Results 1 to 2 of 2

Thread: Help Check

  1. #1
    Advanced Member MagicMikey's Avatar
    Join Date
    Aug 2000
    Posts
    617

    Help Check

    Hey, it's been a while since I really tweaked my connection. I kind of forgot a few things, that's why I need your help...



    ISP download: 3.1 Mbps
    ISP upload: 320 kbps



    MTU = 1500
    MTU is fully optimized for broadband.
    MSS = 1460
    Maximum useful data in each packet = 1460, which equals MSS.

    Default Receive Window (RWIN) = 256960
    RWIN Scaling (RFC1323) = 2 bits (scale factor of 4)
    Unscaled Receive Window = 64240

    RWIN is a multiple of MSS
    Other values for RWIN that might work well with your current MTU/MSS:
    513920 (MSS x 44 * scale factor of 8)
    128480 (MSS x 44 * scale factor of 2)
    64240 (MSS x 44)
    bandwidth * delay product:

    Your RcvWindow limits you to: 10278.4 kbps (1284.8 KBytes/s) @ 200ms
    Your RcvWindow limits you to: 4111.36 kbps (513.92 KBytes/s) @ 500ms
    MTU Discovery (RFC1191) = ON
    Time to live left = 53 hops

    TTL value is ok.
    Timestamps (RFC1323) = OFF
    Selective Acknowledgements (RFC2018) = ON
    IP type of service field (RFC1349) = 00000000




    AMD Ahtlon XP 2700+ (2.17GHz)
    EPoX 8RDA+ (nForce2)
    2x256MB Corsair 3200 Dual-DDR Cas 2
    80GB Western Digital ATA-100 7200rpm
    60GB Maxtor ATA-133 7200rpm
    GeForce4 ti4200 128MB (315/600)
    Antec 430w TruePower PSU




    Thanks!

  2. #2
    fem the retarded rabbit mccoffee's Avatar
    Join Date
    Nov 2001
    Location
    Cleveland, Ohio, United States
    Posts
    13,365
    Try the following in cablenut



    DefaultReceiveWindow 384000
    DefaultSendWindow = 49152
    DisableAddressSharing = 1
    InitialLargeBufferCount = 100
    InitialMediumBufferCount = 240
    InitialSmallBufferCount = 320
    LargeBufferSize = 81920
    MaxFastTransmit = 64000
    MediumBufferSize = 15040
    PriorityBoost = 0
    SmallBufferSize = 1280
    TransmitWorker = 32
    FastSendDatagramThreshold = 4096
    EnableFastRouteLookup = 1
    EnablePMTUDiscovery = 1
    IgnorePushBitOnReceives = 0
    GlobalMaxTcpWindowSize =leave blank
    MaxFreeTcbs = 8000
    MaxHashTableSize = 16384
    MaxNormLookupMemory = 5000000
    SackOpts = 1
    SynAttackProtect = 1
    Tcp1323Opts = 1
    TcpLogLevel = 1
    TcpMaxDupAcks = 3
    TcpMaxHalfOpen = 100
    TcpMaxHalfOpenRetried = 80
    TcpRecvSegmentSize = 1460
    TcpSendSegmentSize = 1460
    TcpTimedWaitDelay = 30
    TcpUseRFC1122UrgentPointer = 0
    TcpWindowSize leave blank
    MaxConnectionsPer1_0Server = 20
    MaxConnectionsPerServer = 10
    DefaultTTL = 64
    DisableUserTOSSetting = 0
    TcpMaxDataRetransmissions = 6
    DefaultTOSValue = 92





    Co/o manosteele52

    . Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.

    2. Open IE and select tools - internet options - connections -
    LAN settings, make sure NOTHING there is checked.

    3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.

    4. Clear your temporary internet files.

    5. Power cycle your modem, unplug it for atleast 15 seconds.

    6. Download and update then do a scan with SpyBot 1.2 http://beam.to/spybotsd & Ad Aware 6.0 http://www.lavasoftusa.com/support/download to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES.

    7. Make sure you do the faster web page tweak in Read1st link.

    8. If you have Zone Alarm as a firewall uninstall it then visit Zonelabs.com for further instructions on removing it's left over junk.

    9. Install Outpost Firewall http://www.agnitum.com/products/outpost or Sygate Firewall http://www.sygate.com/, both have FREE and Pro versions and are heads above ZA.

    10. Scan for viruses with your antivirus app, if you do not have one get one IMMEDIATELY, AVG 6.0 http://www.grisoft.com/us/us_dwnl_free.php is an excellent FREE AV app.

    11. Make sure you have ALL of the latest Windows Updates.
    Comptia a+ n+

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •