Reply With QuoteWell If the timings on the value select are higher than the other corsair stick then you need to raise the timings in the bios.
I was wondering if I added an additional 1 GB PC3200 DDR400 P/N: VS512MB400 to my existing 1 GB Corsair CMX512-3200C2 how it would run. The added memory is value select.
Thoughts?
"We do not inherit the Earth from our parents, we borrow it from our children."
Asus P5Q-E LGA 775 / Intel Core 2 Duo E8500 Wolfdale / Artic Cooling Freezer 7 Pro / NVIDIA GTX650 Ti Boost / Corsair Dominator 8GB DDR2 1066 (PC2 8500) / Corsair CMPSU-650TX / Asus 20X DRW-2014L1T / Klipsch 4.1 / Creative Sound Blaster Z / Crucial MX100 CT512MX100SSD1 2.5" 512GB SATA III MLC Internal Solid State Drive / Too many hard drives to mention.....
Well If the timings on the value select are higher than the other corsair stick then you need to raise the timings in the bios.
Since it's value select, I'm guessing it will probably have to get cranked up a tad. Does it effect the dual channel settings with 4 512's instead of 2 ?
"We do not inherit the Earth from our parents, we borrow it from our children."
Asus P5Q-E LGA 775 / Intel Core 2 Duo E8500 Wolfdale / Artic Cooling Freezer 7 Pro / NVIDIA GTX650 Ti Boost / Corsair Dominator 8GB DDR2 1066 (PC2 8500) / Corsair CMPSU-650TX / Asus 20X DRW-2014L1T / Klipsch 4.1 / Creative Sound Blaster Z / Crucial MX100 CT512MX100SSD1 2.5" 512GB SATA III MLC Internal Solid State Drive / Too many hard drives to mention.....
It might default to a lower speed with all 4 slots filled. Check your manual.
Posting Permissions
Bookmarks