Results 1 to 2 of 2

Thread: IP mapping on firewall and outside firewall

  1. #1
    meow
    Guest

    IP mapping on firewall and outside firewall

    I have connected a Tandberg video conference equipment outside the
    firewall and assigned a real IP say, 202.195.123.123 to it. I only
    turn on the video conference equipment when we need to use it.

    Now I have a test server which is protected by the Netscreen-25
    firewall and need to do some testing using a real IP. I don't want to
    rent an IP for such temporary purpose. As the IP for the video
    conference equipment is seldom used, I intend to map this IP on the
    Netscreen-25 firewall to the testing server.

    I would like to know if doing this, when I turn on the Tandberg video
    conference equipment, will it cause any problem? If someone tries to
    connect to 202.195.123.123, will it connect to the Tandberg equipment
    or the internal test server?

    I know that I could just remove the mapping on the Netscreen when I
    need to use the Tandberg equipment, but it will mean that I want to
    save the trouble.

  2. #2
    Rick
    Guest

    Re: IP mapping on firewall and outside firewall

    meow wrote:
    > I have connected a Tandberg video conference equipment outside the
    > firewall and assigned a real IP say, 202.195.123.123 to it. I only
    > turn on the video conference equipment when we need to use it.
    >
    > Now I have a test server which is protected by the Netscreen-25
    > firewall and need to do some testing using a real IP. I don't want to
    > rent an IP for such temporary purpose. As the IP for the video
    > conference equipment is seldom used, I intend to map this IP on the
    > Netscreen-25 firewall to the testing server.
    >
    > I would like to know if doing this, when I turn on the Tandberg video
    > conference equipment, will it cause any problem? If someone tries to
    > connect to 202.195.123.123, will it connect to the Tandberg equipment
    > or the internal test server?
    >
    > I know that I could just remove the mapping on the Netscreen when I
    > need to use the Tandberg equipment, but it will mean that I want to
    > save the trouble.


    What protocols are on the test server?


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •