Hi there,

I'm trying to make a connection between a WRT54 GL (in client routed mode) to 2 WRT54GL (in WDS mode) and unfortunatly it's not working. This is what my configuration looks like.

AP1 WRT54GL
SSID : Test
WDS Talisman firmware
Network IP : 192.168.4.100
Network gw : 192.168.4.1
Connected with a calbe to the router (192.168.4.1)

AP2 WRT54GL
SSID : Test
WDS Talisman firmware
Network ip : 192.168.4.110
Network gw : 192.168.4.1

AP3 WRT54GL
SSID : Test
Client routed AP
Internet ip : 192.168.4.120
Internet gw : 192.168.4.1
Network ip : 192.168.10.1
DHCP server : 192.168.10.50 - 99

SRX
SSID : SRXtest
AP
Network ip : via dhcp client of AP3
Network gw : 192.168.10.1
Connected with a cable to AP3

I can only connect AP3 to the AP in WDS with the best signal and most times that's AP2. The problem is that i cannot reach the default gateway or the internet from AP2, AP3 or the SRX.

I want to use WDS in combination with a Client routed AP, so i can use another type of encryption on the SRX i want to connect to AP3.

The big questions for me are : Can WDS and Client routed AP work together in this setup? Have i made a mistake in the configuration?