Results 1 to 11 of 11

Thread: Need help with Apache Includes

  1. #1
    Elite Member TonyT's Avatar
    Join Date
    Jan 2000
    Location
    Fairfax, VA
    Posts
    10,336

    Need help with Apache Includes

    I have been battling over this for last night and all of this morning, reading apache docs etc, and still no joy.

    Exactly what needs to be changed in my http.conf to get server side includes to work on my local debian server. PHP4 works just fine and is installed correctly, standalone .php scripts execute as intended, but I cannot get ssi to work in html files. I have a left_nav menu on all pages of a website and rather than edit each page's menu, I want to be able to use this code on each page and thus only have to edit one file to change the displayed menu, but includes don't work yet.

    html menu code:
    <p class="left_nav"><?php include('left_nav.php'); ?></p>

    HELP!!!!
    this is my partial apache httpd.conf:
    Code:
    ##
    # Dynamic Shared Object (DSO) Support
    #
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Please read the file README.DSO in the Apache 1.3 distribution for more
    # details about the DSO mechanism and run `apache -l' for the list of already
    # built-in (statically linked and thus always available) modules in your apache
    # binary.
    #
    # Please keep this LoadModule: line here, it is needed for installation.
    # LoadModule vhost_alias_module /usr/lib/apache/1.3/mod_vhost_alias.so
    # LoadModule env_module /usr/lib/apache/1.3/mod_env.so
    LoadModule config_log_module /usr/lib/apache/1.3/mod_log_config.so
    LoadModule mime_magic_module /usr/lib/apache/1.3/mod_mime_magic.so
    LoadModule mime_module /usr/lib/apache/1.3/mod_mime.so
    LoadModule negotiation_module /usr/lib/apache/1.3/mod_negotiation.so
    LoadModule status_module /usr/lib/apache/1.3/mod_status.so
    # LoadModule info_module /usr/lib/apache/1.3/mod_info.so
    LoadModule includes_module /usr/lib/apache/1.3/mod_include.so
    LoadModule autoindex_module /usr/lib/apache/1.3/mod_autoindex.so
    LoadModule dir_module /usr/lib/apache/1.3/mod_dir.so
    LoadModule cgi_module /usr/lib/apache/1.3/mod_cgi.so
    # LoadModule asis_module /usr/lib/apache/1.3/mod_asis.so
    # LoadModule imap_module /usr/lib/apache/1.3/mod_imap.so
    # LoadModule action_module /usr/lib/apache/1.3/mod_actions.so
    # LoadModule speling_module /usr/lib/apache/1.3/mod_speling.so
    LoadModule userdir_module /usr/lib/apache/1.3/mod_userdir.so
    LoadModule alias_module /usr/lib/apache/1.3/mod_alias.so
    LoadModule rewrite_module /usr/lib/apache/1.3/mod_rewrite.so
    LoadModule access_module /usr/lib/apache/1.3/mod_access.so
    LoadModule auth_module /usr/lib/apache/1.3/mod_auth.so
    # LoadModule anon_auth_module /usr/lib/apache/1.3/mod_auth_anon.so
    # LoadModule dbm_auth_module /usr/lib/apache/1.3/mod_auth_dbm.so
    # LoadModule db_auth_module /usr/lib/apache/1.3/mod_auth_db.so
    # LoadModule proxy_module /usr/lib/apache/1.3/libproxy.so
    # LoadModule digest_module /usr/lib/apache/1.3/mod_digest.so
    # LoadModule cern_meta_module /usr/lib/apache/1.3/mod_cern_meta.so
    LoadModule expires_module /usr/lib/apache/1.3/mod_expires.so
    # LoadModule headers_module /usr/lib/apache/1.3/mod_headers.so
    # LoadModule usertrack_module /usr/lib/apache/1.3/mod_usertrack.so
    LoadModule unique_id_module /usr/lib/apache/1.3/mod_unique_id.so
    LoadModule setenvif_module /usr/lib/apache/1.3/mod_setenvif.so
    # LoadModule sys_auth_module /usr/lib/apache/1.3/mod_auth_sys.so
    # LoadModule put_module /usr/lib/apache/1.3/mod_put.so
    # LoadModule throttle_module /usr/lib/apache/1.3/mod_throttle.so
    # LoadModule allowdev_module /usr/lib/apache/1.3/mod_allowdev.so
    # LoadModule eaccess_module /usr/lib/apache/1.3/mod_eaccess.so
    LoadModule php4_module /usr/lib/apache/1.3/libphp4.so
    # LoadModule roaming_module /usr/lib/apache/1.3/mod_roaming.so
    
    #
    # ExtendedStatus: controls whether Apache will generate "full" status
    # information (ExtendedStatus On) or just basic information (ExtendedStatus
    # Off) when the "server-status" handler is called. The default is Off.
    #
    ExtendedStatus On
    
    ### Section 2: 'Main' server configuration
    #
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition.  These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    #
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    #
    
    #
    # If your ServerType directive (set earlier in the 'Global Environment'
    # section) is set to "inetd", the next few directives don't have any
    # effect since their settings are defined by the inetd configuration.
    # Skip ahead to the ServerAdmin directive.
    #
    
    #
    # Port: The port to which the standalone server listens. For
    # ports < 1023, you will need apache to be run as root initially.
    #
    Port 80
    
    #
    # If you wish apache to run as a different user or group, you must run
    # apacheas root initially and it will switch.  
    #
    # User/Group: The name (or #number) of the user/group to run apache as.
    #  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
    #  . On HPUX you may not be able to use shared memory as nobody, and the
    #    suggested workaround is to create a user www and use that user.
    #  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
    #  when the value of (unsigned)Group is above 60000; 
    #  don't use Group nobody on these systems!
    #
    User www-data
    Group www-data
    
    #
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed.  This address appears on some server-generated pages, such
    # as error documents.
    #
    ServerAdmin webmaster@e433
    
    #
    # ServerName: allows you to set a host name which is sent back to clients for
    # your server if it's different than the one the program would get (i.e., use
    # "www" instead of the host's real name).
    #
    # Note: You cannot just invent host names and hope they work. The name you 
    # define here must be a valid DNS name for your host. If you don't understand
    # this, ask your network administrator.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    # You will have to access it by its address (e.g., http://123.45.67.89/)
    # anyway, and this will make redirections work in a sensible way.
    #
    #ServerName new.host.name
    
    #
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    #
    DocumentRoot /home/turrisi/public_html/
    
    #
    # Each directory to which Apache has access, can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories). 
    #
    # First, we configure the "default" to be a very restrictive set of 
    # permissions.  
    #
    <Directory />
        Options SymLinksIfOwnerMatch
        AllowOverride None
    </Directory>
    
    #
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    #
    
    #
    # This should be changed to whatever you set DocumentRoot to.
    #
    <Directory /home/turrisi/public_html/>
    
    #
    # This may also be "None", "All", or any combination of "Indexes",
    # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
        Options Indexes Includes FollowSymLinks MultiViews
    
    #
    # This controls which options the .htaccess files in directories can
    # override. Can also be "All", or any combination of "Options", "FileInfo", 
    # "AuthConfig", and "Limit"
    #
        AllowOverride None
    
    #
    # Controls who can get stuff from this server.
    #
        Order allow,deny
        Allow from all
    </Directory>
    
    #
    # UserDir: The name of the directory which is appended onto a user's home
    # directory if a ~user request is received.
    #
    <IfModule mod_userdir.c>
        UserDir public_html
    </IfModule>
    
    #
    # Control access to UserDir directories.  The following is an example
    # for a site where these directories are restricted to read-only.
    #
    <Directory /home/*/public_html>
        AllowOverride FileInfo AuthConfig Limit
        Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
        <Limit GET POST OPTIONS PROPFIND>
            Order allow,deny
            Allow from all
        </Limit>
        <Limit PUT DELETE PATCH PROPPATCH MKCOL COPY MOVE LOCK UNLOCK>
            Order deny,allow
            Deny from all
        </Limit>
    </Directory>
    
    #
    # DirectoryIndex: Name of the file or files to use as a pre-written HTML
    # directory index.  Separate multiple entries with spaces.
    #
    <IfModule mod_dir.c>
        DirectoryIndex index.html index.php index.htm index.shtml index.cgi
    </IfModule>
    
    #
    # AccessFileName: The name of the file to look for in each directory
    # for access control information.
    #
    AccessFileName .htaccess
    
    #
    # The following lines prevent .htaccess files from being viewed by
    # Web clients.  Since .htaccess files often contain authorization
    # information, access is disallowed for security reasons.  Comment
    # these lines out if you want Web visitors to see the contents of
    # .htaccess files.  If you change the AccessFileName directive above,
    # be sure to make the corresponding changes here.
    #
    # Also, folks tend to use names such as .htpasswd for password
    # files, so this will protect those as well.
    #
    <Files ~ "^\.ht">
        Order allow,deny
        Deny from all
    </Files>
    
    #
    # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
    # document that was negotiated on the basis of content. This asks proxy
    # servers not to cache the document. Uncommenting the following line disables
    # this behavior, and proxies will be allowed to cache the documents.
    #
    #CacheNegotiatedDocs
    
    #
    # UseCanonicalName:  (new for 1.3)  With this setting turned on, whenever
    # Apache needs to construct a self-referencing URL (a URL that refers back
    # to the server the response is coming from) it will use ServerName and
    # Port to form a "canonical" name.  With this setting off, Apache will
    # use the hostname:port that the client supplied, when possible.  This
    # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
    #
    UseCanonicalName On
    
    #
    # TypesConfig describes where the mime.types file (or equivalent) is
    # to be found.
    #
    TypesConfig /etc/mime.types
    
    #
    # DefaultType is the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value.  If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    #
    DefaultType text/plain
    
    #
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type.  The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    # mod_mime_magic is not part of the default server (you have to add
    # it yourself with a LoadModule [see the DSO paragraph in the 'Global
    # Environment' section], or recompile the server and include mod_mime_magic
    # as part of the configuration), so it's enclosed in an <IfModule> container.
    # This means that the MIMEMagicFile directive will only be processed if the
    # module is part of the server.
    #
    <IfModule mod_mime_magic.c>
        MIMEMagicFile share/magic
    </IfModule>
    
    #
    # HostnameLookups: Log the names of clients or just their IP addresses
    # e.g., www.apache.org (on) or 204.62.129.132 (off).
    # The default is off because it'd be overall better for the net if people
    # had to knowingly turn this feature on, since enabling it means that
    # each client request will result in AT LEAST one lookup request to the
    # nameserver.
    #
    HostnameLookups Off
    
    # Note that Log files are now rotated by logrotate, not by apache itself.
    # This means that apache no longer attempts to magically determine
    # where your log files are kept; you have to fill out stanzas in
    # /etc/logrotate.d/apache yourself.
    
    #
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here.  If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    #
    ErrorLog /var/log/apache/error.log
    
    #
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    #
    LogLevel warn
    
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %T %v" full
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %P %T" debug
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    LogFormat "%{Referer}i -> %U" referer
    LogFormat "%{User-agent}i" agent
    
    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    #CustomLog /var/log/apache/access.log common
    
    #
    # If you would like to have agent and referer logfiles, uncomment the
    # following directives.
    #
    #CustomLog /var/log/apache/referer.log referer
    #CustomLog /var/log/apache/agent.log agent
    
    #
    # If you prefer a single logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    CustomLog /var/log/apache/access.log combined
    
    #
    # Optionally add a line containing the server version and virtual host
    # name to server-generated pages (error documents, FTP directory listings,
    # mod_status and mod_info output etc., but not CGI generated documents).
    # Set to "EMail" to also include a mailto: link to the ServerAdmin.
    # Set to one of:  On | Off | EMail
    #
    ServerSignature On
    
    #
    # Aliases: Add here as many aliases as you need (with no limit). The format is 
    # Alias fakename realname
    #
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL.  So "/icons" isn't aliased in this
    # example, only "/icons/"..
    #
    
    Alias /icons/ /usr/share/apache/icons/
    
    <Directory /usr/share/apache/icons>
        Options Indexes MultiViews
        AllowOverride None
        Order allow,deny
        Allow from all
    </Directory>
    
    #
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    #
    ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
    
    #
    # "/usr/lib/cgi-bin" could be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    #
    <Directory /usr/lib/cgi-bin/>
        AllowOverride None
        Options ExecCGI
        Order allow,deny
        Allow from all
    </Directory>
    
    #
    # Redirect allows you to tell clients about documents which used to exist in
    # your server's namespace, but do not anymore. This allows you to tell the
    # clients where to look for the relocated document.
    # Format: Redirect old-URI new-URL
    #
    
    #
    # Directives controlling the display of server-generated directory listings.
    #
    
    <IfModule mod_autoindex.c>
    
        #
        # FancyIndexing: whether you want fancy directory indexing or standard
        #
        IndexOptions FancyIndexing NameWidth=*
    
        #
        # AddIcon* directives tell the server which icon to show for different
        # files or filename extensions.  These are only displayed for
        # FancyIndexed directories.
        #
        AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
    
        AddIconByType (TXT,/icons/text.gif) text/*
        AddIconByType (IMG,/icons/image2.gif) image/*
        AddIconByType (SND,/icons/sound2.gif) audio/*
        AddIconByType (VID,/icons/movie.gif) video/*
    
        AddIcon /icons/binary.gif .bin .exe
        AddIcon /icons/binhex.gif .hqx
        AddIcon /icons/tar.gif .tar
        AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
        AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
        AddIcon /icons/a.gif .ps .ai .eps
        AddIcon /icons/layout.gif .html .shtml .htm .pdf
        AddIcon /icons/text.gif .txt
        AddIcon /icons/c.gif .c
        AddIcon /icons/p.gif .pl .py
        AddIcon /icons/f.gif .for
        AddIcon /icons/dvi.gif .dvi
        AddIcon /icons/uuencoded.gif .uu
        AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
        AddIcon /icons/tex.gif .tex
        AddIcon /icons/bomb.gif core
        AddIcon /icons/deb.gif .deb
    
        AddIcon /icons/back.gif ..
        AddIcon /icons/hand.right.gif README
        AddIcon /icons/folder.gif ^^DIRECTORY^^
        AddIcon /icons/blank.gif ^^BLANKICON^^
    
        #
        # DefaultIcon: which icon to show for files which do not have an icon
        # explicitly set.
        #
        DefaultIcon /icons/unknown.gif
    
        #
        # AddDescription: allows you to place a short description after a file in
        # server-generated indexes.  These are only displayed for FancyIndexed
        # directories.
        # Format: AddDescription "description" filename
        #
        #AddDescription "GZIP compressed document" .gz
        #AddDescription "tar archive" .tar
        #AddDescription "GZIP compressed tar archive" .tgz
    
        #
        # ReadmeName: the name of the README file the server will look for by
        # default, and append to directory listings.
        #
        # HeaderName: the name of a file which should be prepended to
        # directory indexes. 
        #
        # The server will first look for name.html and include it if found.
        # If name.html doesn't exist, the server will then look for name.txt
        # and include it as plaintext if found.
        #
        ReadmeName README
        HeaderName HEADER
    
        #
        # IndexIgnore: a set of filenames which directory indexing should ignore
        # and not include in the listing.  Shell-style wildcarding is permitted.
        #
        IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
    
    </IfModule>
    
    #
    # Document types.
    #
    <IfModule mod_mime.c>
    
        # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+)
        # uncompress information on the fly. Note: Not all browsers support
        # this.  Despite the name similarity, the following Add* directives
        # have nothing to do with the FancyIndexing customization
        # directives above.
    
        AddEncoding x-compress Z
        AddEncoding x-gzip gz tgz
    
        #
        # AddLanguage: allows you to specify the language of a document. You can
        # then use content negotiation to give a browser a file in a language
        # it can understand.
        #
        # Note 1: The suffix does not have to be the same as the language
        # keyword --- those with documents in Polish (whose net-standard
        # language code is pl) may wish to use "AddLanguage pl .po" to
        # avoid the ambiguity with the common suffix for perl scripts.
        #
        # Note 2: The example entries below illustrate that in quite
        # some cases the two character 'Language' abbriviation is not
        # identical to the two character 'Country' code for its country,
        # E.g. 'Danmark/dk' versus 'Danish/da'.
        #
        # Note 3: In the case of 'ltz' we violate the RFC by using a three char
        # specifier. But there is 'work in progress' to fix this and get
        # the reference data for rfc1766 cleaned up.
        #
        # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
        # French (fr) - German (de) - Greek-Modern (el)
        # Italian (it) - Portugese (pt) - Luxembourgeois* (ltz)
        # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
        # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
        #
        AddLanguage da .dk
        AddLanguage nl .nl
        AddLanguage en .en
        AddLanguage et .ee
        AddLanguage fr .fr
        AddLanguage de .de
        AddLanguage el .el
        AddLanguage it .it
        AddLanguage ja .ja
        AddCharset ISO-2022-JP .jis
        AddLanguage pl .po
        AddCharset ISO-8859-2 .iso-pl
        AddLanguage pt .pt
        AddLanguage pt-br .pt-br
        AddLanguage ltz .lu
        AddLanguage ca .ca
        AddLanguage es .es
        AddLanguage sv .se
        AddLanguage cz .cz
    
        # LanguagePriority: allows you to give precedence to some languages
        # in case of a tie during content negotiation.
        #
        # Just list the languages in decreasing order of preference. We have
        # more or less alphabetized them here. You probably want to change
        # this.
        #
        <IfModule mod_negotiation.c>
            LanguagePriority en da nl et fr de el it ja pl pt pt-br ltz ca es sv
        </IfModule>
    
        #
        # AddType allows you to tweak mime.types without actually editing
        # it, or to make certain files to be certain types.
        #
        # For example, the PHP 3.x module (not part of the Apache
        # distribution - see http://www.php.net) will typically use:
        #
        #AddType application/x-httpd-php3 .php3
        #AddType application/x-httpd-php3-source .phps
        #
        # And for PHP 4.x, use:
        #
        AddType application/x-httpd-php .php
        #AddType application/x-httpd-php-source .phps
    
        AddType application/x-tar .tgz
        AddType image/bmp .bmp
    
        # hdml
        AddType text/x-hdml .hdml
    
        #
        # AddHandler allows you to map certain file extensions to "handlers",
        # actions unrelated to filetype. These can be either built into
        # the server or added with the Action command (see below).
        #
        # If you want to use server side includes, or CGI outside
        # ScriptAliased directories, uncomment the following lines.
        #
        # To use CGI scripts:
        #
        AddHandler cgi-script .cgi .sh .pl
    
        #
        # To use server-parsed HTML files
        #
        #AddType text/html .shtml
        #AddHandler server-parsed .shtml
    
        #
        # Uncomment the following line to enable Apache's send-asis HTTP
        # file feature.
        #
        #AddHandler send-as-is asis
    
        #
        # If you wish to use server-parsed imagemap files, use
        #
        #AddHandler imap-file map
    
        #
        # To enable type maps, you might want to use
        #
        #AddHandler type-map var
    
    </IfModule>
    # End of document types.
    
    # Default charset to iso-8859-1 (ttp://www.apache.org/info/css-security/).
    
    AddDefaultCharset on
    
    #
    # Action: lets you define media types that will execute a script whenever
    # a matching file is called. This eliminates the need for repeated URL
    # pathnames for oft-used CGI file processors.
    # Format: Action media/type /cgi-script/location
    # Format: Action handler-name /cgi-script/location
    #
    
    #
    # MetaDir: specifies the name of the directory in which Apache can find
    # meta information files. These files contain additional HTTP headers
    # to include when sending the document
    #
    #MetaDir .web
    
    #
    # MetaSuffix: specifies the file name suffix for the file containing the
    # meta information.
    #
    #MetaSuffix .meta
    
    #
    # Customizable error response (Apache style)
    #  these come in three flavors
    #
    #    1) plain text
    #ErrorDocument 500 "The server made a boo boo.
    #  n.b.  the (") marks it as text, it does not get output
    #
    #    2) local redirects
    #ErrorDocument 404 /missing.html
    #  to redirect to local URL /missing.html
    #ErrorDocument 404 /cgi-bin/missing_handler.pl
    #  N.B.: You can redirect to a script or a document using server-side-includes.
    #
    #    3) external redirects
    #ErrorDocument 402 http://some.other_server.com/subscription_info.html
    #  N.B.: Many of the environment variables associated with the original
    #  request will *not* be available to such a script.
    
    <IfModule mod_setenvif.c>
        #
        # The following directives modify normal HTTP response behavior.
        # The first directive disables keepalive for Netscape 2.x and browsers that
        # spoof it. There are known problems with these browser implementations.
        # The second directive is for Microsoft Internet Explorer 4.0b2
        # which has a broken HTTP/1.1 implementation and does not properly
        # support keepalive when it is used on 301 or 302 (redirect) responses.
        #
        BrowserMatch "Mozilla/2" nokeepalive
        BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
    
        #
        # The following directive disables HTTP/1.1 responses to browsers which
        # are in violation of the HTTP/1.0 spec by not being able to grok a
        # basic 1.1 response.
        #
        BrowserMatch "RealPlayer 4\.0" force-response-1.0
        BrowserMatch "Java/1\.0" force-response-1.0
        BrowserMatch "JDK/1\.0" force-response-1.0
    </IfModule>
    
    
    # If the perl module is installed, this will be enabled.
    <IfModule mod_perl.c>
      Alias /perl/ /var/www/perl/
      <Location /perl>
        SetHandler perl-script
        PerlHandler Apache::Registry
        Options +ExecCGI
      </Location>
    </IfModule>
    
    #
    # Allow http put (such as Netscape Gold's publish feature)
    # Use htpasswd to generate /etc/apache/passwd.
    # You must unremark these two lines at the top of this file as well:
    #LoadModule put_module		modules/mod_put.so
    #
    #Alias /upload /tmp
    #<Location /upload>
    #    EnablePut On
    #    AuthType Basic
    #    AuthName Temporary
    #    AuthUserFile /etc/apache/passwd
    #    EnableDelete Off
    #    umask 007
    #    <Limit PUT>
    #	require valid-user
    #    </Limit>
    #</Location>
    
    #
    # Allow server status reports, with the URL of http://servername/server-status
    # Change the ".your_domain.com" to match your domain to enable.
    #
    #<Location /server-status>
    #    SetHandler server-status
    #    Order deny,allow
    #    Deny from all
    #    Allow from .your_domain.com
    #</Location>
    
    #
    # Allow remote server configuration reports, with the URL of
    #  http://servername/server-info (requires that mod_info.c be loaded).
    # Change the ".your_domain.com" to match your domain to enable.
    #
    #<Location /server-info>
    #    SetHandler server-info
    #    Order deny,allow
    #    Deny from all
    #    Allow from .your_domain.com
    #</Location>
    
    # Allow access to local system documentation from localhost.
    # (Debian Policy assumes /usr/share/doc is "/doc/", at least from the localhost.)
    Alias /doc/ /usr/share/doc/
    
    <Location /doc>
      order deny,allow
      deny from all
      allow from 127.0.0.0/255.0.0.0
      Options Indexes FollowSymLinks MultiViews
    </Location>
    
    #
    # There have been reports of people trying to abuse an old bug from pre-1.1
    # days.  This bug involved a CGI script distributed as a part of Apache.
    # By uncommenting these lines you can redirect these attacks to a logging 
    # script on phf.apache.org.  Or, you can record them yourself, using the script
    # support/phf_abuse_log.cgi.
    #
    #<Location /cgi-bin/phf*>
    #    Deny from all
    #    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
    #</Location>
    
    <IfModule mod_proxy.c>
        #
        # Proxy Server directives. Uncomment the following lines to
        # enable the proxy server:
        #
        #<IfModule mod_proxy.c>
        #ProxyRequests On
        #
        #<Directory proxy:*>
        #    Order deny,allow
        #    Deny from all
        #    Allow from .your_domain.com
        #</Directory>
    </IfModule>
    
    #
    # Enable/disable the handling of HTTP/1.1 "Via:" headers.
    # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
    # Set to one of: Off | On | Full | Block
    #
    #ProxyVia On
    
    #
    # To enable the cache as well, edit and uncomment the following lines:
    # (no cacheing without CacheRoot)
    #
    #CacheRoot "/var/cache/apache"
    #CacheSize 5
    #CacheGcInterval 4
    #CacheMaxExpire 24
    #CacheLastModifiedFactor 0.1
    #CacheDefaultExpire 1
    #NoCache a_domain.com another_domain.edu joes.garage_sale.com
    
    #</IfModule>
    # End of proxy directives.
    
    ### Section 3: Virtual Hosts
    #
    # VirtualHost: If you want to maintain multiple domains/hostnames on your
    # machine you can setup VirtualHost containers for them.
    # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
    # for further details before you try to setup virtual hosts.
    # You may use the command line option '-S' to verify your virtual host
    # configuration.
    
    #
    # If you want to use name-based virtual hosts you need to define at
    # least one IP address (and port number) for them.
    #
    #NameVirtualHost 12.34.56.78:80
    #NameVirtualHost 12.34.56.78
    
    #
    # VirtualHost example:
    # Almost any Apache directive may go into a VirtualHost container.
    #
    #<VirtualHost ip.address.of.host.some_domain.com>
    #    ServerAdmin webmaster@host.some_domain.com
    #    DocumentRoot /www/docs/host.some_domain.com
    #    ServerName host.some_domain.com
    #    ErrorLog logs/host.some_domain.com-error.log
    #    CustomLog logs/host.some_domain.com-access.log common
    #</VirtualHost>
    
    #<VirtualHost _default_:*>
    #</VirtualHost>
    Include /etc/phpmyadmin/apache.conf
    No one has any right to force data on you
    and command you to believe it or else.
    If it is not true for you, it isn't true.

    LRH

  2. #2
    SG Enthusiast
    Join Date
    Jan 2001
    Location
    DC
    Posts
    4,717
    Are you trying to use SSI within php? Won't work as the php engine will parse everything between the php tags - and include() is a php function as you call it in your code. include in php doesn't actually execute the code, but makes it available from your main script (variables, functions, etc).

    Using SSI, you'd want something more like <!--#include virtual="/left_nav.php" --> WITHOUT the enclosing php tages.

    do you use PEAR classes? try googling for patTemplate - it would be cleaner and more flexible for creating templates. SSI is fine for very basic stuff - made for those who can't or won't learn CGI or php, but want dates, hit counters, and other simpel dynamic data. For static data (menu) I'd use templating instead.

    Skye

    EDIT: NM - got ahead of myself
    Last edited by cyberskye; 02-19-05 at 03:35 PM.
    anything is possible - nothing is free


    Quote Originally Posted by Blisster
    It *would* be brokeback bay if I in fact went and hung out with Skye and co (did I mention he is teh hotness?)

  3. #3
    Elite Member TonyT's Avatar
    Join Date
    Jan 2000
    Location
    Fairfax, VA
    Posts
    10,336
    OK.
    I use <?php include('left_nav.php'); ?> at another site hosted elsewhere and that command works to embed php in html files. That's all I really want to do.

    I've read about apache includes and may have confused it with php includes. Either way, HOW do I get that code to work on my server? Must I edit the php.ini file? Like I said earlier, I can run a php file from the server and it works by itself, but php does not work when embedded as such in html files.

    I can type the url 192.168.1.3/any_script.php and the browser will render it, but if an html files uses <?php include('any_script.php'); ?> then the php script does not render in the browser.
    No one has any right to force data on you
    and command you to believe it or else.
    If it is not true for you, it isn't true.

    LRH

  4. #4
    SG Enthusiast
    Join Date
    Jan 2001
    Location
    DC
    Posts
    4,717
    Logically you should go the other way - create a file that has all your html in it that is called from php - not teh other way around.

    so your index.php file would start off like:

    PHP Code:
    <?php
    include("menu.inc.php");
    ?>

    .......main page content in html (not the menu stuff)

    <?php
    include("footer.inc.php")
    ?>
    menu.inc.php - would include your <html><head><title>....etc, as well as your 'leftnav' content. That's tyhe easiest way to create a templet in php. You can reuse menu.inc.php at the top of each script. footer.inc.php will contain all your closing html tags.


    Skye
    anything is possible - nothing is free


    Quote Originally Posted by Blisster
    It *would* be brokeback bay if I in fact went and hung out with Skye and co (did I mention he is teh hotness?)

  5. #5
    SG Enthusiast
    Join Date
    Jan 2001
    Location
    DC
    Posts
    4,717
    BTW - apache and php include are different things, though for very simple tasks you can use them for the same purpose.

    Since you're using php already, I would recommend not using apache SSI as well.
    anything is possible - nothing is free


    Quote Originally Posted by Blisster
    It *would* be brokeback bay if I in fact went and hung out with Skye and co (did I mention he is teh hotness?)

  6. #6
    SG Enthusiast
    Join Date
    Jan 2001
    Location
    DC
    Posts
    4,717
    Quote Originally Posted by TonyT
    OK.
    but php does not work when embedded as such in html files.

    I can type the url 192.168.1.3/any_script.php and the browser will render it, but if an html files uses <?php include('any_script.php'); ?> then the php script does not render in the browser.
    if you name a file with .html extension, it is parsed as html, not php. You must use the php extension or change your httpd.conf AddType directive to have php parse .html files as well.
    anything is possible - nothing is free


    Quote Originally Posted by Blisster
    It *would* be brokeback bay if I in fact went and hung out with Skye and co (did I mention he is teh hotness?)

  7. #7
    Elite Member TonyT's Avatar
    Join Date
    Jan 2000
    Location
    Fairfax, VA
    Posts
    10,336
    Yeah, I realize that, and that way does work as desired, but the reason I want to be able to use .html is so search engines will be more receptive to indexing it.

    I'd also have to then change all the links throughout the site, a task I wish to avoid.
    No one has any right to force data on you
    and command you to believe it or else.
    If it is not true for you, it isn't true.

    LRH

  8. #8
    SG Enthusiast
    Join Date
    Jan 2001
    Location
    DC
    Posts
    4,717
    If you have a site that parses html files as php, then the config must've been changed to something like:
    Code:
    AddType application/x-httpd-php .php .html
    EDIT - point being that you must tell apache to send the page to the php engine for processing - otehrwise, it will serve the html itself (making embedded php tags useless; if not visible)
    anything is possible - nothing is free


    Quote Originally Posted by Blisster
    It *would* be brokeback bay if I in fact went and hung out with Skye and co (did I mention he is teh hotness?)

  9. #9
    Elite Member TonyT's Avatar
    Join Date
    Jan 2000
    Location
    Fairfax, VA
    Posts
    10,336
    That's what I fiqured, but that then means that all html files get parsed by apache, which could potentially really slow down a big site.

    This baffles me cause I can't even get this to work as a workaround:
    <p><script type="javascript" src="left_nav.js"></p>

    That would be even bettter cause it uses the clients resources and I can still have one menu that I have to edit for all pages, but that doesn't work either.

    left_nav.js :

    Code:
    document.write("<b>xxxxxxxxxx</b><br>");
    document.write("<a class='left_nav' href='xxxxxxxxxx.html' target='_top'>The xxxxxxxxxx:</a><br>");
    document.write("&nbsp;&nbsp;&nbsp;<a class='left_nav' href='xxxxxxxxxx.html#con_man' target='_top'>The Con Man</a><br>");
    document.write("&nbsp;&nbsp;&nbsp;<a class='left_nav' href='xxxxxxxxxx.html#neo_nazi' target='_top'>The Neo-Nazi</a><br>");
    document.write("&nbsp;&nbsp;&nbsp;<a class='left_nav' href='xxxxxxxxxx.html#denial' target='_top'>The Anti-Semite</a><br>");
    document.write("&nbsp;&nbsp;&nbsp;<a class='left_nav' href='xxxxxxxxxx.html#anarchy' target='_top'>The Anarchist</a><br>");
    document.write("&nbsp;&nbsp;&nbsp;<a class='left_nav' href='xxxxxxxxxx.html#cukoo' target='_top'>The Psychotic</a><br>");
    document.write("&nbsp;&nbsp;&nbsp;<a class='left_nav' href='xxxxxxxxxx.html#drugs' target='_top'>The Drug Addict</a><br>");
    document.write("<a class='left_nav' href='faqs.html' target='_top'>FAQs</a><br>");
    document.write("<a class='left_nav' href='about.html' target='_top'>About</a><br>");
    document.write("<a class='left_nav' href='contact.html' target='_top'>Contact</a><br>");
    document.write("<a class='left_nav' href='help.html' target='_top'>Help</a>");
    No one has any right to force data on you
    and command you to believe it or else.
    If it is not true for you, it isn't true.

    LRH

  10. #10
    SG Enthusiast
    Join Date
    Jan 2001
    Location
    DC
    Posts
    4,717
    Can't help you with the js stuff. I can tell you that from a serverside language perspective, you can't have it both ways - php cannot process part of the page only. You are correct about the potential hit, but then again, calling an external file (open, assign handle, render) will also give you a performance hit.

    You could just dump php for this site and use SSI for the menu

    <!--#include virtual="/left_nav.php" -->

    where left_nav.php includes all the required html:

    "
    <a class='left_nav' href='xxxxxxxxxx.html' target='_top'>The xxxxxxxxxx:</a><br>

    "

    you can then use .shtml as the extension (or whatever you defined in your AddHandler statement.

    In any case, apache will not process server side code within a .html file unless you tweak the config.
    anything is possible - nothing is free


    Quote Originally Posted by Blisster
    It *would* be brokeback bay if I in fact went and hung out with Skye and co (did I mention he is teh hotness?)

  11. #11
    Elite Member TonyT's Avatar
    Join Date
    Jan 2000
    Location
    Fairfax, VA
    Posts
    10,336
    Got my jaavascript menu to work.
    I forgot to put this in my .js file:

    Code:
    <!-- Hide this menu script from older browsers
    {
    document.write("blah blah");
    }
    // End -->
    No one has any right to force data on you
    and command you to believe it or else.
    If it is not true for you, it isn't true.

    LRH

Similar Threads

  1. Apache & PHP4 for Windows Needed
    By TonyT in forum Software Forum
    Replies: 3
    Last Post: 01-26-05, 08:45 PM
  2. Apache setup on Linux
    By Jon in forum Software Forum
    Replies: 1
    Last Post: 11-27-01, 09:29 PM
  3. Apache Startup Help
    By powerfulsquid in forum Software Forum
    Replies: 0
    Last Post: 10-03-01, 05:33 PM
  4. Apache Server Help.
    By powerfulsquid in forum Programming Forum
    Replies: 1
    Last Post: 07-19-01, 08:05 PM
  5. Apache Server Help.
    By powerfulsquid in forum Software Forum
    Replies: 5
    Last Post: 07-19-01, 07:58 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •