Results 1 to 2 of 2

Thread: time warner

  1. #1
    Advanced Member Ronny's Avatar
    Join Date
    Nov 2000
    Location
    Kannapolis,NC
    Posts
    690

    time warner

    can any improvements be made here.pages still load a little slow.

    running windows xp home
    cable connection thru time warner to earthlink

    down load 3000 upload is 384 i believe

    TCP options string = 020405b40103030301010402
    MTU = 1500
    MTU is fully optimized for broadband.
    MSS = 1460
    Maximum useful data in each packet = 1460, which equals MSS.

    Default Receive Window (RWIN) = 384000
    RWIN Scaling (RFC1323) = 3 bits (scale factor of 6)
    Unscaled Receive Window = 48000

    For optimum performance, consider changing RWIN to a multiple of MSS.
    Other values for RWIN that might work well with your current MTU/MSS:
    513920 (MSS x 44 * scale factor of 8)
    256960 (MSS x 44 * scale factor of 4)
    128480 (MSS x 44 * scale factor of 2)
    64240 (MSS x 44)
    bandwidth * delay product:

    Your RcvWindow limits you to: 15360 kbps (1920 KBytes/s) @ 200ms
    Your RcvWindow limits you to: 6144 kbps (768 KBytes/s) @ 500ms
    MTU Discovery (RFC1191) = ON
    Time to live left = 54 hops

    TTL value is ok.
    Timestamps (RFC1323) = OFF
    Selective Acknowledgements (RFC2018) = ON
    IP type of service field (RFC1349) = 00000000

  2. #2
    fem the retarded rabbit mccoffee's Avatar
    Join Date
    Nov 2001
    Location
    Cleveland, Ohio, United States
    Posts
    13,365
    Try the following in cablenut which is below me to download and install

    DefaultReceiveWindow =384000
    DefaultSendWindow = 49152
    DisableAddressSharing = 1
    InitialLargeBufferCount = 100
    InitialMediumBufferCount = 240
    InitialSmallBufferCount = 320
    LargeBufferSize = 81920
    MaxFastTransmit = 64000
    MediumBufferSize = 15040
    PriorityBoost = 0
    SmallBufferSize = 1280
    TransmitWorker = 32
    FastSendDatagramThreshold = 4096
    EnableFastRouteLookup = 1
    EnablePMTUDiscovery = 1
    IgnorePushBitOnReceives = 0
    GlobalMaxTcpWindowSize = Leave blank
    MaxFreeTcbs = 8000
    MaxHashTableSize = 16384
    MaxNormLookupMemory = 5000000
    SackOpts = 1
    SynAttackProtect = 1
    Tcp1323Opts = 1
    TcpLogLevel = 1
    TcpMaxDupAcks = 3
    TcpMaxHalfOpen = 100
    TcpMaxHalfOpenRetried = 80
    TcpRecvSegmentSize = 1460
    TcpSendSegmentSize = 1460
    TcpTimedWaitDelay = 30
    TcpUseRFC1122UrgentPointer = 0
    TcpWindowSize = Leave blank
    MaxConnectionsPer1_0Server = 20
    MaxConnectionsPerServer = 10
    DefaultTTL = 64
    DisableUserTOSSetting = 0
    TcpMaxDataRetransmissions = 6
    DefaultTOSValue = 92


    Co/o manosteele52

    . Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.

    2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.

    3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.

    4. Clear your temporary internet files.

    5. Power cycle your modem, unplug it for atleast 15 seconds.

    6. Download and update then do a scan with SpyBot 1.2 http://beam.to/spybotsd & Ad Aware 6.0 http://www.lavasoftusa.com/support/download to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES.

    7. Make sure you do the faster web page tweak in Read1st link.

    8. If you have Zone Alarm as a firewall uninstall it then visit Zonelabs.com for further instructions on removing it's left over junk.

    9. Install Outpost Firewall http://www.agnitum.com/products/outpost or Sygate Firewall http://www.sygate.com/, both have FREE and Pro versions and are heads above ZA.

    10. Scan for viruses with your antivirus app, if you do not have one get one IMMEDIATELY, AVG 6.0 http://www.grisoft.com/us/us_dwnl_free.php is an excellent FREE AV app.

    11. Make sure you have ALL of the latest Windows Updates.
    Comptia a+ n+

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •