Results 1 to 6 of 6

Thread: Connecting Buffalo NAS wirelessly

  1. #1
    F
    Guest

    Connecting Buffalo NAS wirelessly

    I've just got a 'Buffalo LinkStation' and a 'Belkin F5D7132 Wireless G
    Universal Range Extender' to add to my network.

    The existing network consists of a '3Com OfficeConnect ADSL Wireless 11g
    Firewall Router 3CRWE754G72-A' which connects to my Windows computer
    using Cat 5 and to my laptop and PDA using the wireless connection. This
    basic network, with MAC address filtering and 64-bit WEP encryption,
    works fine over both the Cat 5 and wireless.

    I have got the LinkStation plugged into the Belkin with the supplied Cat
    5 cable and have got the Belkin set up as a what Belkin describe as a
    'Wireless Range Extender'. I've given both the Buffalo and the Belkin
    fixed IP addresses (192.168.1.12 and 192.168.1.15). Set up like this I
    can connect to the Buffalo wirelessly and transfer files. I have added
    MAC address filtering to the Belkin and the 3Com and, again, can
    transfer files wirelessly.

    However, once I add 64-bit WEP encryption (only 64-bit WEP as my PDA has
    nothing stronger) to the 3Com and Belkin they fail to connect and the
    Belkin's red 'Searching' LED flashes continuously.

    After all that, can anyone explain (in nice easy words please) what I
    need to do to add 64-bit WEP encryption back into the network please?

    TIA

    --
    F

    (Beware of spam trap - remove the negative)

  2. #2
    F
    Guest

    Re: Connecting Buffalo NAS wirelessly

    On 10/03/2008 13:54 F wrote:

    > The existing network consists of a '3Com OfficeConnect ADSL Wireless 11g
    > Firewall Router 3CRWE754G72-A' which connects to my Windows computer
    > using Cat 5 and to my laptop


    Just in case it's relevant, that should have been 'Windows Vista Home
    Premium computer' and 'Windows XP Home laptop'

    --
    F

    (Beware of spam trap - remove the negative)



  3. #3
    Peter Pan
    Guest

    Re: Connecting Buffalo NAS wirelessly

    F wrote:
    > I've just got a 'Buffalo LinkStation' and a 'Belkin F5D7132 Wireless G
    > Universal Range Extender' to add to my network.
    >
    > The existing network consists of a '3Com OfficeConnect ADSL Wireless
    > 11g Firewall Router 3CRWE754G72-A' which connects to my Windows
    > computer using Cat 5 and to my laptop and PDA using the wireless
    > connection. This basic network, with MAC address filtering and 64-bit
    > WEP encryption, works fine over both the Cat 5 and wireless.
    >
    > I have got the LinkStation plugged into the Belkin with the supplied
    > Cat 5 cable and have got the Belkin set up as a what Belkin describe
    > as a 'Wireless Range Extender'. I've given both the Buffalo and the
    > Belkin fixed IP addresses (192.168.1.12 and 192.168.1.15). Set up
    > like this I can connect to the Buffalo wirelessly and transfer files.
    > I have added MAC address filtering to the Belkin and the 3Com and,
    > again, can transfer files wirelessly.
    >
    > However, once I add 64-bit WEP encryption (only 64-bit WEP as my PDA
    > has nothing stronger) to the 3Com and Belkin they fail to connect and
    > the Belkin's red 'Searching' LED flashes continuously.
    >
    > After all that, can anyone explain (in nice easy words please) what I
    > need to do to add 64-bit WEP encryption back into the network please?
    >
    > TIA


    Try using the hex value for the key (my pda converts ascii different than my
    laptop, so I just use the hex representation now), and for now, turn off the
    mac address filter (you didn't say if you added the pda's mac adress too,
    just the belkin and 3com)



  4. #4
    F
    Guest

    Re: Connecting Buffalo NAS wirelessly

    On 10/03/2008 15:23 Peter Pan wrote:

    > Try using the hex value for the key


    Done that but access still fails.

    > (you didn't say if you added the pda's mac adress too,
    > just the belkin and 3com)


    I've entered the MAC address of anything and everything I've got into
    both the Belkin and 3Com, but I can try turning it off when I get back
    to it later.

    Thanks for the suggestions.

    --
    F

    (Beware of spam trap - remove the negative)


  5. #5
    Peter Pan
    Guest

    Re: Connecting Buffalo NAS wirelessly

    F wrote:
    > On 10/03/2008 15:23 Peter Pan wrote:
    >
    >> Try using the hex value for the key

    >
    > Done that but access still fails.
    >
    >> (you didn't say if you added the pda's mac adress too,
    >> just the belkin and 3com)

    >
    > I've entered the MAC address of anything and everything I've got into
    > both the Belkin and 3Com, but I can try turning it off when I get back
    > to it later.
    >
    > Thanks for the suggestions.


    Just out of curiosity, have you tried turning off the range extender? as
    long as you are doing the wep turn off, can you try that too? (PS does the
    PDA access the original wap's ssid or the range extenders? (some range
    extenders work sort of funny, for debugging I just play george jetson and
    turn everything off, and then turn things back on one by one till they fail)

    Another oddity, while I have the stuff set for a longer wep phrase (6 ascii
    characters in the wap/router), mine only looks like it only actually takes 5
    characters/10 Hex Charcters... On my wap/router i put in 6 characters for a
    wep key, but on the PDA I only have 5 (10 as hex stuff) Maybe the PDA in
    actuality only supports 40 bit? (my ipaq and dell only did that)... As an
    aside, I forget which pda you said you had, but there are programs ut there
    that support WPA (I used to do that until I added Tivo's that only support
    WEP, so I had to dial it back)



  6. #6
    F
    Guest

    Re: Connecting Buffalo NAS wirelessly

    On 10/03/2008 18:44 Peter Pan wrote:

    > Just out of curiosity, have you tried turning off the range extender? as
    > long as you are doing the wep turn off, can you try that too?


    Turned the Belkin off and set the encryption on the 3Com. Plugged a Cat
    5 cable into the Belkin and turned it on. Set the encryption and my PDA
    will connect through it. Remove the Cat 5 cable and the connection is
    lost. It looks like the PDA will connect wirelessly to the Belkin and
    then onto the 3Com through the cable. Remove the cable and it seems that
    the Belkin and 3Com won't connect using wireless. So it would appear
    that the encryption between 3Com and Belkin fails, although PDA to 3Com
    and PDA to Belkin works using the same 64-bit WEP hex.

    The laptop, on the other hand, will connect to the Belkin with
    encryption enabled (well it says 'Connected' the 'Choose a wireless
    network' screen) but there's no connection through the 3Com router to
    the rest of the network with or without the Cat 5 cable connected to the
    Belkin.

    > (PS does the
    > PDA access the original wap's ssid or the range extenders?


    I think my mention of the PDA might have introduced some confusion here.
    It's the connection between the 3Com router and the Belkin range
    extender that fails when I set up the encryption. However, the PDA does
    connect wirelessly through the Belkin as long as the 64-bit WEP is off.

    > Another oddity, while I have the stuff set for a longer wep phrase (6 ascii
    > characters in the wap/router), mine only looks like it only actually takes 5
    > characters/10 Hex Charcters... On my wap/router i put in 6 characters for a
    > wep key, but on the PDA I only have 5 (10 as hex stuff) Maybe the PDA in
    > actuality only supports 40 bit? (my ipaq and dell only did that)... As an
    > aside, I forget which pda you said you had, but there are programs ut there
    > that support WPA (I used to do that until I added Tivo's that only support
    > WEP, so I had to dial it back)


    Thanks, I'll have a look at that once I get the 3Com/Belkin connection
    sorted. The hex that I have used to try to connect the 3Com router and
    Belkin is 10 characters long and works between the 3Com, the laptop and
    the PDA. The Belkin setup screen also needs 10 characters so I suspect
    the problem isn't there.

    I thought 'they' had made wireless setup easy!

    --
    F

    (Beware of spam trap - remove the negative)


Similar Threads

  1. Faster NAS access help
    By batman129 in forum Networking Forum
    Replies: 0
    Last Post: 03-10-07, 08:30 PM
  2. Buffalo
    By jmaldonado5 in forum Wireless Networks & Routers
    Replies: 1
    Last Post: 01-25-07, 02:49 PM
  3. Help connecting two buildings wirelessly to make one big wireless LAN
    By littlebeartoe in forum Wireless Networks & Routers
    Replies: 3
    Last Post: 01-08-07, 01:03 PM
  4. Anyone fiddled with..oh, lower to midrange NAS boxes?
    By YeOldeStonecat in forum Hardware & Overclocking
    Replies: 6
    Last Post: 12-01-05, 12:11 PM
  5. I see they still haven't fixed it yet
    By Sid in forum Distributed Computing
    Replies: 20
    Last Post: 03-20-05, 08:30 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •