Page 1 of 2 12 LastLast
Results 1 to 20 of 27

Thread: Server issues today

  1. #1
    Administrator Philip's Avatar
    Join Date
    May 1999
    Location
    Jacksonville, Florida, United States
    Posts
    10,343
    Blog Entries
    6

    Server issues today

    The server shut down for no apparent reason a couple of hours ago, and it wouldn't post at all. It would boot for about 5 seconds without video coming up or any other indication, and it would shut down on its own.

    I drove down to the NOC and was only able to bring it up after removing a couple of RAM sticks. I switched the 3rd and 4th Gb sticks, reseated everything, ran Memtest for about 30 min with no errors.

    At this point it's running as it was, with all 4 GB RAM in it. I'm just glad it is close so I could get to it, and that I was able to bring it back up.

    The downside is I am not 100% positive what the exact issue was. Hopefully it was a temporary glitch and it wont happen again.

    Why is it things like that always happen on long weekends ? Argh.

    Anyway, back up and running, just got back from the NOC. I'll run some more tests as I can remotely.

    Please excuse any inconvenience this downtime may have caused.

  2. #2
    Ohh Hell yeah.. Sava700's Avatar
    Join Date
    Feb 2002
    Location
    Somewhere
    Posts
    24,052
    Hell yeah.. I was like WTF I can't get into Speedguide.. I started to Drink alot of Moonshine cause I was loosing my mind.. thank God its back up!!!!!!!!!

  3. #3
    Second Most EVIL YARDofSTUF's Avatar
    Join Date
    Nov 2000
    Location
    USA
    Posts
    69,982
    It always happens that way. Its like the neat case disease. you organize all the cables and setup all the front panel connectors, lights, every option, and the damn thing doesnt post. Then you unplug it all and just throw it on over the top and plug it in in a total mess and it runs stable as anything.

  4. #4
    Moderator John's Avatar
    Join Date
    Dec 1999
    Posts
    1,682
    Quote Originally Posted by YARDofSTUF View Post
    It always happens that way. Its like the neat case disease. you organize all the cables and setup all the front panel connectors, lights, every option, and the damn thing doesnt post. Then you unplug it all and just throw it on over the top and plug it in in a total mess and it runs stable as anything.



    Yeah I always got a higher stable OC when the guts were laid out on the mobo box LOL

  5. #5
    Second Most EVIL YARDofSTUF's Avatar
    Join Date
    Nov 2000
    Location
    USA
    Posts
    69,982
    Quote Originally Posted by John View Post
    Yeah I always got a higher stable OC when the guts were laid out on the mobo box LOL
    Is that against NOC policy?

  6. #6
    Administrator Philip's Avatar
    Join Date
    May 1999
    Location
    Jacksonville, Florida, United States
    Posts
    10,343
    Blog Entries
    6
    NOC policy ? Hey, it's our server, we can get electrecuted anytime we feel like it. Seriously though, I had it up and running while poking around today.
    Linux is user friendly, it's just picky about its friends...
    Disclaimer: Please use caution when opening messages, my grasp on reality may have shaken loose during transmission (going on rusty memory circuits).
    ๑۩۞۩๑

  7. #7
    Elite Member TonyT's Avatar
    Join Date
    Jan 2000
    Location
    Fairfax, VA
    Posts
    10,336
    The downside is I am not 100% positive what the exact issue was. Hopefully it was a temporary glitch and it wont happen again
    /var/log/* turn up anything? There may be something unusual in /dmesg. Which kernel is it running?
    No one has any right to force data on you
    and command you to believe it or else.
    If it is not true for you, it isn't true.

    LRH

  8. #8
    ♫♪ ♫♪ ♫♪ ♫♪ downhill's Avatar
    Join Date
    Jan 2000
    Location
    My Own Private Idaho
    Posts
    34,796
    The good news is that it's at least close enough for you to trouble shoot it.

    Seems running as fast as it did before from my end.

  9. #9
    Administrator Philip's Avatar
    Join Date
    May 1999
    Location
    Jacksonville, Florida, United States
    Posts
    10,343
    Blog Entries
    6
    No logged errors whatsoever TonyT. Kernel is 2.6.18. I'm using the PAE variation, since without it only ~3.6GB RAM are usable.

    My reasoning is, if it was a kernel panic or some software issue, it should've posted when they tried rebooting it. It wasn't posting, it was just shutting down before even bringing up the bios. The fans were spinning up, leds were flashing, for about 5 seconds. When I opened the case, the only notable thing was some LED display on the MoBo, showing these codes: 87... then flashed through 44, 28, FF, and back to 87. That's all it was doing, then shutting down. I haven't even been able to find out what those codes mean yet, there is nothing in the manual. The server model is Tyan GT24 (B2891), the MoBo is Tyan Thunder K8SSRE.

    I'm just hoping it was just bad connection on one of the RAM modules...


    Here is a dmesg dump (just the RAID array reconstructing, which is understandable after the repeated reboots and parts-pulling I suppose):
    Linux version 2.6.18-1.2849.fc6PAE (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Fri Nov 10 13:27:10 EST 2006
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 0000000000096c00 (usable)
    BIOS-e820: 0000000000096c00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000c2000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000cff20000 (usable)
    BIOS-e820: 00000000cff20000 - 00000000cff25000 (ACPI data)
    BIOS-e820: 00000000cff25000 - 00000000cff80000 (ACPI NVS)
    BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
    3968MB HIGHMEM available.
    896MB LOWMEM available.
    found SMP MP-table at 000f71c0
    NX (Execute Disable) protection: active
    On node 0 totalpages: 1245184
    DMA zone: 4096 pages, LIFO batch:0
    Normal zone: 225280 pages, LIFO batch:31
    HighMem zone: 1015808 pages, LIFO batch:31
    DMI present.
    Using APIC driver default
    IO/L-APIC allowed because system is MP or new enough
    ACPI: RSDP (v000 PTLTD ) @ 0x000f7190
    ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0xcff21536
    ACPI: FADT (v001 NVIDIA CK8S 0x06040000 PTL_ 0x000f4240) @ 0xcff24d72
    ACPI: SRAT (v001 AMD HAMMER 0x06040000 AMD 0x00000001) @ 0xcff24de6
    ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0xcff24ef6
    ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0xcff24f46
    ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0xcff24fd8
    ACPI: DSDT (v001 NVIDIA CK8 0x06040000 MSFT 0x0100000e) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x8008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 15:1 APIC version 16
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Processor #1 15:1 APIC version 16
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    Processor #2 15:1 APIC version 16
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
    Processor #3 15:1 APIC version 16
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    ACPI: IOAPIC (id[0x03] address[0xdf200000] gsi_base[24])
    IOAPIC[1]: apic_id 3, version 17, address 0xdf200000, GSI 24-27
    ACPI: IOAPIC (id[0x04] address[0xdf201000] gsi_base[28])
    IOAPIC[2]: apic_id 4, version 17, address 0xdf201000, GSI 28-31
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 3 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
    Detected 2009.406 MHz processor.
    Built 1 zonelists. Total pages: 1245184
    Kernel command line: ro root=/dev/md1
    mapped APIC to ffffd000 (fee00000)
    mapped IOAPIC to ffffc000 (fec00000)
    mapped IOAPIC to ffffb000 (df200000)
    mapped IOAPIC to ffffa000 (df201000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    CPU 0 irqstacks, hard=c07ae000 soft=c078e000
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 4146268k/4980736k available (2136k kernel code, 45900k reserved, 865k data, 244k init, 3275904k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 4019.77 BogoMIPS (lpj=2009888)
    Security Framework v1.0.0 initialized
    SELinux: Initializing.
    SELinux: Starting in permissive mode
    selinux_register_security: Registering secondary module capability
    Capability LSM initialized as secondary
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
    CPU: After vendor identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    CPU 0(2) -> Core 0
    CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    ACPI: Core revision 20060707
    CPU0: AMD Dual Core AMD Opteron(tm) Processor 270 stepping 02
    SMP alternatives: switching to SMP code
    Booting processor 1/1 eip 3000
    CPU 1 irqstacks, hard=c07af000 soft=c078f000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 4017.95 BogoMIPS (lpj=2008978)
    CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
    CPU: After vendor identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    CPU 1(2) -> Core 1
    CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: AMD Dual Core AMD Opteron(tm) Processor 270 stepping 02
    SMP alternatives: switching to SMP code
    Booting processor 2/2 eip 3000
    CPU 2 irqstacks, hard=c07b0000 soft=c0790000
    Initializing CPU#2
    Calibrating delay using timer specific routine.. 4017.96 BogoMIPS (lpj=2008980)
    CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
    CPU: After vendor identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    CPU 2(2) -> Core 0
    CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#2.
    CPU2: AMD Dual Core AMD Opteron(tm) Processor 270 stepping 02
    SMP alternatives: switching to SMP code
    Booting processor 3/3 eip 3000
    CPU 3 irqstacks, hard=c07b1000 soft=c0791000
    Initializing CPU#3
    Calibrating delay using timer specific routine.. 4017.97 BogoMIPS (lpj=2008986)
    CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
    CPU: After vendor identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    CPU 3(2) -> Core 1
    CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#3.
    CPU3: AMD Dual Core AMD Opteron(tm) Processor 270 stepping 02
    Total of 4 processors activated (16073.66 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
    checking TSC synchronization across 4 CPUs: passed.
    Brought up 4 CPUs
    sizeof(vma)=88 bytes
    sizeof(page)=32 bytes
    sizeof(inode)=424 bytes
    sizeof(dentry)=148 bytes
    sizeof(ext3inode)=600 bytes
    sizeof(buffer_head)=52 bytes
    sizeof(skbuff)=172 bytes
    sizeof(task_struct)=1392 bytes
    migration_cost=1129
    checking if image is initramfs... it is
    Freeing initrd memory: 1579k freed
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd76f, last bus=10
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
    Boot video device is 0000:01:07.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
    ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0
    ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0
    ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0
    ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Root Bridge [PCI2] (0000:08)
    PCI: Probing PCI hardware (bus 08)
    ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PA._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PB._PRT]
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 14 devices
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    pnp: 00:07: ioport range 0x8000-0x807f could not be reserved
    pnp: 00:07: ioport range 0x8080-0x80ff has been reserved
    pnp: 00:07: ioport range 0x8400-0x847f has been reserved
    pnp: 00:07: ioport range 0x8480-0x84ff has been reserved
    pnp: 00:07: ioport range 0x8800-0x887f has been reserved
    pnp: 00:07: ioport range 0x8880-0x88ff has been reserved
    pnp: 00:07: ioport range 0x5000-0x503f has been reserved
    pnp: 00:07: ioport range 0x5040-0x507f has been reserved
    PCI: Bridge: 0000:00:09.0
    IO window: 2000-2fff
    MEM window: dd100000-deffffff
    PREFETCH window: d1000000-d10fffff
    PCI: Bridge: 0000:00:0e.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Setting latency timer of device 0000:00:09.0 to 64
    PCI: Setting latency timer of device 0000:00:0e.0 to 64
    PCI: Bridge: 0000:08:0a.0
    IO window: 3000-3fff
    MEM window: df300000-df3fffff
    PREFETCH window: d1100000-d11fffff
    PCI: Bridge: 0000:08:0b.0
    IO window: disabled.
    MEM window: df400000-df4fffff
    PREFETCH window: d1200000-d12fffff
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    Simple Boot Flag at 0x36 set to 0x1
    apm: BIOS not found.
    audit: initializing netlink socket (disabled)
    audit(1164570367.274:1): initialized
    highmem bounce pool size: 64 pages
    Total HugeTLB memory allocated, 0
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    SELinux: Registering netfilter hooks
    Initializing Cryptographic API
    ksign: Installing public key data
    Loading keyring
    - Added public key CA06D81CB13FD94
    - User ID: Red Hat, Inc. (Kernel Module GPG key)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for subordinate bus.
    PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for subordinate bus.
    PCI: Setting latency timer of device 0000:00:0e.0 to 64
    pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0e.0cie00]
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Real Time Clock Driver v1.12ac
    Non-volatile memory driver v1.2
    Linux agpgart interface v0.101 (c) Dave Jones
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
    NFORCE-CK804: chipset revision 162
    NFORCE-CK804: not 100% native mode: will probe irqs later
    NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
    ide0: BM-DMA at 0x1400-0x1407, BIOS settings: hdaio, hdbio
    ide1: BM-DMA at 0x1408-0x140f, BIOS settings: hdcio, hddMA
    Probing IDE interface ide0...
    Probing IDE interface ide1...
    hdd: CD-224E-N, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    Probing IDE interface ide0...
    ide-floppy driver 0.99.newide
    usbcore: registered new driver libusual
    usbcore: registered new driver hiddev
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    mice: PS/2 mouse device common for all mice
    md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
    md: bitmap version 4.39
    TCP bic registered
    Initializing IPsec netlink socket
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    powernow-k8: Found 4 Dual Core AMD Opteron(tm) Processor 270 processors (version 2.00.00)
    powernow-k8: MP systems not supported by PSB BIOS structure
    powernow-k8: MP systems not supported by PSB BIOS structure
    powernow-k8: MP systems not supported by PSB BIOS structure
    powernow-k8: MP systems not supported by PSB BIOS structure
    Using IPI No-Shortcut mode
    ACPI: (supports S0 S1 S4 S5)
    Time: acpi_pm clocksource has been installed.
    Freeing unused kernel memory: 244k freed
    Write protecting the kernel read-only data: 385k
    USB Universal Host Controller Interface driver v3.0
    ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 23 (level, high) -> IRQ 193
    PCI: Setting latency timer of device 0000:00:02.0 to 64
    ohci_hcd 0000:00:02.0: OHCI Host Controller
    ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
    ohci_hcd 0000:00:02.0: irq 193, io mem 0xdd000000
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 10 ports detected
    ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
    ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 22 (level, high) -> IRQ 201
    PCI: Setting latency timer of device 0000:00:02.1 to 64
    ehci_hcd 0000:00:02.1: EHCI Host Controller
    ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:02.1: debug port 1
    PCI: cache line size of 64 is not supported by device 0000:00:02.1
    ehci_hcd 0000:00:02.1: irq 201, io mem 0xdd001000
    ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 10 ports detected
    md: raid1 personality registered for level 1
    SCSI subsystem initialized
    ACPI: PCI Interrupt 0000:09:0a.0[A] -> GSI 26 (level, low) -> IRQ 209
    usb 1-2: new low speed USB device using ohci_hcd and address 2
    usb 1-2: configuration #1 chosen from 1 choice
    input: HID 1267:0103 as /class/input/input0
    input: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:02.0-2
    input: HID 1267:0103 as /class/input/input1
    input: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:02.0-2
    scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
    <Adaptec AIC7901 Ultra320 SCSI adapter>
    aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs

    Vendor: SEAGATE Model: ST373207LC Rev: 0004
    Type: Direct-Access ANSI SCSI revision: 03
    target0:0:0: asynchronous
    scsi0:A:0:0: Tagged Queuing enabled. Depth 4
    target0:0:0: Beginning Domain Validation
    target0:0:0: wide asynchronous
    target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RDSTRM RTI WRFLOW PCOMP (6.25 ns, offset 63)
    target0:0:0: Ending Domain Validation
    SCSI device sda: 143374744 512-byte hdwr sectors (73408 MB)
    sda: Write Protect is off
    sda: Mode Sense: ab 00 10 08
    SCSI device sda: drive cache: write back w/ FUA
    SCSI device sda: 143374744 512-byte hdwr sectors (73408 MB)
    sda: Write Protect is off
    sda: Mode Sense: ab 00 10 08
    SCSI device sda: drive cache: write back w/ FUA
    sda: sda1 sda2 sda3
    sd 0:0:0:0: Attached scsi disk sda
    Vendor: SEAGATE Model: ST373207LC Rev: 0004
    Type: Direct-Access ANSI SCSI revision: 03
    target0:0:3: asynchronous
    scsi0:A:3:0: Tagged Queuing enabled. Depth 4
    target0:0:3: Beginning Domain Validation
    target0:0:3: wide asynchronous
    target0:0:3: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RDSTRM RTI WRFLOW PCOMP (6.25 ns, offset 63)
    target0:0:3: Ending Domain Validation
    SCSI device sdb: 143374744 512-byte hdwr sectors (73408 MB)
    sdb: Write Protect is off
    sdb: Mode Sense: ab 00 10 08
    SCSI device sdb: drive cache: write back w/ FUA
    SCSI device sdb: 143374744 512-byte hdwr sectors (73408 MB)
    sdb: Write Protect is off
    sdb: Mode Sense: ab 00 10 08
    SCSI device sdb: drive cache: write back w/ FUA
    sdb: sdb1 sdb2 sdb3
    sd 0:0:3:0: Attached scsi disk sdb
    libata version 2.00 loaded.
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: considering sdb3 ...
    md: adding sdb3 ...
    md: sdb1 has different UUID to sdb3
    md: adding sda3 ...
    md: sda1 has different UUID to sdb3
    md: created md1
    md: bind<sda3>
    md: bind<sdb3>
    md: running: <sdb3><sda3>
    md: md1: raid array is not clean -- starting background reconstruction
    raid1: raid set md1 active with 2 out of 2 mirrors
    md: considering sdb1 ...
    md: syncing RAID array md1
    md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc.
    md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for reconstruction.
    md: using 128k window, over a total of 70557376 blocks.
    md: adding sdb1 ...
    md: adding sda1 ...
    md: created md0
    md: bind<sda1>
    md: bind<sdb1>
    md: running: <sdb1><sda1>
    raid1: raid set md0 active with 2 out of 2 mirrors
    md: ... autorun DONE.
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: Disabled at runtime.
    SELinux: Unregistering netfilter hooks
    audit(1164570389.981:2): selinux=0 auid=4294967295
    input: PC Speaker as /class/input/input2
    EDAC MC: Ver: 2.0.1 Nov 10 2006
    EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
    EDAC MC1: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:19.2
    tg3.c:v3.65 (August 07, 2006)
    ACPI: PCI Interrupt 0000:0a:09.0[A] -> GSI 28 (level, low) -> IRQ 217
    eth0: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:33:4b:2c
    eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
    eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
    ACPI: PCI Interrupt 0000:0a:09.1[B] -> GSI 29 (level, low) -> IRQ 225
    eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:33:4b:2d
    eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
    eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
    i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
    i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5040
    hdd: ATAPI 24X CD-ROM drive, 256kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sd 0:0:3:0: Attached scsi generic sg1 type 0
    floppy0: no floppy controllers found
    parport: PnPBIOS parport detected.
    parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
    lp0: using parport0 (interrupt-driven).
    lp0: console ready
    ACPI: Power Button (FF) [PWRF]
    ACPI: Power Button (CM) [PWRB]
    ibm_acpi: ec object not found
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
    device-mapper: multipath: version 1.0.4 loaded
    EXT3 FS on md1, internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on md0, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Adding 1020116k swap on /dev/sdb2. Priority:-1 extents:1 across:1020116k
    Adding 1020116k swap on /dev/sda2. Priority:-2 extents:1 across:1020116k

    The RAID 1 array shows up clean too:

    [root@sguide log]# mdadm --detail /dev/md0
    /dev/md0:
    Version : 00.90.03
    Creation Time : Tue Oct 24 14:38:21 2006
    Raid Level : raid1
    Array Size : 104320 (101.89 MiB 106.82 MB)
    Device Size : 104320 (101.89 MiB 106.82 MB)
    Raid Devices : 2
    Total Devices : 2
    Preferred Minor : 0
    Persistence : Superblock is persistent

    Update Time : Sun Nov 26 14:46:37 2006
    State : clean
    Active Devices : 2
    Working Devices : 2
    Failed Devices : 0
    Spare Devices : 0

    UUID : d25785e3:77e33d9a:37dec6e3:2a0717e8
    Events : 0.10

    Number Major Minor RaidDevice State
    0 8 1 0 active sync /dev/sda1
    1 8 17 1 active sync /dev/sdb1


    [root@sguide log]# mdadm --detail /dev/md1
    /dev/md1:
    Version : 00.90.03
    Creation Time : Tue Oct 24 14:37:26 2006
    Raid Level : raid1
    Array Size : 70557376 (67.29 GiB 72.25 GB)
    Device Size : 70557376 (67.29 GiB 72.25 GB)
    Raid Devices : 2
    Total Devices : 2
    Preferred Minor : 1
    Persistence : Superblock is persistent

    Update Time : Sun Nov 26 17:43:13 2006
    State : clean
    Active Devices : 2
    Working Devices : 2
    Failed Devices : 0
    Spare Devices : 0

    UUID : 7a78086a:92c261f4:d1beca4c:5f8dd6cc
    Events : 0.16

    Number Major Minor RaidDevice State
    0 8 3 0 active sync /dev/sda3
    1 8 19 1 active sync /dev/sdb3

  10. #10
    R.I.P. MissTynker2's Avatar
    Join Date
    Oct 2003
    Location
    Northern California
    Posts
    6,930
    Thanks for the update Philip...and for your time spent in correcting it. Now, how do we get that day off back for ya?
    Mystical Folding Minx

  11. #11
    Administrator Philip's Avatar
    Join Date
    May 1999
    Location
    Jacksonville, Florida, United States
    Posts
    10,343
    Blog Entries
    6
    That's what I'm here for

    Hmm... Here is an idea:

    Click on a banner a week, visit some site. Just don't overdo it, especially if you're not interested in it Repeated clicks from the same user in the same day can even have negative effect.

  12. #12
    R.I.P. MissTynker2's Avatar
    Join Date
    Oct 2003
    Location
    Northern California
    Posts
    6,930
    Quote Originally Posted by Philip View Post
    That's what I'm here for

    Hmm... Here is an idea:

    Click on a banner a week, visit some site. Just don't overdo it, especially if you're not interested in it Repeated clicks from the same user in the same day can even have negative effect.
    Ack!!!! Thanks for the reminder!! Premium Membership extended.
    Mystical Folding Minx

  13. #13
    A+, Security+, Mobility+ Shinobi's Avatar
    Join Date
    Jan 2001
    Location
    South Carolina
    Posts
    4,432
    Blog Entries
    1
    Philip, Man.. I tried to find any info on the LED display on the mobo..
    Found jack.. you think that Tyan would have a error code list.
    _______________________________________________
    Vendor neutral certified in IT Project Management, IT Security, Cisco Networking, Cisco Security, Wide Area Networks, IPv6, IT Hardware, Unix, Linux, and Windows server administration

  14. #14
    Tortoises R0cks :D Rivas's Avatar
    Join Date
    May 2002
    Location
    Canada
    Posts
    10,248
    Quote Originally Posted by Sava700 View Post
    Hell yeah.. I was like WTF I can't get into Speedguide.. I started to Drink alot of Moonshine cause I was loosing my mind.. thank God its back up!!!!!!!!!

    To be human is to choose.


    It is better to die on your feet
    than to live on your knees.

    - Emiliano Zapata

  15. #15
    Administrator Philip's Avatar
    Join Date
    May 1999
    Location
    Jacksonville, Florida, United States
    Posts
    10,343
    Blog Entries
    6
    Quote Originally Posted by Shinobi View Post
    Philip, Man.. I tried to find any info on the LED display on the mobo..
    Found jack.. you think that Tyan would have a error code list.
    It has a Phoenix BIOS... The Phoenix site has some codes, but I couldn't find anything useful. I may try giving Tyan a call tomorrow, when there's someone to answer the phone.

    Thanks for looking.

  16. #16
    Administrator Philip's Avatar
    Join Date
    May 1999
    Location
    Jacksonville, Florida, United States
    Posts
    10,343
    Blog Entries
    6
    Quote Originally Posted by MissTynker2 View Post
    Ack!!!! Thanks for the reminder!! Premium Membership extended.

    You didn't have to... Thanks for the support though, it's appreciated.

  17. #17
    A+, Security+, Mobility+ Shinobi's Avatar
    Join Date
    Jan 2001
    Location
    South Carolina
    Posts
    4,432
    Blog Entries
    1
    Quote Originally Posted by Philip View Post
    It has a Phoenix BIOS... The Phoenix site has some codes, but I couldn't find anything useful. I may try giving Tyan a call tomorrow, when there's someone to answer the phone.

    Thanks for looking.
    Hmm.. I haven't done any business with Tyan since socket 7 days..
    Hopefully their support is still good.

    Good Luck to you..
    _______________________________________________
    Vendor neutral certified in IT Project Management, IT Security, Cisco Networking, Cisco Security, Wide Area Networks, IPv6, IT Hardware, Unix, Linux, and Windows server administration

  18. #18
    Regular Member Craig321's Avatar
    Join Date
    Jan 2006
    Location
    UK
    Posts
    145
    Quote Originally Posted by Philip View Post
    The server shut down for no apparent reason a couple of hours ago, and it wouldn't post at all. It would boot for about 5 seconds without video coming up or any other indication, and it would shut down on its own.

    I drove down to the NOC and was only able to bring it up after removing a couple of RAM sticks. I switched the 3rd and 4th Gb sticks, reseated everything, ran Memtest for about 30 min with no errors.

    At this point it's running as it was, with all 4 GB RAM in it. I'm just glad it is close so I could get to it, and that I was able to bring it back up.

    The downside is I am not 100% positive what the exact issue was. Hopefully it was a temporary glitch and it wont happen again.

    Why is it things like that always happen on long weekends ? Argh.

    Anyway, back up and running, just got back from the NOC. I'll run some more tests as I can remotely.

    Please excuse any inconvenience this downtime may have caused.
    Maybe heat? Just a guess

  19. #19
    Administrator Philip's Avatar
    Join Date
    May 1999
    Location
    Jacksonville, Florida, United States
    Posts
    10,343
    Blog Entries
    6
    It has temperature monitoring/alarms. They're well within specs, and it would've logged something. The DC has some serious cooling in place, low humidity/dust/etc. (the CPU heatsinks were cold to the touch...)

    Here are the hdd temps since last boot, they actually go down with time:
    Nov 26 14:47:16 speedguide smartd[3036]: Device: /dev/sda, initial Temperature is 31 Celsius
    Nov 26 14:47:16 speedguide smartd[3036]: [trip Temperature is 68 Celsius]
    Nov 26 14:47:16 speedguide smartd[3036]: Device: /dev/sdb, initial Temperature is 32 Celsius
    Nov 26 14:47:16 speedguide smartd[3036]: [trip Temperature is 68 Celsius]
    ....
    Nov 26 15:17:16 speedguide smartd[3055]: Device: /dev/sda, Temperature changed -2 Celsius to 29 Celsius since last report
    Nov 26 23:17:16 speedguide smartd[3055]: Device: /dev/sda, Temperature changed -2 Celsius to 27 Celsius since last report
    I'll play some more with the lm_stats configuration tomorrow.

    I'm leaning more towards some RAM issue.

  20. #20
    Junior Member MadDoctor's Avatar
    Join Date
    Apr 2001
    Location
    Looks dark
    Posts
    0
    Can you guys use small words like: broke, don't work, bang, fire, smoke... stuff like that. I can't keep up.
    People will forget what you said... and people will forget what you did... but people will never forget how you made them feel.

Similar Threads

  1. Trouble sending results.
    By Humboldt in forum Distributed Computing
    Replies: 13
    Last Post: 02-11-06, 11:53 PM
  2. BF2 Read Me File
    By Illini25 in forum Gaming
    Replies: 10
    Last Post: 06-18-05, 07:58 PM
  3. BF2 demo readme file
    By Tpofa in forum Gaming
    Replies: 1
    Last Post: 06-10-05, 05:46 PM
  4. I see they still haven't fixed it yet
    By Sid in forum Distributed Computing
    Replies: 20
    Last Post: 03-20-05, 07:30 AM
  5. Need help with Apache Includes
    By TonyT in forum Software Forum
    Replies: 10
    Last Post: 02-20-05, 10:36 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •