Results 1 to 3 of 3

Thread: Settings got really slow, n SG TCP shows blank current settings

  1. #1

    Settings got really slow, n SG TCP shows blank current settings

    Browser/OS = Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.7.12) Gecko/20050915 Firefox/1.0.7
    Notes: Read the Analyzer FAQ if the above is not your IP address.
    TCP options string = 020405b40103030001010402
    MTU = 1500
    MTU is fully optimized for broadband.
    MSS = 1460
    Maximum useful data in each packet = 1460, which equals MSS.
    Default Receive Window (RWIN) = 64240
    RWIN Scaling (RFC1323) = 0 bits
    Unscaled Receive Window = 64240

    RWIN is a multiple of MSS
    Other values for RWIN that might work well with your current MTU/MSS:
    513920 (MSS x 44 * scale factor of 8)
    256960 (MSS x 44 * scale factor of 4)
    128480 (MSS x 44 * scale factor of 2)
    bandwidth * delay product (Note this is not a speed test):

    Your RcvWindow limits you to: 2569.6 kbps (321.2 KBytes/s) @ 200ms
    Your RcvWindow limits you to: 1027.84 kbps (128.48 KBytes/s) @ 500ms
    MTU Discovery (RFC1191) = ON
    Time to live left = 57 hops

    TTL value is ok.
    Timestamps (RFC1323) = OFF
    Selective Acknowledgements (RFC2018) = ON
    IP type of service field (RFC1349) = 00000000 (0)

  2. #2


    when i open the SG TCP Optimizer it shows

    For Current Settings-

    TCP Receive Window: (Blank)

    Max Duplicate ACKs: (Blank)

    Time to Live (TTL): (Blank)

    Both TCP 1323 Options: Unchecked

    ---Advanced Settings---

    MaxConnectionsPerServer: (Blank)

    MaxConnectionsPer1_0Server: (Blank)

    and the whole right side, next to MaxConnection stuff is (blank) settings

    like they got erased or hidin
    Last edited by d2fanatic007; 11-29-05 at 07:50 PM.

  3. #3
    fem the retarded rabbit mccoffee's Avatar
    Join Date
    Nov 2001
    Cleveland, Ohio, United States
    Try thease in the sg optmizer below me to download and install

    General Settings tab:

    Custom settings - check
    Modify All Network Adapters - check
    network adapter selection - your NIC
    MTU -1500
    TTL - 64
    TCP Receive Window -64240
    MTU Discovery - Yes
    Black Hole Detect - No
    Selective Acks - Yes
    Max Duplicate ACKs - 2
    TCP 1323 Options:
    Windows Scaling - uncheck
    Timestamps - uncheck

    Advanced Settings tab:

    Max Connections per Server - 10
    Max Connections per 1.0 Server - 20
    LocalPriority - 5
    Host Priority - 6
    DNSPriority - 7
    NetbtPriority - 8
    Lan Browsing speedup - optimized
    QoS: NonBestEffortLimit - 0
    ToS: DisableUserTOSSetting - 0
    ToS: DefaultTOSValue - 240
    MaxNegativeCacheTtl - 0
    NetFailureCacheTime - 0
    NegativeSOACache Time - 0
    LAN Request Buffer Size - 32768

    Then select "Apply Changes" and reboot to take effect


    1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need. For a stand alone pc all you need is Internet Protocol TCP/IP.

    2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.

    3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer and set your duplex mode to "auto". If you are using a router make sure you have the latest firmware.

    4. Clean out your temporary internet files with CrapCleaner.

    5. Power cycle your modem i.e. unplug it for at least 15 seconds.

    6. Download, update and scan with SpyBot S&D 1.4 EXACTLY as mnosteele has explained HERE & Ad-Aware SE 1.06 EXACTLY as mnosteele has explained HERE to remove any spyware then install and update SpywareBlaster 3.4 to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES. If these 2 programs find a lot of things then please post a HijackThis 1.99.1 log for us to look at.

    7. Make sure you do the faster web page tweak in our Help & Tips page.

    8. If you have Zone Alarm as a firewall uninstall it and search your pc for the left over files.

    9. Install Kerio Personal Firewall 2.1.5, it's FREE and uses next to no resources.

    10. Do a FREE online virus scan from Kaspersky Webscan, make sure to check the option to use the EXTENDED DATABASE.

    11. Make sure you have ALL of the latest Windows Updates.

    8) ;D
    Comptia a+ n+

Similar Threads

  1. Tip on Slow Connection Patch Updates
    By minir in forum General Discussion Board
    Replies: 0
    Last Post: 02-16-04, 11:28 AM
  2. My Current Settings.. Plz help
    By PSiBER in forum Broadband Tweaks Help
    Replies: 3
    Last Post: 02-04-04, 12:04 AM
  3. Help! Newbie Need Cablenut Settings..DSL very slow!!
    By duckmn77 in forum Broadband Tweaks Help
    Replies: 0
    Last Post: 11-07-02, 09:56 PM
  4. Replies: 3
    Last Post: 06-15-01, 06:57 PM
  5. Current TCP Recieve Window settings....?
    By Varmit1 in forum Broadband Tweaks Help
    Replies: 3
    Last Post: 04-04-01, 01:19 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts