFF
    SACKs: ON
    IP ToS: 00000000 (0)
    5. Your modem/router/ap brand ? ZyXel
    6. Your Operating System ? Windows 8

  4. #4
    SpeedGuide.net TCP Analyzer Results
    Tested on: 2016.03.07 22:29
    IP address: 4.31.xxx.xxx(proxy:66.249.88.165)
    Client OS/browser: Android (Chrome 48.0.2564.95)

    TCP options string: 020405960402080a013269250000000001030307
    MSS: 1430
    MTU: 1470
    TCP Window: 43008 (NOT multiple of MSS)
    RWIN Scaling: 7 bits (2^7=128)
    Unscaled RWIN : 336
    Recommended RWINs: 62920, 125840, 251680, 503360, 1006720
    BDP limit (200ms): 1720kbps (215KBytes/s)
    BDP limit (500ms): 688kbps (86KBytes/s)
    MTU Discovery: OFF
    TTL: 45
    Timestamps: ON
    SACKs: ON
    IP ToS: 00000000 (0)

  5. #5
    Junior Member
    Join Date
    Jun 2016
    Posts
    1
    SQL injection is simple technique to maliciously attack in web application that is use supplied data from client embedded as SQL statements. And attacker must be used access client database by using command line. SQL injection method different but they are all hacker used single vulnerability in the web application.
    There are available attack its maintain top 10 list of famous attack they are likely used hacker. This type attack as well as same of crosses site scripting (XSS) attack, mostly user risk of the part web application security just because this type hacker attack directly on the database management system if any hacker attack the database so who is guess easily access data.
    While web application provide more facilitate for secure this type hacking attack. But most of hacker while attack include some file like that they are used XSS cross site scripting, SQL Injection, Header Injection, Log Injection.
    Hacker attack to the user database so that used code programs and every attacking program make them bogeyman. They are common and very successful attack to the internet.

Similar Threads

  1. Quick Guitar Question:!!!!!!!!!!! Plz Read if You Can Read Music!
    By Blitz in forum General Discussion Board
    Replies: 5
    Last Post: 03-18-15, 12:52 PM
  2. read only usb
    By morbidpete in forum Software Forum
    Replies: 0
    Last Post: 01-11-05, 05:14 PM
  3. winxp workaround?? 64 mb compact flash card cannot be read read.
    By yikes in forum Hardware & Overclocking
    Replies: 3
    Last Post: 03-08-02, 11:26 AM
  4. Read Your Horriscope's Trust me you wanna Read It
    By Brent in forum General Discussion Board
    Replies: 10
    Last Post: 07-13-01, 05:45 PM
  5. read this! LOL wtf? cableguy? anybody read
    By DraXiMuS in forum General Broadband Forum
    Replies: 8
    Last Post: 01-09-01, 05:36 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •