I have an internal network that uses 10.0.0.1 with a subnet of 255.255.0.0

I need to install a Cisco 2801 with AISK9 installed and connect to another
site using VPN through this 2801.

Can I assign the Cisco 2801 a static IP of 10.0.0.150 and connect it to my
static IP modem ?

Right now all traffic routes through the 10.0.0.1 gateway.

I need to send specific data through the VPN I will be establishing on this
separate Internet static IP that is not part of the existing network.

I have never done this before. Will I need to send the data to the internal
IP of the router, or once the VPN is connected, will I have to send to the
static IP at the other end of the VPN ?

Thanks for the help.

And if anyone can tell me where I can get the S28AISK9 or CD28-AISK9
software cheap that would be real helpful.

I did not know that without buying the additional software the router is a
2,000 dollar paperweight.

Thanks again





http://www.USENETHOST.com 100% Uncensored , 100% Anonymous, 5$/month Only!