Results 1 to 2 of 2

Thread: need help

  1. #1
    wallahham
    Guest

    need help

    dear friends
    i have belkin model f5d1632-4 i cant access its main page at
    192.168.2.1
    i tried to reset it several times noting
    in the lan connection "ie every thing in auto in tcip properties"
    it dont take an ip it takes virtual ip in autoconfigaring ip4 like
    169.254.157.242
    i think the main proplem that i cant access the main page at
    192.168.2.1
    can any one help

  2. #2
    GlowingBlueMist
    Guest

    Re: need help

    "wallahham" <waellhm@gmail.com> wrote in message
    news:fc0bf007-d1fc-4143-97db-0205fb15ef15@s50g2000hsb.googlegroups.com...
    > dear friends
    > i have belkin model f5d1632-4 i cant access its main page at
    > 192.168.2.1
    > i tried to reset it several times noting
    > in the lan connection "ie every thing in auto in tcip properties"
    > it dont take an ip it takes virtual ip in autoconfigaring ip4 like
    > 169.254.157.242
    > i think the main proplem that i cant access the main page at
    > 192.168.2.1
    > can any one help

    If your pc is reporting it's IP address as starting with 169 then your PC is
    not getting an IP address from the router.

    You may have a bad or wrong (x-over instead of a straight through) IP cable
    or some other problem. Some PC's need to be assigned a fixed IP in the
    192.168.2.xxx range and have the default gateway set to 192.168.2.1 in
    order to make contact built in web pages.

    The following link is from the Belkin help section. While the router used
    in the example is not the same as yours (which was not listed when I
    searched Belkin's help section) it should be able to get you working.

    http://www.belkin.com/support/articl...=2440&scid=221



Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •