Results 1 to 3 of 3

Thread: Registry setting and analizer different

  1. #1
    Regular Member reeo's Avatar
    Join Date
    Jul 2001
    Location
    Phx, AZ
    Posts
    124

    Registry setting and analizer different

    I installed the tweaks as per an earlier post several days ago. But when I checked on the analizer it's not the same.

    Here is the results



    TCP properties for IP = ()
    Browser/OS = Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.1.4322)
    Notes: Read the Analyzer FAQ if the above is not your IP address.

    TCP options string = 020405b401010402
    MTU = 1500
    MTU is fully optimized for broadband.
    MSS = 1460
    Maximum useful data in each packet = 1460, which equals MSS.

    Default Receive Window (RWIN) = 17520
    RWIN Scaling (RFC1323) = 0 bits
    Unscaled Receive Window = 17520

    RWIN is a multiple of MSS
    Other values for RWIN that might work well with your current MTU/MSS:
    513920 (MSS x 44 * scale factor of 8)
    256960 (MSS x 44 * scale factor of 4)
    128480 (MSS x 44 * scale factor of 2)
    64240 (MSS x 44)
    bandwidth * delay product (Note this is not a speed test):

    Your RcvWindow limits you to: 700.8 kbps (87.6 KBytes/s) @ 200ms
    Your RcvWindow limits you to: 280.32 kbps (35.04 KBytes/s) @ 500ms
    Consider increasing your RWIN value to optimize TCP/IP for broadband.
    MTU Discovery (RFC1191) = ON
    Time to live left = 117 hops

    TTL value is ok.
    Timestamps (RFC1323) = OFF
    Selective Acknowledgements (RFC2018) = ON
    IP type of service field (RFC1349) = 00000000



    It shows the RWIN to be 17520 here on the analizer.

    In cable nut adjuster it shows default receive window at 38400 and the send window at 32768.

    What's going on and what am I missing? I did save to regisry and rebooted. I'm confused

    reeo

  2. #2
    fem the retarded rabbit mccoffee's Avatar
    Join Date
    Nov 2001
    Location
    Cleveland, Ohio, United States
    Posts
    13,365
    in 2k/xp the default recive window is the tcp window size.

    so basiclly in 2k/xp tcp window size is the setting the analyzer looks at.

    Your settings are fine
    Comptia a+ n+

  3. #3
    Regular Member reeo's Avatar
    Join Date
    Jul 2001
    Location
    Phx, AZ
    Posts
    124
    OK, thanks it just seemed to small of a number so i thought it wasn't being entered incorrect.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •