Results 1 to 2 of 2

Thread: Netgear WGT624v2 MTU Problem With PPPoE

  1. #1
    Junior Member
    Join Date
    Feb 2005
    Posts
    1

    Exclamation Netgear WGT624v2 MTU Problem With PPPoE

    OK I know this is kind of long and complicated but please read the whole thing.

    First my setup

    Netgear WGT624v2 wireless router
    Hardware Version V3 (according to router config page)
    Firmware Version V4.2.6_1.0.1

    Connected to Covad 1.5Mb DSL though Broadxent 8012-V DSL modem
    One computer connected directly to router running Win XP SP2,
    two others though wireless, one running Win XP SP2, and the other running Win 98SE,
    all 3 computers exhibit this problem.


    The problem is that according to these two web sites

    speedguide.net - TCP-IP Analyzer
    http://www.speedguide.net/analyzer.php

    broadbandreports.com - Tweak Test
    http://www.broadbandreports.com/tweaks

    My MTU is 40 bytes lower than what is set in the router config.
    For example, I set the MTU to 1492 for my PPPoE connection and these two sites say its set at 1452

    The weird thing is if I use the ping command and ping a website with the -F (donít fragment packet) and -L 1464 (sends a 1464 byte packet) flags, it gets though with no problem
    (1464 bytes + 28 byte icmp header = 1492 MTU)

    So Iím not sure which is more accurate and why Iím getting this discrepancy.

    Also I would like to note that without the router I do not have this problem.


    Here are my test results at broadbandreports.com

    MTU set in router options at 1492
    http://ttester.broadbandreports.com/...ia=routerpppoe

    MTU set in router options at 1400
    http://ttester.broadbandreports.com/...ia=routerpppoe

    Connected without WGT624v2 router using RASPPPoE
    http://ttester.broadbandreports.com/...P&via=raspppoe

    My test results at speedguide.net are pretty much the same


    Iíve also connected my router to my brother in lawís Comcast cable and both sites say the MTU was 1500 just what it should be for cable internet.

    So it seems that this is only a problem with PPPoE connections and this router, or maybe just a weird problem with this router and my isp.


    Iíve also used a packet sniffer program and verified that the maximum tcp packet sizes being sent and received from my computer are 1452 bytes with the odd exception of icmp ping packets being at most 1492 bytes.


    Also note that if I set my MTU on my computer though the registry to more than 40 bytes lower that what is set in the router config my these sites correctly say my MTU is what is set in the registry.


    Anyways to recap my router is causing my MTU to be 40 bytes lower than whatever I set it at in the routers configuration.

    Because a MTU of 1452 isnít the most optimal and my router simply isnít doing what I want it to I would like to get this fixed if possible.

    If anyone here has any suggestions on how to fix this or have had this problem themselves with this router or any others for that matter Iíd like to hear from you, because so far the post I made on netgears web forum hasnít been productive.

    My post on netgears forum
    http://forum1.netgear.com/support/viewtopic.php?t=3500

  2. #2
    SG Enthusiast
    Join Date
    Mar 2002
    Location
    Poland
    Posts
    1,107

    MTU stuck in PPPoE client router Netgear WGT624v2

    patinsj welcome on SG Forum
    it seems that is MTU stuck
    the problem with PPPoE client in several Netgear routers
    also yours : Netgear WGT624 v2
    It is still remained UNSOLVED problem.
    see thread MTU Size http://forums.speedguide.net/showthread.php?t=165238 link

Similar Threads

  1. HELP!! Adjust mtu in netgear router giving weird results???
    By X-Nemesis in forum General Broadband Forum
    Replies: 0
    Last Post: 02-10-03, 10:33 AM
  2. MTU Help...registry tweak not working
    By X-Nemesis in forum Broadband Tweaks Help
    Replies: 7
    Last Post: 10-13-02, 11:05 AM
  3. Xp Mtu 1492 For Pppoe??
    By EvilAjax in forum Broadband Tweaks Help
    Replies: 14
    Last Post: 10-10-01, 10:33 AM
  4. PPPoE MTU in Windows XP
    By Bob Carrick in forum Broadband Tweaks Help
    Replies: 13
    Last Post: 10-01-01, 02:46 PM
  5. DSL PPPoE Users: Help Guide.
    By EvilAjax in forum Broadband Tweaks Help
    Replies: 0
    Last Post: 09-29-01, 04:56 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •