Results 1 to 2 of 2

Thread: A routing query

  1. #1

    A routing query

    I was configuring 2 VLANS in a Extreme Switch.
    I am able to communicate to the other side of the Network through one VLAN but not through the other VLAN. This is the running config file. Could anyone help?


    Extreme48:2 # show config

    configure port 28 auto on

    # Configuration generated Wed Feb 22 16:12:30 2006

    # Software Version 4.1.21 (Build 7) By Patch_Master on Mon 09/15/2003 11:48p

    # System Name "Extreme48"

    configure port 30 auto on

    configure qosmode ingress

    disable pacert 31 auto on

    configure dot1q ethertype 8100

    # disable jumbo32 auto on

    enable system-watchdog

    disable system-watchdog system-boot-offline

    enable system-faultdetect

    enable system-faultdetect system-boot-offline

    configure system-faultdetect no-of-faults 0

    configure system-faultdetect no-of-rrfaults 0

    configure system-faultdetect time-interval 0

    config qosprofile QP1 minbw 0% maxbw 100% priority Low

    config qosprofile QP2 minbw 0% maxbw 100% priority Normal

    config qosprofile QP3 minbw 0% maxbw 100% priority Medium

    config qosprofile QP4 minbw 0% maxbw 100% priority High

    delete protocol ipauto on

    delete protocol ipx

    delete protocol netbioson

    delete protocol decnet

    delete protocol appletalk

    delete protocol ipx_8022

    delete protocol ipx_snapn

    create protocol ipx_snap

    create protocol ipx_8022n

    create protocol appletalk

    create protocol decnet on

    create protocol netbios

    create protocol ipxuto on

    create protocol IP

    configure vlan default delete ports all

    create vlan "Default"

    create vlan "ABC" auto on

    #

    # Config information for VLAN Default.

    config vlan "Default" tag 1 # VLAN-ID=0x1 Global Tag 1

    config vlan "Default" protocol "ANY"

    config vlan "Default" qosprofile "QP1"

    config vlan "Default" ipaddress 64.83.0.254 255.255.248.0

    configure vlan "Default" add port 1 untagged

    configure vlan "Default" add port 2 untagged

    configure vlan "Default" add port 3 untagged

    configure vlan "Default" add port 4 untagged

    configure vlan "Default" add port 13 untagged

    configure vlan "Default" add port 14 untagged

    configure vlan "Default" add port 15 untagged

    configure vlan "Default" add port 16 untagged

    #onfigure protocol ipx_8022 add llc e0e0

    # Config information for VLAN ABC.nap 809b snap 80f3

    config vlan "ABC" tag 2 # VLAN-ID=0x2 Global Tag 2

    config vlan "ABC" protocol "ANY"lc f0f0

    config vlan "ABC" qosprofile "QP1" 37

    config vlan "ABC" ipaddress 64.83.14.254 255.255.255.0

    configure vlan "ABC" add port 9 untagged

    configure vlan "ABC" add port 10 untagged

    configure vlan "ABC" add port 11 untagged

    configure vlan "ABC" add port 12 untagged



    # Boot informationt 2

    use image primary port cost 100 2

    use configuration primary

    # syslog configuration cost 100 3

    configure log display info

    disable log displayort cost 19 4

    configure syslog 0.0.0.0 local0 info

    disable syslog s0 port cost 100 9

    delete account user 10

    configure account admin encrypted0

    Si3EQI$yn0n8Oa7YI7gzXicknls//

    Si3EQI$yn0n8Oa7YI7gzXicknls//00 11

    create account user "user" encrypted "yN/s1z$AWLXffgeW4GzVczqR3HIh0"

    create account admin "hello" encrypted "SD4AA1$/mDcL/9LeUdyyMUj4tOPg/"

    enable telnet0 port 13

    configure banner0 port cost 100 13

    enable stpd s0 port 14

    configure stpd s0 port cost 100 14

    enable webd s0 port 15

    enable snmp accessport cost 100 15

    enable snmp traport 16

    configure snmp add trapreceiver 192.25.55.25 community "ST.-1407633639.162"

    configure snmp community readwrite "notprivate"

    configure snmp community readonly "public"

    configure snmp sysName "Extreme48"

    configure snmp sysLocation "Universe"

    configure snmp sysContact "support@extremenetworks.com, +1 888 257 3000"

    disable rmonboth ports 3

    disable idletimeoutsts 4

    enable clipaging ports 5

    enable cli-config-logging

    configure port 1 auto on

    enable edp port 1ports 8

    configure port 2 auto on

    enable edp port 2ports 10

    configure port 3 auto on1

    enable edp port 3ports 12

    configure port 4 auto on3

    enable edp port 4ports 14

    configure port 5 auto on5

    enable edp port 5ports 16

    configure port 6 auto on7

    enable edp port 6ports 18

    configure port 7 auto on9

    enable edp port 7ports 20

    configure port 8 auto on1

    enable edp port 8ports 22

    configure port 9 auto on3

    enable edp port 9ports 24

    configure port 10 auto on

    enable edp port 10orts 26

    configure port 11 auto on

    enable edp port 11orts 28

    configure port 12 auto on

    enable edp port 12orts 30

    configure port 13 auto on

    enable edp port 13orts 32

    configure port 14 auto on

    enable edp port 14orts 34

    configure port 15 auto on

    enable edp port 15orts 36

    configure port 16 auto on

    enable edp port 16orts 38

    configure port 17 auto on

    enable edp port 17orts 40

    configure port 18 auto on

    enable edp port 18orts 42

    configure port 19 auto on

    enable edp port 19orts 44

    configure port 20 auto on

    enable edp port 20orts 46

    configure port 21 auto on

    enable edp port 21orts 48

    configure port 22 auto on

    enable edp port 22orts 50

    configure port 23 auto on

    enable edp port 23ation and static entries

    configure port 24 auto on00

    enable edp port 24

    configure port 25 auto on

    enable edp port 25

    configure port 26 auto onefault"

    enable edp port 26g vlan "Default"

    configure port 27 auto oncast vlan "Default"

    enable edp port 27Default"

    configure port 28 auto ont"

    enable edp port 28hable vlan "Default"

    configure port 29 auto onn "Default"

    enable edp port 29

    configure port 30 auto onBC"

    enable edp port 30g vlan "ABC"

    configure port 31 auto oncast vlan "ABC"

    enable edp port 31ABC"

    configure port 32 auto on

    enable edp port 32hable vlan "ABC"

    configure port 33 auto onn "ABC"

    enable edp port 33

    configure port 34 auto on

    enable edp port 34sh

    configure port 35 auto on00 0

    enable edp port 35adcast

    configure port 36 auto on

    enable edp port 36aring

    configure port 37 auto on

    enable edp port 37

    configure port 38 auto on

    enable edp port 38tion

    configure port 39 auto on

    enable edp port 39ration

    configure port 40 auto ont 64.83.0.1 1

    enable edp port 40uration

    configure port 41 auto on

    enable edp port 41ng

    configure port 42 auto onimer 260 260

    enable edp port 42ding "ABC"

    configure port 43 auto on

    enable edp port 43ding "Default"

    configure port 44 auto on

    enable edp port 44nfiguration

    configure port 45 auto on

    enable edp port 45v2only vlan "ABC"

    configure port 46 auto onn "ABC"

    enable edp port 46BC" trusted-gateway None

    configure port 47 auto onort-filter None

    enable edp port 47BC" export-filter None

    configure port 48 auto onult"

    enable edp port 48v2only vlan "Default"

    enable smartredundancy 49n "Default"

    configure port 49 auto on trusted-gateway None

    enable edp port 49efault" import-filter None

    enable smartredundancy 50 export-filter None

    configure port 50 auto onnfiguration

    enable edp port 50tion



    # Protocol definitionsse

    configure protocol ipx_snap add snap 8137

    configure protocol ipx_8022 add llc e0e0

    configure protocol appletalk add snap 809b snap 80f3

    configure protocol decnet add etype 6003 etype 6004

    configure protocol netbios add llc f0f0

    configure protocol ipx add etype 8137

    configure protocol IP add etype 800 etype 806



    # Spanning tree information

    disable stpd s0able/disable state

    enable stpd s0 port 1

    configure stpd s0 port cost 100 1

    enable stpd s0 port 2

    configure stpd s0 port cost 100 2

    enable stpd s0 port 3

    configure stpd s0 port cost 100 3

    enable stpd s0 port 4

    configure stpd s0 port cost 19 4r 10 35

    enable stpd s0 port 9C" timer 10 35

    configure stpd s0 port cost 100 9

    enable stpd s0 port 10

    configure stpd s0 port cost 100 10

    enable stpd s0 port 11

    configure stpd s0 port cost 100 11

    enable stpd s0 port 12

    configure stpd s0 port cost 19 12

    enable stpd s0 port 13.0

    configure stpd s0 port cost 100 13-filter None

    enable stpd s0 port 14.0 external-filter None

    configure stpd s0 port cost 100 14

    enable stpd s0 port 15ion

    configure stpd s0 port cost 100 150

    enable stpd s0 port 16

    configure stpd s0 port cost 100 16



    # GVRP configurationC" timer 5 1 10 40

    disable gvrpvlan "ABC" authentication none

    config gvrp both ports 1t" area 0.0.0.0

    config gvrp both ports 2

    config gvrp both ports 3t" cost 1

    config gvrp both ports 4t" priority 1

    config gvrp both ports 5t" timer 5 1 10 40

    config gvrp both ports 6t" authentication none

    config gvrp both ports 7tion

    config gvrp both ports 8ion

    config gvrp both ports 9ic

    config gvrp both ports 10

    config gvrp both ports 11

    config gvrp both ports 12ation

    config gvrp both ports 13iority 0

    config gvrp both ports 14mer 2

    config gvrp both ports 15

    config gvrp both ports 16

    config gvrp both ports 17on

    config gvrp both ports 18

    config gvrp both ports 19

    config gvrp both ports 20

    config gvrp both ports 21

    config gvrp both ports 22

    config gvrp both ports 23

    config gvrp both ports 24

    config gvrp both ports 25

    config gvrp both ports 26on

    config gvrp both ports 27

    config gvrp both ports 28mary server "192.25.55.4"

    config gvrp both ports 29ondary server ""

    config gvrp both ports 30ate-interval 64

    config gvrp both ports 31utodst

    config gvrp both ports 32

    config gvrp both ports 33 primary

    config gvrp both ports 34 secondary

    config gvrp both ports 35shared-secret ""

    config gvrp both ports 36y shared-secret ""

    config gvrp both ports 37

    config gvrp both ports 38

    config gvrp both ports 39le for "Extreme48".

    config gvrp both ports 40

    config gvrp both ports 41

    config gvrp both ports 42

    config gvrp both ports 43

    config gvrp both ports 44

    config gvrp both ports 45

    config gvrp both ports 46

    config gvrp both ports 47

    config gvrp both ports 48

    config gvrp both ports 49

    config gvrp both ports 50



    # MAC FDB configuration and static entries

    configure fdb agingtime 300



    config iparp timeout 20



    # -- IP Interface[0] = "Default"

    enable ipforwarding vlan "Default"

    enable ipforwarding broadcast vlan "Default"

    disable isq vlan "Default"

    disable irdp vlan "Default"

    enable icmp unreachable vlan "Default"

    enable icmp redirects vlan "Default"



    # -- IP Interface[1] = "ABC"

    enable ipforwarding vlan "ABC"

    enable ipforwarding broadcast vlan "ABC"

    disable isq vlan "ABC"

    disable irdp vlan "ABC"

    enable icmp unreachable vlan "ABC"

    enable icmp redirects vlan "ABC"



    # Global IP settings.

    enable iparp refresh

    configure irdp 450 600 1800 0

    configure irdp broadcast

    disable icmp useredirects

    disable iproute sharing

    disable multinet

    disable bootprelay

    #

    # IP ARP Configuration

    #

    # IP Route Configuration

    config iproute add default 64.83.0.1 1

    # Multicast configuration

    config igmp 125 10 1

    enable igmp snooping

    configure igmp snooping timer 260 260

    disable ipmcforwarding "ABC"

    enable igmp "ABC"

    disable ipmcforwarding "Default"

    enable igmp "Default"

    # RIP interface configuration

    config rip add vlan "ABC"

    config rip txmode v2only vlan "ABC"

    config rip rxmode any vlan "ABC"

    config rip vlan "ABC" trusted-gateway None

    config rip vlan "ABC" import-filter None

    config rip vlan "ABC" export-filter None

    config rip add vlan "Default"

    config rip txmode v2only vlan "Default"

    config rip rxmode any vlan "Default"

    config rip vlan "Default" trusted-gateway None

    config rip vlan "Default" import-filter None

    config rip vlan "Default" export-filter None

    # RIP global parameter configuration

    enable rip aggregation

    enable rip splithorizon

    enable rip poisonreverse

    enable rip triggerupdate

    enable rip export static cost 0 tag 0

    disable rip export ospf-intra

    disable rip export ospf-inter

    disable rip export ospf-extern1

    disable rip export ospf-extern2

    config rip updatetime 30

    config rip routetimeout 180

    config rip garbagetime 120

    # RIP Global enable/disable state

    enable rip



    #

    # DVMRP Router Configuration

    #

    config DVMRP timer 60 140

    disable DVMRP

    config DVMRP vlan "Default" timer 10 35

    config DVMRP vlan "ABC" timer 10 35



    #

    # PIM Router Configuration

    #

    disable pim-dm



    # Ospf Area Configuration

    create ospf area 0.0.0.0

    config ospf area 0.0.0.0 interarea-filter None

    config ospf area 0.0.0.0 external-filter None

    # Ospf Range Configuration

    # Interface Configuration

    config ospf vlan "ABC" area 0.0.0.0



    config ospf vlan "ABC" cost 1

    config ospf vlan "ABC" priority 1

    config ospf vlan "ABC" timer 5 1 10 40

    config ospf vlan "ABC" authentication none

    config ospf vlan "Default" area 0.0.0.0



    config ospf vlan "Default" cost 1

    config ospf vlan "Default" priority 1

    config ospf vlan "Default" timer 5 1 10 40

    config ospf vlan "Default" authentication none

    # Virtual Link Configuration

    # OSPF Router Configuration

    disable ospf export static

    disable ospf export rip



    # ESRP Interface Configuration

    config vlan "ABC" esrp priority 0

    config vlan "ABC" esrp timer 2





    # IPX routing configuration

    enable ipxrip

    enable ipxsap

    configure ipxmaxhops 16



    # IPX static routes



    # IPX static services



    # SNTP client configuration

    enable sntp-client

    configure sntp-client primary server "192.25.55.4"

    configure sntp-client secondary server ""

    configure sntp-client update-interval 64

    configure timezone -360 autodst

    disable radius

    unconfigure radius server primary

    unconfigure radius server secondary

    configure radius primary shared-secret ""

    configure radius secondary shared-secret ""



    #

    # End of configuration file for "Extreme48".

    #

    Extreme48:3 #

  2. #2
    Junior Member
    Join Date
    Feb 2006
    Posts
    9
    I have a similar problem. I don't know if this will help you. First, can you ping both network from either side?

    For me, i am able to ping the other comp. The problem I had is that one comp cannot browse access antoher comp's share folder. Both comp si Home XP and what i find that:

    - static ip for both networks
    - enable netbios over TCP/IP
    - in XP firewall, enable 445 TCp from that addy

    That works for me. I believed the firewall is blocking the netbios protocol (using port 445 TCP).

    I am still new at this..and not sure if it might post a security risk..does anyone know?

Similar Threads

  1. CCNA
    By dmsmed in forum Networking Forum
    Replies: 14
    Last Post: 03-02-06, 10:06 AM
  2. Access 2002 query problem
    By Jon in forum Programming Forum
    Replies: 1
    Last Post: 05-09-03, 12:18 AM
  3. Dynamic Routing on Cable/DSL Router
    By site4sure in forum General Broadband Forum
    Replies: 2
    Last Post: 04-26-01, 01:41 PM
  4. routing?
    By neo86 in forum General Broadband Forum
    Replies: 0
    Last Post: 10-25-00, 03:32 PM
  5. routing problems... bgp...
    By Sonrics in forum Broadband Archive
    Replies: 2
    Last Post: 06-16-99, 07:47 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •