Page 1 of 2 12 LastLast
Results 1 to 20 of 25

Thread: DLink GWL-G630 Entry Point Problem - wlanapi.dll

  1. #1
    =?Utf-8?B?RHVja3lzYW4x?=
    Guest

    DLink GWL-G630 Entry Point Problem - wlanapi.dll

    Since upgrading my Acer laptop (Travelmate 2300) to XP SP3, I cannot use the
    Dlink utility. I receive the following error:

    'The procedure entry point apsGetInterfaceCount could not be located in the
    dynamic link library wlanapi.dll'
    I have removed and re-installed the drivers/software, but no improvement.
    Web search suggests compatibility problem with Dlink driver/dll.
    Whilst I still have wireless connectivity, the Dlink utilities do not work.
    It seems this is an SP3 issue - other users report the issue is resolved if
    they revert back to SP2.
    There must be a better resolution!


  2. #2
    Barb Bowman
    Guest

    Re: DLink GWL-G630 Entry Point Problem - wlanapi.dll

    either use Windows native WZC features to manage the wireless
    (uninstall the utility and keep the wireless) or contact D-Link
    support/search their downloads for a fixed version.

    On Tue, 6 May 2008 02:21:01 -0700, Duckysan1
    <Duckysan1@discussions.microsoft.com> wrote:

    >Since upgrading my Acer laptop (Travelmate 2300) to XP SP3, I cannot use the
    >Dlink utility. I receive the following error:
    >
    >'The procedure entry point apsGetInterfaceCount could not be located in the
    >dynamic link library wlanapi.dll'
    > I have removed and re-installed the drivers/software, but no improvement.
    >Web search suggests compatibility problem with Dlink driver/dll.
    >Whilst I still have wireless connectivity, the Dlink utilities do not work.
    >It seems this is an SP3 issue - other users report the issue is resolved if
    >they revert back to SP2.
    >There must be a better resolution!

    --

    Barb Bowman
    MS-MVP
    http://www.microsoft.com/windowsxp/e...ts/bowman.mspx
    http://blogs.digitalmediaphile.com/barb/

  3. #3
    =?Utf-8?B?RHVja3lzYW4x?=
    Guest

    Re: DLink GWL-G630 Entry Point Problem - wlanapi.dll

    Thanks for the comments.
    It seems XPSP3 adds a new version of wlanapi.dll that conflicts and replaces
    the Dlink DLL. I have written to Dlink, but am not holding my breath. The
    following appears on the 'Tech ARP' site:

    "Windows XP SP3 introduces a new .dll file that is named Wlanapi.dll.
    Certain device driver installations for some third-party wireless network
    adapters also install a Wlanapi.dll which will be replaced by SP3 resulting
    in errors.

    This error message will appear during every restart after you install
    Windows XP Service Pack 3 : "The procedure entry point apsSearchInterface
    could not be located in the dynamic link library wlanapi.dll"

    Impact : Low – Obtaining updated drivers for the WLAN device resolves this
    issue
    KB Content : KB 950720"

    I'll check it out.

    "Barb Bowman" wrote:

    > either use Windows native WZC features to manage the wireless
    > (uninstall the utility and keep the wireless) or contact D-Link
    > support/search their downloads for a fixed version.
    >
    >


  4. #4
    Pavel A.
    Guest

    Re: DLink GWL-G630 Entry Point Problem - wlanapi.dll

    Wlanapi.dll is part of the new wireless API introduced quite long
    ago in KB918997, and now integrated into SP3.

    The Dlink package could include some other version of this dll,
    because the Microsoft's wlanapi.dll does not have export
    function named "apsSearchInterface".
    IMHO Dlink should work with MS to resolve this issue.

    Regards,
    --PA


    "Duckysan1" <Duckysan1@discussions.microsoft.com> wrote in message
    news:EC4E9B6F-7CDB-4631-9E79-CF220685546E@microsoft.com...
    > Thanks for the comments.
    > It seems XPSP3 adds a new version of wlanapi.dll that conflicts and
    > replaces
    > the Dlink DLL. I have written to Dlink, but am not holding my breath.
    > The
    > following appears on the 'Tech ARP' site:
    >
    > "Windows XP SP3 introduces a new .dll file that is named Wlanapi.dll.
    > Certain device driver installations for some third-party wireless network
    > adapters also install a Wlanapi.dll which will be replaced by SP3
    > resulting
    > in errors.
    >
    > This error message will appear during every restart after you install
    > Windows XP Service Pack 3 : "The procedure entry point apsSearchInterface
    > could not be located in the dynamic link library wlanapi.dll"
    >
    > Impact : Low ?" Obtaining updated drivers for the WLAN device resolves
    > this
    > issue
    > KB Content : KB 950720"
    >
    > I'll check it out.
    >
    > "Barb Bowman" wrote:
    >
    >> either use Windows native WZC features to manage the wireless
    >> (uninstall the utility and keep the wireless) or contact D-Link
    >> support/search their downloads for a fixed version.
    >>
    >>


  5. #5
    Barb Bowman
    Guest

    Re: DLink GWL-G630 Entry Point Problem - wlanapi.dll

    It isn't just D-Link, that utility is supplied by the wireless
    chipset manufacturer and customized by multiple folks using that
    chipset. When they get bits from the source...

    On Wed, 7 May 2008 00:50:48 +0300, "Pavel A."
    <pavel_a@NOwritemeNO.com> wrote:

    >Wlanapi.dll is part of the new wireless API introduced quite long
    >ago in KB918997, and now integrated into SP3.
    >
    >The Dlink package could include some other version of this dll,
    >because the Microsoft's wlanapi.dll does not have export
    >function named "apsSearchInterface".
    >IMHO Dlink should work with MS to resolve this issue.
    >
    >Regards,
    >--PA
    >
    >
    >"Duckysan1" <Duckysan1@discussions.microsoft.com> wrote in message
    >news:EC4E9B6F-7CDB-4631-9E79-CF220685546E@microsoft.com...
    >> Thanks for the comments.
    >> It seems XPSP3 adds a new version of wlanapi.dll that conflicts and
    >> replaces
    >> the Dlink DLL. I have written to Dlink, but am not holding my breath.
    >> The
    >> following appears on the 'Tech ARP' site:
    >>
    >> "Windows XP SP3 introduces a new .dll file that is named Wlanapi.dll.
    >> Certain device driver installations for some third-party wireless network
    >> adapters also install a Wlanapi.dll which will be replaced by SP3
    >> resulting
    >> in errors.
    >>
    >> This error message will appear during every restart after you install
    >> Windows XP Service Pack 3 : "The procedure entry point apsSearchInterface
    >> could not be located in the dynamic link library wlanapi.dll"
    >>
    >> Impact : Low ?" Obtaining updated drivers for the WLAN device resolves
    >> this
    >> issue
    >> KB Content : KB 950720"
    >>
    >> I'll check it out.
    >>
    >> "Barb Bowman" wrote:
    >>
    >>> either use Windows native WZC features to manage the wireless
    >>> (uninstall the utility and keep the wireless) or contact D-Link
    >>> support/search their downloads for a fixed version.
    >>>
    >>>

    --

    Barb Bowman
    MS-MVP
    http://www.microsoft.com/windowsxp/e...ts/bowman.mspx
    http://blogs.digitalmediaphile.com/barb/

  6. #6
    ciccio formaggio
    Guest

    DLink GWL-G630 Entry Point Problem - wlanapi.dll

    The solution is much more simpler and is reported here
    http://kb.cadzow.com.au:15384/Cadzow...s.aspx?ID=1898

  7. #7
    ciccio
    Guest

    DLink GWL-G630 Entry Point Problem - wlanapi.dll -Duckysan

    The solution is here
    http://kb.cadzow.com.au:15384/Cadzow...s.aspx?ID=1898

    The D-Link AirPlus Utility does not work with Windows XP Service Pack 3. Upon loading, it displays: AirGCFG.exe - Entry Point Not Found. The procedure enry point apsGetInterfaceCount could not be located in the dynamic link library wlanapi.dll..
    A workaround is to use the pre-SP3 version of wlanapi.dll and place it in the appropriate directories. Upon loading, this version of the file will be used instead of the version in the System32 directory.

    xcopy %Windir%\$NtServicePackUninstall$\wlanapi.dll "%ProgramFiles%\D-Link\AirPlus G"
    xcopy %Windir%\$NtServicePackUninstall$\wlanapi.dll "%ProgramFiles%\ANI\ANIWZCS2"




  8. #8
    Pavel A.
    Guest

    Re: DLink GWL-G630 Entry Point Problem - wlanapi.dll - Duckysan

    "ciccio" wrote in message
    news:200859101624dsrf42qyztj6hnb@temporaryinbox.com...
    > The solution is here
    > http://kb.cadzow.com.au:15384/Cadzow...s.aspx?ID=1898
    >
    > The D-Link AirPlus Utility does not work with Windows XP Service Pack 3.
    > Upon loading, it displays: "AirGCFG.exe - Entry Point Not Found. The
    > procedure enry point apsGetInterfaceCount could not be located in the
    > dynamic link library wlanapi.dll.".
    > A workaround is to use the pre-SP3 version of wlanapi.dll and place it in
    > the appropriate directories. Upon loading, this version of the file will
    > be used instead of the version in the System32 directory.
    >
    > xcopy %Windir%\$NtServicePackUninstall$\wlanapi.dll
    > "%ProgramFiles%\D-Link\AirPlus G"
    > xcopy %Windir%\$NtServicePackUninstall$\wlanapi.dll
    > "%ProgramFiles%\ANI\ANIWZCS2"
    >


    Again, the "pre-SP3 version" makes no sense. This DLL conflict can occur
    even on SP2 with KB KB918997, so whoever maintains AirGCFG.exe is
    going to rename their DLL, or, at least, install it into their app dir
    instead of system32.

    Regards,
    --PA



  9. #9
    Barb Bowman
    Guest

    Re: DLink GWL-G630 Entry Point Problem - wlanapi.dll - Duckysan

    the DI-624 is a router, not a wireless card. You need to start a new
    thread and describe the issue you are having and include the info on
    the wireless card you are using.

    On Sat, 14 Jun 2008 16:58:00 -0700, Sergey U.
    <SergeyU@discussions.microsoft.com> wrote:

    >Unfortunately for my DI-624 did not work.
    >
    >"ciccio" wrote:
    >
    >> The solution is here
    >> http://kb.cadzow.com.au:15384/Cadzow...s.aspx?ID=1898
    >>
    >> The D-Link AirPlus Utility does not work with Windows XP Service Pack 3. Upon loading, it displays: AirGCFG.exe - Entry Point Not Found. The procedure enry point apsGetInterfaceCount could not be located in the dynamic link library wlanapi.dll..
    >> A workaround is to use the pre-SP3 version of wlanapi.dll and place it in the appropriate directories. Upon loading, this version of the file will be used instead of the version in the System32 directory.
    >>
    >> xcopy %Windir%\$NtServicePackUninstall$\wlanapi.dll "%ProgramFiles%\D-Link\AirPlus G"
    >> xcopy %Windir%\$NtServicePackUninstall$\wlanapi.dll "%ProgramFiles%\ANI\ANIWZCS2"
    >>
    >>
    >>
    >>

    --

    Barb Bowman
    MS-MVP
    http://www.microsoft.com/windowsxp/e...ts/bowman.mspx
    http://blogs.digitalmediaphile.com/barb/

  10. #10
    =?Utf-8?B?U2VyZ2V5IFUu?=
    Guest

    Re: DLink GWL-G630 Entry Point Problem - wlanapi.dll - Duckysan

    Sorry, I put wrong data : indeed I have a wireless card DWL-G520 rev.B, with
    which the problem is associated ( on top of that, yes, I have a router DI-624
    but it does not relates to the issue ).

    I updated DWL-G520 rev.B driver to version 4.40 ,as prescribed on
    www.dlynk.com, for SP3 upgrades, and I still got two messages:

    AirPlusCFG.exe Entry Point Not found apsGetInterfaceCount not located in the
    dynamic link library wlanapi.dll

    WZCSLDR2.exe Entry Point Not found aosInitialize not located in the dynamic
    link library wlanapi.dll

    So, the problem looks to be same as described above.

    I tried to copy files as suggested above , did not work...

    "Barb Bowman" wrote:

    > the DI-624 is a router, not a wireless card. You need to start a new
    > thread and describe the issue you are having and include the info on
    > the wireless card you are using.
    >
    > On Sat, 14 Jun 2008 16:58:00 -0700, Sergey U.
    > <SergeyU@discussions.microsoft.com> wrote:
    >
    > >Unfortunately for my DI-624 did not work.
    > >
    > >"ciccio" wrote:
    > >
    > >> The solution is here
    > >> http://kb.cadzow.com.au:15384/Cadzow...s.aspx?ID=1898
    > >>
    > >> The D-Link AirPlus Utility does not work with Windows XP Service Pack 3. Upon loading, it displays: “AirGCFG.exe - Entry Point Not Found. The procedure enry point apsGetInterfaceCount could not be located in the dynamic link library wlanapi.dll.”.
    > >> A workaround is to use the pre-SP3 version of wlanapi.dll and place it in the appropriate directories. Upon loading, this version of the file will be used instead of the version in the System32 directory.
    > >>
    > >> xcopy %Windir%\$NtServicePackUninstall$\wlanapi.dll "%ProgramFiles%\D-Link\AirPlus G"
    > >> xcopy %Windir%\$NtServicePackUninstall$\wlanapi.dll "%ProgramFiles%\ANI\ANIWZCS2"
    > >>
    > >>
    > >>
    > >>

    > --
    >
    > Barb Bowman
    > MS-MVP
    > http://www.microsoft.com/windowsxp/e...ts/bowman.mspx
    > http://blogs.digitalmediaphile.com/barb/
    >


  11. #11
    Barb Bowman
    Guest

    Re: DLink GWL-G630 Entry Point Problem - wlanapi.dll - Duckysan

    you don't actually need the DLink utility to manage the wireless.
    you can use Windows built in features to do that. you can uninstall
    the AirPlus config utility.

    On Sun, 15 Jun 2008 07:55:00 -0700, Sergey U.
    <SergeyU@discussions.microsoft.com> wrote:

    >Sorry, I put wrong data : indeed I have a wireless card DWL-G520 rev.B, with
    >which the problem is associated ( on top of that, yes, I have a router DI-624
    >but it does not relates to the issue ).
    >
    >I updated DWL-G520 rev.B driver to version 4.40 ,as prescribed on
    >www.dlynk.com, for SP3 upgrades, and I still got two messages:
    >
    >AirPlusCFG.exe Entry Point Not found apsGetInterfaceCount not located in the
    >dynamic link library wlanapi.dll
    >
    >WZCSLDR2.exe Entry Point Not found aosInitialize not located in the dynamic
    >link library wlanapi.dll
    >
    >So, the problem looks to be same as described above.
    >
    >I tried to copy files as suggested above , did not work...
    >
    >"Barb Bowman" wrote:
    >
    >> the DI-624 is a router, not a wireless card. You need to start a new
    >> thread and describe the issue you are having and include the info on
    >> the wireless card you are using.
    >>
    >> On Sat, 14 Jun 2008 16:58:00 -0700, Sergey U.
    >> <SergeyU@discussions.microsoft.com> wrote:
    >>
    >> >Unfortunately for my DI-624 did not work.
    >> >
    >> >"ciccio" wrote:
    >> >
    >> >> The solution is here
    >> >> http://kb.cadzow.com.au:15384/Cadzow...s.aspx?ID=1898
    >> >>
    >> >> The D-Link AirPlus Utility does not work with Windows XP Service Pack 3. Upon loading, it displays: AirGCFG.exe - Entry Point Not Found. The procedure enry point apsGetInterfaceCount could not be located in the dynamic link library wlanapi.dll..
    >> >> A workaround is to use the pre-SP3 version of wlanapi.dll and place it in the appropriate directories. Upon loading, this version of the file will be used instead of the version in the System32 directory.
    >> >>
    >> >> xcopy %Windir%\$NtServicePackUninstall$\wlanapi.dll "%ProgramFiles%\D-Link\AirPlus G"
    >> >> xcopy %Windir%\$NtServicePackUninstall$\wlanapi.dll "%ProgramFiles%\ANI\ANIWZCS2"
    >> >>
    >> >>
    >> >>
    >> >>

    >> --
    >>
    >> Barb Bowman
    >> MS-MVP
    >> http://www.microsoft.com/windowsxp/e...ts/bowman.mspx
    >> http://blogs.digitalmediaphile.com/barb/
    >>

    --

    Barb Bowman
    MS-MVP
    http://www.microsoft.com/windowsxp/e...ts/bowman.mspx
    http://blogs.digitalmediaphile.com/barb/

  12. #12
    turfsurf
    Guest

    DLink GWL-G630 Entry Point Problem - wlanapi.dll

    "...could not be located in the dynamic link library wlanapi.dll"
    I had this same problem after upgrading to sp3.I have a D-Link AirPlus G DWL-G510 Wireless pci adapter.(DESKTOP PC)
    A very simple fix is to:

    1.Boot in safemode with networking (F8 on start up)
    2.Go to C:\WINDOWS\system32
    3.You will probably find two "wlanapi.dll"
    that is: wlanapi.dll and wlanapi(2).dll
    4.wlanapi(2).dll is from sp3 (didn't overwrite
    previous one.)
    5.Delete wlanapi.dll and rename wlanapi(2).dll to
    wlanapi.dll and reboot.
    6.Worked fine for me


  13. #13
    Pavel A.
    Guest

    Re: DLink GWL-G630 Entry Point Problem - wlanapi.dll

    Get the SP3 compatible update for your D-Link software/driver.
    For details, search archive of this NG, this has been already discussed
    here.

    Regards,
    --PA

    turfsurf wrote:
    > "...could not be located in the dynamic link library wlanapi.dll"
    > I had this same problem after upgrading to sp3.I have a D-Link AirPlus G DWL-G510 Wireless pci adapter.(DESKTOP PC)
    > A very simple fix is to:
    >
    > 1.Boot in safemode with networking (F8 on start up)
    > 2.Go to C:\WINDOWS\system32
    > 3.You will probably find two "wlanapi.dll"
    > that is: wlanapi.dll and wlanapi(2).dll
    > 4.wlanapi(2).dll is from sp3 (didn't overwrite
    > previous one.)
    > 5.Delete wlanapi.dll and rename wlanapi(2).dll to
    > wlanapi.dll and reboot.
    > 6.Worked fine for me
    >


  14. #14
    =?Utf-8?B?bGV5bGFuZA==?=
    Guest

    RE: DLink GWL-G630 Entry Point Problem - wlanapi.dll



    "Duckysan1" wrote:

    > Since upgrading my Acer laptop (Travelmate 2300) to XP SP3, I cannot use the
    > Dlink utility. I receive the following error:
    >
    > 'The procedure entry point apsGetInterfaceCount could not be located in the
    > dynamic link library wlanapi.dll'
    > I have removed and re-installed the drivers/software, but no improvement.
    > Web search suggests compatibility problem with Dlink driver/dll.
    > Whilst I still have wireless connectivity, the Dlink utilities do not work.
    > It seems this is an SP3 issue - other users report the issue is resolved if
    > they revert back to SP2.
    > There must be a better resolution!
    >


  15. #15
    =?Utf-8?B?bGV5bGFuZA==?=
    Guest

    RE: DLink GWL-G630 Entry Point Problem - wlanapi.dll


    On booting up I am shown the WZCSLDR2/WLANAPI.DlL/apsGetReady. I've tride to
    remove this no joy. I then discover that there are spyware companies claiming
    to be able to remove this, of course for a fee. Do these work ?.
    Just what is Windows doing to resolve this problem. Are they working on this
    as we speak. Come on Windows you must be aware of this problem, give us an
    answer.


  16. #16
    R. McCarty
    Guest

    Re: DLink GWL-G630 Entry Point Problem - wlanapi.dll

    Not a Windows/Microsoft issue at all. You have a support applet for
    a Wireless card that is attempting to start at boot. Either the .Dll is not
    found or the registration for it is missing/incorrect.
    Several options - either use Windows Native Wireless to control the
    device or check your card's vendor website for an updated driver &
    support applet.

    "leyland" <leyland@discussions.microsoft.com> wrote in message
    news:6A055AA6-96CD-454D-96AC-87F91CFD3CAE@microsoft.com...
    >
    > On booting up I am shown the WZCSLDR2/WLANAPI.DlL/apsGetReady. I've tride
    > to
    > remove this no joy. I then discover that there are spyware companies
    > claiming
    > to be able to remove this, of course for a fee. Do these work ?.
    > Just what is Windows doing to resolve this problem. Are they working on
    > this
    > as we speak. Come on Windows you must be aware of this problem, give us an
    > answer.
    >




  17. #17
    Richard in AZ
    Guest

    Re: DLink GWL-G630 Entry Point Problem - wlanapi.dll

    Actually it is a Microsoft/Windows issue. They rewrote a dll file, that Dlink was using, with the
    issue of SP3.
    The new dll file is not compatible with the DLink drivers.
    However DLink should now have a patch, or new driver, for their card. But seems they don't care
    about some older cards.
    Going to "msconfig" and turning off the DLink monitoring software stops the nag window and does not
    stop the card operation.

    "R. McCarty" <PcEngWork-NoSpam_@mindspring.com> wrote in message
    news:eiGC%23TwTJHA.1184@TK2MSFTNGP03.phx.gbl...
    | Not a Windows/Microsoft issue at all. You have a support applet for
    | a Wireless card that is attempting to start at boot. Either the .Dll is not
    | found or the registration for it is missing/incorrect.
    | Several options - either use Windows Native Wireless to control the
    | device or check your card's vendor website for an updated driver &
    | support applet.
    |
    | "leyland" <leyland@discussions.microsoft.com> wrote in message
    | news:6A055AA6-96CD-454D-96AC-87F91CFD3CAE@microsoft.com...
    | >
    | > On booting up I am shown the WZCSLDR2/WLANAPI.DlL/apsGetReady. I've tride
    | > to
    | > remove this no joy. I then discover that there are spyware companies
    | > claiming
    | > to be able to remove this, of course for a fee. Do these work ?.
    | > Just what is Windows doing to resolve this problem. Are they working on
    | > this
    | > as we speak. Come on Windows you must be aware of this problem, give us an
    | > answer.
    | >
    |
    |



  18. #18
    R. McCarty
    Guest

    Re: DLink GWL-G630 Entry Point Problem - wlanapi.dll

    Thanks for the additional info, wasn't aware of the circumstances of the
    ..Dll.

    "Richard in AZ" <me@mailinator.com> wrote in message
    news:OR5sbxwTJHA.4504@TK2MSFTNGP02.phx.gbl...
    > Actually it is a Microsoft/Windows issue. They rewrote a dll file, that
    > Dlink was using, with the
    > issue of SP3.
    > The new dll file is not compatible with the DLink drivers.
    > However DLink should now have a patch, or new driver, for their card. But
    > seems they don't care
    > about some older cards.
    > Going to "msconfig" and turning off the DLink monitoring software stops
    > the nag window and does not
    > stop the card operation.
    >
    > "R. McCarty" <PcEngWork-NoSpam_@mindspring.com> wrote in message
    > news:eiGC%23TwTJHA.1184@TK2MSFTNGP03.phx.gbl...
    > | Not a Windows/Microsoft issue at all. You have a support applet for
    > | a Wireless card that is attempting to start at boot. Either the .Dll is
    > not
    > | found or the registration for it is missing/incorrect.
    > | Several options - either use Windows Native Wireless to control the
    > | device or check your card's vendor website for an updated driver &
    > | support applet.
    > |
    > | "leyland" <leyland@discussions.microsoft.com> wrote in message
    > | news:6A055AA6-96CD-454D-96AC-87F91CFD3CAE@microsoft.com...
    > | >
    > | > On booting up I am shown the WZCSLDR2/WLANAPI.DlL/apsGetReady. I've
    > tride
    > | > to
    > | > remove this no joy. I then discover that there are spyware companies
    > | > claiming
    > | > to be able to remove this, of course for a fee. Do these work ?.
    > | > Just what is Windows doing to resolve this problem. Are they working
    > on
    > | > this
    > | > as we speak. Come on Windows you must be aware of this problem, give
    > us an
    > | > answer.
    > | >
    > |
    > |
    >
    >




  19. #19
    Kelly
    Guest

    Re: DLink GWL-G630 Entry Point Problem - wlanapi.dll

    > SP3

    Beta tester are you? <eg>

    --

    All the Best and Happy Turkey Day,
    Kelly (MS-MVP/DTS&XP)

    Taskbar Repair Tool Plus!
    http://www.kellys-korner-xp.com/taskbarplus!.htm


    "leyland" <leyland@discussions.microsoft.com> wrote in message
    news:3310C5E5-4C95-4E89-837C-7BA215F73586@microsoft.com...
    >
    >
    > "Duckysan1" wrote:
    >
    >> Since upgrading my Acer laptop (Travelmate 2300) to XP SP3, I cannot use
    >> the
    >> Dlink utility. I receive the following error:
    >>
    >> 'The procedure entry point apsGetInterfaceCount could not be located in
    >> the
    >> dynamic link library wlanapi.dll'
    >> I have removed and re-installed the drivers/software, but no
    >> improvement.
    >> Web search suggests compatibility problem with Dlink driver/dll.
    >> Whilst I still have wireless connectivity, the Dlink utilities do not
    >> work.
    >> It seems this is an SP3 issue - other users report the issue is resolved
    >> if
    >> they revert back to SP2.
    >> There must be a better resolution!
    >>



  20. #20
    =?Utf-8?B?bGV5bGFuZA==?=
    Guest

    Re: DLink GWL-G630 Entry Point Problem - wlanapi.dll



    > > |
    > > | "leyland" <leyland@discussions.microsoft.com> wrote in message
    > > | news:6A055AA6-96CD-454D-96AC-87F91CFD3CAE@microsoft.com...
    > > | >
    > > | > On booting up I am shown the WZCSLDR2/WLANAPI.DlL/apsGetReady. I've
    > > tride
    > > | > to
    > > | > remove this no joy. I then discover that there are spyware companies
    > > | > claiming
    > > | > to be able to remove this, of course for a fee. Do these work ?.
    > > | > Just what is Windows doing to resolve this problem. Are they working
    > > on
    > > | > this
    > > | > as we speak. Come on Windows you must be aware of this problem, give
    > > us an
    > > | > answer.
    > > | >
    > > |
    > > |
    > >
    > >

    >
    >
    >


Similar Threads

  1. network problem.. could it be virus attack?
    By maxchock in forum Networking Forum
    Replies: 0
    Last Post: 10-04-08, 05:18 AM
  2. Re: Odd problem: Belkin N1 access point, connected to our businessswitch, slows the net
    By smlunatick in forum ms.public.windows.networking.wireless
    Replies: 3
    Last Post: 04-11-08, 09:28 AM
  3. Replies: 0
    Last Post: 10-14-07, 01:33 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •