resetting admin password

**mountainman** · 11-13-04, 12:18 PM

How do I reset my password on the Linsys WAP54G?

Thanks.

**Set** · 11-13-04, 12:35 PM

There should be a reset button (Looks like a little hole) on the back.. Hold that down for 30 sec or so

Should do the trick

**Set** · 11-13-04, 12:38 PM

Off there site

"changed the routers password, and I forgot what I changed it to. Is there anything I can do?

Answer

Hold the reset button on the unit for 30 seconds or more and the router will be restored to factory defaults. This also means that your configuration will be set to factory defaults also, so if your router is configured for your ISP you may loose your connection until you set the unit up again. The default password for the router is admin in lower case letters""

**mountainman** · 11-13-04, 12:38 PM

OK... I gave it a solid 20 since the manual said 10 will reset back to factory settings.

I'll go a solid 30 this time.

**Blisster** · 11-13-04, 12:40 PM

i think it needs to be plugged in while you do it too.

**Set** · 11-13-04, 12:41 PM

Originally Posted by mountainman

OK... I gave it a solid 20 since the manual said 10 will reset back to factory settings.

I'll go a solid 30 this time.

Yea its a crap shoot... Make sure it has power to it tho

**Set** · 11-13-04, 12:42 PM

Originally Posted by Blisster

i think it needs to be plugged in while you do it too.

Stop Reading my mind

"puts on tin foil hat""

**mountainman** · 11-13-04, 12:42 PM

Crap! I finally plugged it in....

J/k..

I got it reset and up and going. Thanks!

(It was throwing me off cuz there is no username. Just a password.)

Thanks, y'all!