Akbarri: ok before i used 131072. Speedtest results are
and heres the ping test directly to the server i play on:
Begäran gjorde timeout = Request made timeout
lots of time outs.. find a new server to play on is my suggestion
Hm yea i could do that but i got the annoying choke on every server :/
Hm i read about something called RASPPPoE is that anything that can help me if i install it?
correct, set DefaultSendWindow = 131072 (leave others as is)
hop 14-30 was server side problem, nothing we can do
RASPPPoE
http://user.cs.tu-berlin.de/~normanb/
http://www.speedguide.net/faq_in_q.p...gory=98&qid=37
Last edited by akbarri; 04-01-10 at 04:09 PM.
# OS: Windows, Linux # Browser: Blink, Gecko, Presto, Webkit + Squid + Bind
Hm i got no idea about the location.. In cs u cant see how far away the server is :S But i always try to play on swedish server because i live in sweden
But i got 1 question. After i done as you said with all my internet tweaks akbarri it look like this in cablenut:
Shouldnt it be better for my internet if i used the blank settings too? Once a guy in this homepage (speedguide.net) told be the best settings for my internet should be:
So then maybe it will be best if i keep the settings you told me and just fill in the blanks with the settings he wrote for me?
Thanks everyone for your help!
//Max
just make comparison for both settings. (i bet for "blanks / 1st pic" ones)
3 - 5 times
- www.speedtest.net
- www.pingtest.net
- tracert
# OS: Windows, Linux # Browser: Blink, Gecko, Presto, Webkit + Squid + Bind
Ok let's se what u think :P Test1 (your settings, pic 1)
Speedtest :
DL 7.06mbit UL 0.86 MS 27
DL 7.05 UL 0.86 MS 29
DL 7.03 UL 0.87 MS 32
Pingtest:
Loss 0% Ping 25ms Jitter 1
Loss 0% Ping 25ms Jitter 1
Loss 0% Ping 25ms Jitter 1
Tracert :
Test2----------------------------------------------------------------------------
Speedtest:
DL 12.05 UL 0.73 MS 27
DL 7.38 UL 0.78 MS 28
DL 10.43 UL 0.86 MS 30
Pingtest:
Loss 0% Ping 25ms Jitter 0
Loss 0% Ping 24ms Jitter 0
Loss 0% Ping 25ms Jitter 1
Tracert:![]()
So which should i pick :P and/or i could also try the settings that the cablenut homepage calculator tell me to use:
I really hope you can recommend something for me because im so confused
Ps: in the calculator i wrote my dl is 8000kbps ul 1000kbps and latency 29ms
Pic1 = stable DL/UL (88% from ads speed), stable pingtest, good tracert
Pic2 = unstable DL/UL (could get higher DL but lower UL), unstable pingtest (could get better jitter or worse ping), not bad tracert
i still bet with "1st pic" but i see that u could get 12.05Mbps speedtest
so i change TCPO settings to
TCP Optimizer Settings:
General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1500
TTL - 64
TCP Receive Window - 513920
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - check
Timestamps - uncheck
Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 10
LocalPriority - 5
Host Priority - 6
DNSPriority - 7
NetbtPriority - 8
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 0
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Cablenut Settings
DefaultSendWindow = 131072 (leave others as is)
"Round 2" Fight![]()
Last edited by akbarri; 04-02-10 at 11:58 AM.
# OS: Windows, Linux # Browser: Blink, Gecko, Presto, Webkit + Squid + Bind
Hhaha round 2:
Test3:
Speed
7.05 0.76 28
7.01 0.86 30
7.01 0.78 32
Ping
0% 24 0
0% 25 1
0% 25 0
Tracert:
Test4:
Speed
9.76 0.48 28
8.02 0.87 30
8.52 0.74 28
Ping
0% 26 1
0% 25 1
0% 25 0
Tracert:
AND the winner is!!! Test1 (i guess :P)
ps. It's wierd that i can get more than 8mbit dl because i cant even pay for higher.. :O 8mbit is the highest i can get where i live right now ^^
the winners:
stable DL/UL, stable pingtest, good tracert = Test 1
highest DL (but unstable DL/UL), not bad pingtest, not bad tracert = Test 4
use settings that suit with u
this is why u could get more than 8Mbps :
BDP (bytes) = total_available_bandwidth (KBytes/sec) x round_trip_time/RTT (ms)
example :
1st settings i put
TCP Receive Window = 256960
let say
Latency = 200ms
so ur estimate max DL speed
256960/200ms = 1284,8 * 8 = 10278,4 kbps = 10,3 Mbps
cause Latency is Variable value that why DL/UL speed also Variable
let see if
Latency = 500ms
256960/500ms = 513,92 * 8 = 4111,36 kbps = 4,1 Mbps (bad DL hah)
(u can easely read TCP Analyzer => BDP limit)
hope it help![]()
# OS: Windows, Linux # Browser: Blink, Gecko, Presto, Webkit + Squid + Bind
Hm maybe i should use test4.. Because the difference was the unstable dl but it was never below 8mbps so it was actually always higher dl than test1..
http://www.j79zlr.com/cablenutXP2k.php <--- that's the calculator i used.. The settings i should choose/write there is dsl with router, dl 8000kbps, ul 1000kbps and latency 200ms right?
Hm i have thought on a mix between test 1 and 4.. It look like this:
Maybe i should try it :O What's your thought about it( you're the smart one)?
I really don't think the problem is on your end dude, I think its within the network route. I'd talk to the tech support for your ISP and see what they can do and perhaps try other servers.
yap, dl 8000kbps, ul 1000kbps and latency 200ms
i prefer to blank this settings :
MaxNormLookupMemory
MaxFreeTcbs
MaxHashTableSize
FastSendDatagramThreshhold
EnableFastRouteLookup » might interfere with other network settings.
read the bottom of that page
http://www.j79zlr.com/cablenutXP2k.php
# OS: Windows, Linux # Browser: Blink, Gecko, Presto, Webkit + Squid + Bind
Bookmarks