Results 1 to 7 of 7

Thread: My High Speed Sympatico Downloads at 10.00kb/s! How do I boost The speed? Please Help

  1. #1
    Omega_20
    Guest

    Angry My High Speed Sympatico Downloads at 10.00kb/s! How do I boost The speed? Please Help

    I've had High Speed Sympatico for 2 years and not a change has happend. The max I download at is 10.00kb/s per sec!
    Does Anyone know of any way to boost the Speed?!

  2. #2
    Reigning Genious aagiants's Avatar
    Join Date
    Jan 2001
    Posts
    5,944

    Post

    oh man that is slow. call them up and complain.
    .....

  3. #3
    Omega_20
    Guest

    Unhappy

    I did
    but all they did was screw it up even more

  4. #4
    EvilAjax
    Guest

    Post

    We can help you. System Specs please, and while you're at it. Please go here and copy and paste the results **WITHOUT** your IP Address. Welcome to the board

  5. #5
    New Member flip's Avatar
    Join Date
    Apr 2001
    Location
    Ont. Canada
    Posts
    33

    Post

    Im with Sympatico too (Windsor). How far is the nearest Bell Canada switch that is DSL capable.

  6. #6
    Omega_20
    Guest

    Post

    TCP options string = 0204058601010402

    MTU = 1454
    MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput.

    MSS = 1414
    Maximum useful data in each packet = 1414, which is equal to MSS.
    MSS is not fully optimized for broadband (although it might work well for slower connections). Consider increasing your MTU value.

    Default Receive Window (RWIN) = 65535
    RWIN Scaling (RFC1323) = 0 bits
    Unscaled Receive Window = 65535
    Note: Under Windows 9x, if you have RWIN set to any other value, and the Analyzer reports 65535 you might need to install the MS Vtcp386 fix.
    For optimum performance, consider changing RWIN to a multiple of MSS.
    Other values for RWIN that might work well with your current MTU/MSS:
    520352 (MSS x 46 * scale factor of 8)
    260176 (MSS x 46 * scale factor of 4)
    130088 (MSS x 46 * scale factor of 2)
    65044 (MSS x 46)

    bandwidth * delay product:
    Your RcvWindow limits you to: 2621.4 kbps (327.675 KBytes/s) @ 200ms
    Your RcvWindow limits you to: 1048.56 kbps (131.07 KBytes/s) @ 500ms

    MTU Discovery (RFC1191) = OFF

    Time to live left = 48 hops
    TTL value is ok.

    Timestamps (RFC1323) = OFF

    Selective Acknowledgements (RFC2018) = ON

  7. #7
    New Member flip's Avatar
    Join Date
    Apr 2001
    Location
    Ont. Canada
    Posts
    33

    Post

    That 1554 MTU I will bet that after you change it in the reg yourself or with cablenut you will stil get 1554. let me know after you do all the patches and fix your reg


    MTU = 1492
    MTU seems to be optimized for PPPoE... If you are not on a PPPoE connection, consider increasing your MTU to 1500 for optimal throughput.

    MSS = 1452
    Maximum useful data in each packet = 1452, which is equal to MSS.
    MSS is optimized for PPPoE. If you are not on a PPPoE connection, consider increasing your MTU value.

    Default Receive Window (RWIN) = 524176
    RWIN Scaling (RFC1323) = 3 bits
    Unscaled Receive Window = 65522
    For optimum performance, consider changing RWIN to a multiple of MSS.
    Other values for RWIN that might work well with your current MTU/MSS:
    511104 (MSS x 44 * scale factor of 8)
    255552 (MSS x 44 * scale factor of 4)
    127776 (MSS x 44 * scale factor of 2)
    63888 (MSS x 44)

    bandwidth * delay product:
    Your RcvWindow limits you to: 20967.04 kbps (2620.88 KBytes/s) @ 200ms
    Your RcvWindow limits you to: 8386.816 kbps (1048.352 KBytes/s) @ 500ms

    MTU Discovery (RFC1191) = ON

    Time to live left = 47 hops
    TTL value is ok.

    Timestamps (RFC1323) = OFF

    Selective Acknowledgements (RFC2018) = ON

    IP type of service field (RFC1349)= 00000000

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •