Page 2 of 2 FirstFirst 12
Results 21 to 25 of 25

Thread: DLink GWL-G630 Entry Point Problem - wlanapi.dll

  1. #21
    =?Utf-8?B?bGV5bGFuZA==?=
    Guest

    RE: DLink GWL-G630 Entry Point Problem - wlanapi.dll

    Yes we are all aware of the problem with apsGetReady.
    Everybody has their own solution, blogging does not solve it.
    Simple question, what is MICROSOFT doing to resolve this. Could MICROSOFT
    make an official statement. If WZCSLDR2i s not within their remit then we can
    seek the answer elsewhere.

  2. #22
    Pavel A.
    Guest

    Re: DLink GWL-G630 Entry Point Problem - wlanapi.dll

    "leyland" <leyland@discussions.microsoft.com> wrote in message
    news:ECA3C705-10BD-4B0B-893C-9A55ECCC0AD7@microsoft.com...
    > Yes we are all aware of the problem with apsGetReady.
    > Everybody has their own solution, blogging does not solve it.
    > Simple question, what is MICROSOFT doing to resolve this. Could MICROSOFT
    > make an official statement. If WZCSLDR2i s not within their remit then we
    > can
    > seek the answer elsewhere.


    Please, locate WZCSLDR2i.DLL on your machine and open it's properties.
    Is the company name on the Version tab Microsoft?

    --PA



  3. #23
    =?Utf-8?B?SmFm?=
    Guest

    Re: DLink GWL-G630 Entry Point Problem - wlanapi.dll

    I fixed problem by uninstalling SP3. Easiest way to fix problem what MS made.

    -Jaf

    "Pavel A." wrote:

    > Get the SP3 compatible update for your D-Link software/driver.
    > For details, search archive of this NG, this has been already discussed
    > here.
    >
    > Regards,
    > --PA
    >
    > turfsurf wrote:
    > > "...could not be located in the dynamic link library wlanapi.dll"
    > > I had this same problem after upgrading to sp3.I have a D-Link AirPlus G DWL-G510 Wireless pci adapter.(DESKTOP PC)
    > > A very simple fix is to:
    > >
    > > 1.Boot in safemode with networking (F8 on start up)
    > > 2.Go to C:\WINDOWS\system32
    > > 3.You will probably find two "wlanapi.dll"
    > > that is: wlanapi.dll and wlanapi(2).dll
    > > 4.wlanapi(2).dll is from sp3 (didn't overwrite
    > > previous one.)
    > > 5.Delete wlanapi.dll and rename wlanapi(2).dll to
    > > wlanapi.dll and reboot.
    > > 6.Worked fine for me
    > >

    >


  4. #24
    =?Utf-8?B?SmFmYXJpbg==?=
    Guest

    Re: DLink GWL-G630 Entry Point Problem - wlanapi.dll

    I checked wlanapi.dll and it seems that SP3 version of it is made by
    MicroSoft. I hope MS fix this conflict, otherwice I cant install SP3 back.

    BR
    Jaf

    "Pavel A." wrote:

    > "leyland" <leyland@discussions.microsoft.com> wrote in message
    > news:ECA3C705-10BD-4B0B-893C-9A55ECCC0AD7@microsoft.com...
    > > Yes we are all aware of the problem with apsGetReady.
    > > Everybody has their own solution, blogging does not solve it.
    > > Simple question, what is MICROSOFT doing to resolve this. Could MICROSOFT
    > > make an official statement. If WZCSLDR2i s not within their remit then we
    > > can
    > > seek the answer elsewhere.

    >
    > Please, locate WZCSLDR2i.DLL on your machine and open it's properties.
    > Is the company name on the Version tab Microsoft?
    >
    > --PA
    >
    >
    >


  5. #25
    Girl
    Guest

    reply

    I was hoping that this would work for me, but unfortunately there are not two wlanapi.dll files present.

    I have updated drivers, but that has not resolved the issue either.



    turfsurf wrote:

    DLink GWL-G630 Entry Point Problem - wlanapi.dll
    22-Oct-08

    "...could not be located in the dynamic link library wlanapi.dll"
    I had this same problem after upgrading to sp3.I have a D-Link AirPlus G DWL-G510 Wireless pci adapter.(DESKTOP PC)
    A very simple fix is to:

    1.Boot in safemode with networking (F8 on start up)
    2.Go to C:\WINDOWS\system32
    3.You will probably find two "wlanapi.dll"
    that is: wlanapi.dll and wlanapi(2).dll
    4.wlanapi(2).dll is from sp3 (didn't overwrite
    previous one.)
    5.Delete wlanapi.dll and rename wlanapi(2).dll to
    wlanapi.dll and reboot.
    6.Worked fine for me

    Previous Posts In This Thread:

    On Tuesday, May 06, 2008 5:21 AM
    Duckysan wrote:

    DLink GWL-G630 Entry Point Problem - wlanapi.dll
    Since upgrading my Acer laptop (Travelmate 2300) to XP SP3, I cannot use the
    Dlink utility. I receive the following error:

    'The procedure entry point apsGetInterfaceCount could not be located in the
    dynamic link library wlanapi.dll'
    I have removed and re-installed the drivers/software, but no improvement.
    Web search suggests compatibility problem with Dlink driver/dll.
    Whilst I still have wireless connectivity, the Dlink utilities do not work.
    It seems this is an SP3 issue - other users report the issue is resolved if
    they revert back to SP2.
    There must be a better resolution!

    On Tuesday, May 06, 2008 7:29 AM
    Barb Bowman wrote:

    either use Windows native WZC features to manage the wireless(uninstall the
    either use Windows native WZC features to manage the wireless
    (uninstall the utility and keep the wireless) or contact D-Link
    support/search their downloads for a fixed version.

    On Tue, 6 May 2008 02:21:01 -0700, Duckysan1
    <Duckysan1@discussions.microsoft.com> wrote:

    --

    Barb Bowman
    MS-MVP
    http://www.microsoft.com/windowsxp/e...ts/bowman.mspx
    http://blogs.digitalmediaphile.com/barb/

    On Tuesday, May 06, 2008 10:08 AM
    Duckysan wrote:

    Thanks for the comments.It seems XPSP3 adds a new version of wlanapi.
    Thanks for the comments.
    It seems XPSP3 adds a new version of wlanapi.dll that conflicts and replaces
    the Dlink DLL. I have written to Dlink, but am not holding my breath. The
    following appears on the 'Tech ARP' site:

    "Windows XP SP3 introduces a new .dll file that is named Wlanapi.dll.
    Certain device driver installations for some third-party wireless network
    adapters also install a Wlanapi.dll which will be replaced by SP3 resulting
    in errors.

    This error message will appear during every restart after you install
    Windows XP Service Pack 3 : "The procedure entry point apsSearchInterface
    could not be located in the dynamic link library wlanapi.dll"

    Impact : Low ??? Obtaining updated drivers for the WLAN device resolves this
    issue
    KB Content : KB 950720"

    I'll check it out.

    "Barb Bowman" wrote:

    On Tuesday, May 06, 2008 5:50 PM
    Pavel A. wrote:

    Wlanapi.
    Wlanapi.dll is part of the new wireless API introduced quite long
    ago in KB918997, and now integrated into SP3.

    The Dlink package could include some other version of this dll,
    because the Microsoft's wlanapi.dll does not have export
    function named "apsSearchInterface".
    IMHO Dlink should work with MS to resolve this issue.

    Regards,
    --PA


    "Duckysan1" <Duckysan1@discussions.microsoft.com> wrote in message
    news:EC4E9B6F-7CDB-4631-9E79-CF220685546E@microsoft.com...

    On Wednesday, May 07, 2008 4:40 AM
    Barb Bowman wrote:

    It isn't just D-Link, that utility is supplied by the wirelesschipset
    It isn't just D-Link, that utility is supplied by the wireless
    chipset manufacturer and customized by multiple folks using that
    chipset. When they get bits from the source...

    On Wed, 7 May 2008 00:50:48 +0300, "Pavel A."
    <pavel_a@NOwritemeNO.com> wrote:

    --

    Barb Bowman
    MS-MVP
    http://www.microsoft.com/windowsxp/e...ts/bowman.mspx
    http://blogs.digitalmediaphile.com/barb/

    On Friday, May 09, 2008 10:13 AM
    ciccio formaggio wrote:

    DLink GWL-G630 Entry Point Problem - wlanapi.dll
    The solution is much more simpler and is reported here
    http://kb.cadzow.com.au:15384/Cadzow...s.aspx?ID=1898

    On Friday, May 09, 2008 10:16 AM
    ciccio wrote:

    DLink GWL-G630 Entry Point Problem - wlanapi.dll - Duckysan
    The solution is here
    http://kb.cadzow.com.au:15384/Cadzow...s.aspx?ID=1898

    The D-Link AirPlus Utility does not work with Windows XP Service Pack 3. Upon loading, it displays: ?AirGCFG.exe - Entry Point Not Found. The procedure enry point apsGetInterfaceCount could not be located in the dynamic link library wlanapi.dll.?.
    A workaround is to use the pre-SP3 version of wlanapi.dll and place it in the appropriate directories. Upon loading, this version of the file will be used instead of the version in the System32 directory.

    xcopy %Windir%\$NtServicePackUninstall$\wlanapi.dll "%ProgramFiles%\D-Link\AirPlus G"
    xcopy %Windir%\$NtServicePackUninstall$\wlanapi.dll "%ProgramFiles%\ANI\ANIWZCS2"

    On Sunday, June 01, 2008 8:58 PM
    rmsanangel wrote:

    can you please post the exact steps to fix this?
    can you please post the exact steps to fix this? I need help, thanks!

    "ciccio" wrote:

    On Saturday, June 14, 2008 7:58 PM
    Sergey wrote:

    RE: DLink GWL-G630 Entry Point Problem - wlanapi.dll - Duckysan
    Unfortunately for my DI-624 did not work.

    "ciccio" wrote:

    On Sunday, June 15, 2008 6:09 AM
    Barb Bowman wrote:

    the DI-624 is a router, not a wireless card.
    the DI-624 is a router, not a wireless card. You need to start a new
    thread and describe the issue you are having and include the info on
    the wireless card you are using.

    On Sat, 14 Jun 2008 16:58:00 -0700, Sergey U.
    <SergeyU@discussions.microsoft.com> wrote:

    --

    Barb Bowman
    MS-MVP
    http://www.microsoft.com/windowsxp/e...ts/bowman.mspx
    http://blogs.digitalmediaphile.com/barb/

    On Sunday, June 15, 2008 10:55 AM
    Sergey wrote:

    Re: DLink GWL-G630 Entry Point Problem - wlanapi.dll - Duckysan
    Sorry, I put wrong data : indeed I have a wireless card DWL-G520 rev.B, with
    which the problem is associated ( on top of that, yes, I have a router DI-624
    but it does not relates to the issue ).

    I updated DWL-G520 rev.B driver to version 4.40 ,as prescribed on
    www.dlynk.com, for SP3 upgrades, and I still got two messages:

    AirPlusCFG.exe Entry Point Not found apsGetInterfaceCount not located in the
    dynamic link library wlanapi.dll

    WZCSLDR2.exe Entry Point Not found aosInitialize not located in the dynamic
    link library wlanapi.dll

    So, the problem looks to be same as described above.

    I tried to copy files as suggested above , did not work...

    "Barb Bowman" wrote:

    On Sunday, June 15, 2008 4:09 PM
    Barb Bowman wrote:

    you don't actually need the DLink utility to manage the wireless.
    you don't actually need the DLink utility to manage the wireless.
    you can use Windows built in features to do that. you can uninstall
    the AirPlus config utility.

    On Sun, 15 Jun 2008 07:55:00 -0700, Sergey U.
    <SergeyU@discussions.microsoft.com> wrote:

    --

    Barb Bowman
    MS-MVP
    http://www.microsoft.com/windowsxp/e...ts/bowman.mspx
    http://blogs.digitalmediaphile.com/barb/

    On Wednesday, October 22, 2008 11:13 AM
    turfsurf wrote:

    DLink GWL-G630 Entry Point Problem - wlanapi.dll
    "...could not be located in the dynamic link library wlanapi.dll"
    I had this same problem after upgrading to sp3.I have a D-Link AirPlus G DWL-G510 Wireless pci adapter.(DESKTOP PC)
    A very simple fix is to:

    1.Boot in safemode with networking (F8 on start up)
    2.Go to C:\WINDOWS\system32
    3.You will probably find two "wlanapi.dll"
    that is: wlanapi.dll and wlanapi(2).dll
    4.wlanapi(2).dll is from sp3 (didn't overwrite
    previous one.)
    5.Delete wlanapi.dll and rename wlanapi(2).dll to
    wlanapi.dll and reboot.
    6.Worked fine for me

    On Tuesday, November 25, 2008 8:34 AM
    leylan wrote:

    RE: DLink GWL-G630 Entry Point Problem - wlanapi.dll
    "Duckysan1" wrote:

    On Tuesday, November 25, 2008 8:46 AM
    leylan wrote:

    On booting up I am shown the WZCSLDR2/WLANAPI.DlL/apsGetReady.
    On booting up I am shown the WZCSLDR2/WLANAPI.DlL/apsGetReady. I've tride to
    remove this no joy. I then discover that there are spyware companies claiming
    to be able to remove this, of course for a fee. Do these work ?.
    Just what is Windows doing to resolve this problem. Are they working on this
    as we speak. Come on Windows you must be aware of this problem, give us an
    answer.

    On Tuesday, November 25, 2008 8:51 AM
    R. McCarty wrote:

    Not a Windows/Microsoft issue at all.
    Not a Windows/Microsoft issue at all. You have a support applet for
    a Wireless card that is attempting to start at boot. Either the .Dll is not
    found or the registration for it is missing/incorrect.
    Several options - either use Windows Native Wireless to control the
    device or check your card's vendor website for an updated driver &
    support applet.

    "leyland" <leyland@discussions.microsoft.com> wrote in message
    news:6A055AA6-96CD-454D-96AC-87F91CFD3CAE@microsoft.com...

    On Tuesday, November 25, 2008 9:44 AM
    Richard in AZ wrote:

    Actually it is a Microsoft/Windows issue.
    Actually it is a Microsoft/Windows issue. They rewrote a dll file, that Dlink was using, with the
    issue of SP3.
    The new dll file is not compatible with the DLink drivers.
    However DLink should now have a patch, or new driver, for their card. But seems they don't care
    about some older cards.
    Going to "msconfig" and turning off the DLink monitoring software stops the nag window and does not
    stop the card operation.

    "R. McCarty" <PcEngWork-NoSpam_@mindspring.com> wrote in message
    news:eiGC%23TwTJHA.1184@TK2MSFTNGP03.phx.gbl...

    On Tuesday, November 25, 2008 9:51 AM
    R. McCarty wrote:

    Thanks for the additional info, wasn't aware of the circumstances of the.Dll.
    Thanks for the additional info, was not aware of the circumstances of the
    ..Dll.

    On Wednesday, November 26, 2008 9:00 PM
    Kelly wrote:

    Beta tester are you?
    Beta tester are you? <eg>

    --

    All the Best and Happy Turkey Day,
    Kelly (MS-MVP/DTS&XP)

    Taskbar Repair Tool Plus!
    http://www.kellys-korner-xp.com/taskbarplus!.htm

    On Thursday, November 27, 2008 7:47 AM
    leylan wrote:




    On Thursday, November 27, 2008 8:00 AM
    leylan wrote:

    Yes we are all aware of the problem with apsGetReady.
    Yes we are all aware of the problem with apsGetReady.
    Everybody has their own solution, blogging does not solve it.
    Simple question, what is MICROSOFT doing to resolve this. Could MICROSOFT
    make an official statement. If WZCSLDR2i s not within their remit then we can
    seek the answer elsewhere.

    On Friday, November 28, 2008 10:30 AM
    Pavel A. wrote:

    Re: DLink GWL-G630 Entry Point Problem - wlanapi.dll
    Please, locate WZCSLDR2i.DLL on your machine and open it is properties.
    Is the company name on the Version tab Microsoft?

    --PA

    On Saturday, December 27, 2008 5:55 AM
    Ja wrote:

    I fixed problem by uninstalling SP3. Easiest way to fix problem what MS made.
    I fixed problem by uninstalling SP3. Easiest way to fix problem what MS made.

    -Jaf

    "Pavel A." wrote:

    On Saturday, December 27, 2008 6:00 AM
    Jafari wrote:

    I checked wlanapi.dll and it seems that SP3 version of it is made by MicroSoft.
    I checked wlanapi.dll and it seems that SP3 version of it is made by
    MicroSoft. I hope MS fix this conflict, otherwice I cant install SP3 back.

    BR
    Jaf

    "Pavel A." wrote:


    Submitted via EggHeadCafe - Software Developer Portal of Choice
    WPF GridView Sample To Insert, Update, and Delete Records
    http://www.eggheadcafe.com/tutorials...ple-to-in.aspx

Similar Threads

  1. network problem.. could it be virus attack?
    By maxchock in forum Networking Forum
    Replies: 0
    Last Post: 10-04-08, 05:18 AM
  2. Re: Odd problem: Belkin N1 access point, connected to our businessswitch, slows the net
    By smlunatick in forum ms.public.windows.networking.wireless
    Replies: 3
    Last Post: 04-11-08, 09:28 AM
  3. Replies: 0
    Last Post: 10-14-07, 01:33 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •