Results 1 to 10 of 10

Thread: fanless 24 port gigabit switch

  1. #1
    Christopher Glaeser
    Guest

    fanless 24 port gigabit switch

    I'm currently using a Netgear JGS524 gigabit switch that works fine, but I'm
    trying to reduce fan noise in the office. I want to replace it with a
    fanless 24 port gigabit switch. The HP ProCurve 1400 looks like a good fit.
    Any comments on the HP 1400? Any other suggestions?

    Best,
    Christopher




  2. #2
    geoar75@gmail.com
    Guest

    Re: fanless 24 port gigabit switch

    Hi,

    I don't have any experience with that switch, but since the ventor
    doesn't use a fan I believe you won't have any particular problem
    using it. Provided that there is as much space as possible among the
    devices.

    Good luck!

    Giorgos

    --

    NetPros Community
    Connecting IT Pros from all over the World
    http://netpros.freeforums.org



    On 17 , 07:12, "Christopher Glaeser" <nos...@nospam.com> wrote:
    > I'm currently using a Netgear JGS524 gigabit switch that works fine, but I'm
    > trying to reduce fan noise in the office. *I want to replace it with a
    > fanless 24 port gigabit switch. *The HP ProCurve 1400 looks like a goodfit.
    > Any comments on the HP 1400? *Any other suggestions?
    >
    > Best,
    > Christopher



  3. #3
    Ansgar -59cobalt- Wiechers
    Guest

    Re: fanless 24 port gigabit switch

    Christopher Glaeser <nospam@nospam.com> wrote:
    > I'm currently using a Netgear JGS524 gigabit switch that works fine,
    > but I'm trying to reduce fan noise in the office. I want to replace
    > it with a fanless 24 port gigabit switch. The HP ProCurve 1400 looks
    > like a good fit. Any comments on the HP 1400? Any other suggestions?


    What makes you think your questions have anything at all to do with
    firewalls?

    cu
    59cobalt
    --
    "If a software developer ever believes a rootkit is a necessary part of
    their architecture they should go back and re-architect their solution."
    --Mark Russinovich

  4. #4
    Christopher Glaeser
    Guest

    Re: fanless 24 port gigabit switch

    > What makes you think your questions have anything at all to do with
    > firewalls?


    Good question. It was the best fit I could find that receives any traffic,
    but I'm open to suggestions.

    Best,
    Christopher



  5. #5
    Ansgar -59cobalt- Wiechers
    Guest

    Re: fanless 24 port gigabit switch

    Christopher Glaeser <nospam@nospam.com> wrote:
    >> What makes you think your questions have anything at all to do with
    >> firewalls?

    >
    > Good question. It was the best fit I could find that receives any
    > traffic, but I'm open to suggestions.


    Don't know about traffic, but you could try alt.comp.networking.routers
    or alt.comp.network.connectivity.

    cu
    59cobalt
    --
    "If a software developer ever believes a rootkit is a necessary part of
    their architecture they should go back and re-architect their solution."
    --Mark Russinovich

  6. #6
    geoar75@gmail.com
    Guest

    Re: fanless 24 port gigabit switch

    Concerning traffic, alt.comp.network.connectivity would be just fine.

    Giorgos

    --

    NetPros Community
    Connecting IT Pros from all over the World
    http://netpros.freeforums.org


    On 17 , 21:32, Ansgar -59cobalt- Wiechers
    <usenet-2...@planetcobalt.net> wrote:
    > Christopher Glaeser <nos...@nospam.com> wrote:
    > >> What makes you think your questions have anything at all to do with
    > >> firewalls?

    >
    > > Good question. *It was the best fit I could find that receives any
    > > traffic, but I'm open to suggestions.

    >
    > Don't know about traffic, but you could try alt.comp.networking.routers
    > or alt.comp.network.connectivity.
    >
    > cu
    > 59cobalt
    > --
    > "If a software developer ever believes a rootkit is a necessary part of
    > their architecture they should go back and re-architect their solution."
    > --Mark Russinovich



  7. #7
    Ansgar -59cobalt- Wiechers
    Guest

    Re: fanless 24 port gigabit switch

    Christopher Glaeser <nospam@nospam.com> wrote:
    >> What makes you think your questions have anything at all to do with
    >> firewalls?

    >
    > Good question. It was the best fit I could find that receives any
    > traffic, but I'm open to suggestions.


    Don't know about traffic, but you could try alt.comp.networking.routers
    or alt.comp.networking.connectivity.

    Supersede: typo fixed.

    cu
    59cobalt
    --
    "If a software developer ever believes a rootkit is a necessary part of
    their architecture they should go back and re-architect their solution."
    --Mark Russinovich

  8. #8
    Todd H.
    Guest

    Re: fanless 24 port gigabit switch

    Ansgar -59cobalt- Wiechers <usenet-2009@planetcobalt.net> writes:

    > Christopher Glaeser <nospam@nospam.com> wrote:
    >> I'm currently using a Netgear JGS524 gigabit switch that works fine,
    >> but I'm trying to reduce fan noise in the office. I want to replace
    >> it with a fanless 24 port gigabit switch. The HP ProCurve 1400 looks
    >> like a good fit. Any comments on the HP 1400? Any other suggestions?

    >
    > What makes you think your questions have anything at all to do with
    > firewalls?


    What make you think we have enough traffic here (or hell anywhere on
    usenet) to throw down a circa 1995 bitch fit about an off-topic but
    still hardware related non-spam post? LOL.

    --
    Todd H.
    http://www.toddh.net/

  9. #9
    buzzard
    Guest

    Re: fanless 24 port gigabit switch

    Christopher Glaeser wrote:
    > I'm currently using a Netgear JGS524 gigabit switch that works fine, but I'm
    > trying to reduce fan noise in the office.


    I don't know how difficult it might be to open the JGS524, but
    I do know that some of the newer fans are pretty quiet.
    You might be able to install a quieter fan.

  10. #10
    goarilla
    Guest

    Re: fanless 24 port gigabit switch

    On Thu, 19 Nov 2009 18:37:54 -0400, buzzard wrote:

    > Christopher Glaeser wrote:
    >> I'm currently using a Netgear JGS524 gigabit switch that works fine,
    >> but I'm trying to reduce fan noise in the office.

    >
    > I don't know how difficult it might be to open the JGS524, but I do know
    > that some of the newer fans are pretty quiet. You might be able to
    > install a quieter fan.


    bad idea you'll be voiding warranties, and a lot of
    enterprise switches have lifetime warranties (well HP has :D)

    although this isn't an enterprise switch

Similar Threads

  1. How to turn on/off Wireless in various Laptop Models
    By Syed in forum alt.internet.wireless
    Replies: 21
    Last Post: 08-28-14, 11:33 AM
  2. Reliable router for small business? 12-20 computers + printers
    By allandelmare in forum Networking Forum
    Replies: 11
    Last Post: 06-29-09, 03:44 PM
  3. connecting gigabit switch to modem = slower download speed tests
    By edlogic in forum General Broadband Forum
    Replies: 7
    Last Post: 05-08-09, 08:15 AM
  4. (long post) New system and new tech advice and help.
    By osuprowler in forum Hardware & Overclocking
    Replies: 11
    Last Post: 10-07-08, 10:05 PM
  5. Switch confusion and new topology
    By jjanes in forum Networking Forum
    Replies: 1
    Last Post: 04-29-08, 03:49 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •