Results 1 to 4 of 4

Thread: Can I connect a Wireless b router to a wired router?

  1. #1
    Junior Member
    Join Date
    Nov 2006
    Posts
    2

    Can I connect a Wireless b router to a wired router?

    Hello all

    First of all I have vonage phone service.
    My cable modem connects to the vonage wired router.
    It has 4 pc ports to it and I have two desktops hooked up to it.
    All this equipment is downstairs in my family room..

    I just bought a laptop.

    I also have a older but new in the box wireless B linksys router model BEFW11S4 that I picked up real cheap.
    Is it possible for me to connect the wireless Linksys router to the wired vonage router so I can connect wirless to the internet with the laptop while upstairs in my house?
    Or would it just be better for me to get a wireless access point?

    Any info on this would be greatly appreciated....

    Thanks.

    Bailey..

  2. #2
    Member Courtney's Avatar
    Join Date
    Oct 2003
    Location
    Kansas, USA
    Posts
    73
    You have one already. Position the router where you want it and power it up. Connect a computer (wired temporarily) to the router. Log into the router and disable DHCP. (Enable WEP or WAP at this point if you want to use them.) Now connect the router to the Vonage router using one of the standard ports on the router (do not use the uplink port on the router). You now have a wireless access point. You can now disconnect the other computer (and connect it wirelessly).

    Courtney sends....

  3. #3
    Junior Member
    Join Date
    Nov 2006
    Posts
    2
    Thanks for the reply Courtney. It's appreciated.
    Thats pretty much what I did before I read your post with the exception of setting the Linksys wireless router with a static ip.
    Don't know if I needed to do this but somewhere in the Linksys directions I read where you can do this..
    It's working fine except I'll just loose the connect after an hour or so. i just unplug the wireless for a minute and it works again.
    Don't think it should be doing that though.


    Bailey

  4. #4
    Moderator YeOldeStonecat's Avatar
    Join Date
    Jan 2001
    Location
    Somewhere along the shoreline in New England
    Posts
    50,919
    Most recent firmware on the Linksys?

    Your Vonage supplied router isn't also 192.168.1.1 is it? When flipping a wireless router into a bandaged AP mode..you need to make sure it's not going to conflict with the LAN IP of your main router, or any other nodes. Good to have it in the same IP range so you can easily manage it, just put it on an IP outside the main routers DHCP pool..if you Vonage router is 192.168.1.1, put the Linksys on 192.168.1.253 perhaps. Of ir the Vonage is 192.168.0.1....put it on 192.168.0.253.

    Using an uplink port may be needed...if your main router doesn't have one, or isn't auto direction sensing. It's the WAN/internet port of the Linksys you donm't use.

    If you get wireless for a while...it's most likely setup OK...now it's a matter of troubleshooting wireless performance. Hence most recent firmware. Make sure your SSID is unique so you're not conflicting with neighbors that may also have a Linksys. Trying different channels such as 1 or 11.
    MORNING WOOD Lumber Company
    Guinness for Strength!!!

Similar Threads

  1. How do I connect 1 wireless router to another wireless router
    By cmcrussell3 in forum Wireless Networks & Routers
    Replies: 3
    Last Post: 10-14-06, 12:30 PM
  2. wired router/wireless router network problem
    By MidgetBrawl in forum Wireless Networks & Routers
    Replies: 4
    Last Post: 08-08-06, 12:29 PM
  3. wireless router cannot connect to internet
    By gkrheera in forum Wireless Networks & Routers
    Replies: 4
    Last Post: 07-26-06, 09:54 PM
  4. VPN, router, Wireless setup.
    By ckct in forum Networking Forum
    Replies: 1
    Last Post: 02-16-06, 04:07 PM
  5. I see they still haven't fixed it yet
    By Sid in forum Distributed Computing
    Replies: 20
    Last Post: 03-20-05, 07:30 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •