Results 1 to 5 of 5

Thread: NETGEAR WPN824v3 port forwarding problems

  1. #1
    Norman Peelman
    Guest

    NETGEAR WPN824v3 port forwarding problems

    My netgear router won't allow me to access my WAN ip (ISP provided)
    address from inside the LAN. I have a web server running on 192.168.1.5
    and port forwarding set to forward HTTP traffic to that ip. Outside
    access works fine but if I try to access the server (or FTP, etc) from
    inside the LAN I am shown the router login prompt in which case I can
    either log in to the router or cancel out which results in a 401
    Unauthorized Your client does not have permission to get URL
    /cgi-bin/check_hijack.html from this server. The url bar in firefox says:

    http://www.myserver.com/cgi-bin/check_hijack.html

    obviously the latter part of that url is for the (located on) router but
    why would be trying to get it from my server if I don't authenticate.
    Further, even if I type in:

    http://my.ip.add.here (the address assigned by my ISP) it still does the
    same thing?

    Since outside access works as expected, I know the port forwarding is
    really working... something seems hosed on the LAN side...



    --
    Norman
    Registered Linux user #461062

  2. #2
    Junior Member
    Join Date
    Dec 2008
    Posts
    1

    Netgear WNR2000 - Port Forwarding Problems

    I have the same problem with my Netgear WNR2000 wireless/wired router. I've been swapping e-mails with Netgear Tech Support since 11/23/2000 and still haven't come up with an answer. I sure hope we find a solution soon. I host websites and maintain them. It's a bit hard writing code when you can't see the results from inside the network.

  3. #3
    Junior Member
    Join Date
    Feb 2009
    Posts
    1
    I'm having the same issue with a WPN824v3, firmware v. V1.0.7_1.0.8NA. Were you ever able to find a solution to this problem?

  4. #4
    Norman Peelman
    Guest

    Re: NETGEAR WPN824v3 port forwarding problems

    ayukawa wrote:
    > I'm having the same issue with a WPN824v3, firmware v. V1.0.7_1.0.8NA.
    > Were you ever able to find a solution to this problem?
    >
    >


    No, only workaround is to set entries in your hosts (linux .hosts) file
    to point to your server.


    --
    Norman
    Registered Linux user #461062

  5. #5
    1PW
    Guest

    Re: NETGEAR WPN824v3 port forwarding problems

    On 02/26/2009 04:27 PM, ayukawa sent:
    > I'm having the same issue with a WPN824v3, firmware v. V1.0.7_1.0.8NA.
    > Were you ever able to find a solution to this problem?


    Hello

    Your speedguide.net forum has seen fit to crosspost to the
    alt.comp.networking.routers newsgroup without the slightest clue what
    was in the original thread.

    Please repost with your own detailed description of your own router's
    problem.

    Thank you.

    Pete
    --
    1PW @?6A62?FEH9:DE=6o2@=]4@> [r4o7t]

Similar Threads

  1. Double Routers & Port Forwarding
    By herovijay in forum Wireless Networks & Routers
    Replies: 2
    Last Post: 01-21-08, 09:35 AM
  2. Netgear WGR614v6 + Microcom 2636 port forwarding nightmare!
    By indiejAthensGR in forum Wireless Networks & Routers
    Replies: 1
    Last Post: 03-12-07, 07:10 PM
  3. Cisco and Port Forwarding
    By jstaley in forum Networking Forum
    Replies: 3
    Last Post: 02-25-07, 04:35 PM
  4. Port Forwarding with Sunrocket Problems
    By garaxiel in forum General Discussion Board
    Replies: 4
    Last Post: 01-16-07, 03:31 PM
  5. Need help with port forwarding
    By kevinmcn in forum Wireless Networks & Routers
    Replies: 0
    Last Post: 01-09-07, 02:44 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •