Results 1 to 3 of 3

Thread: Need serious help asap :(

  1. #1
    venomiza
    Guest

    Need serious help asap :(

    guys my dsl is AS FAST AS A 56k MODEM. i have Bellsouth.net and my download is supposed ot be 1.5 down. here is my results can someone help me out please? thx in advance. btw im new here
    TCP options string = 020405ac010303000101080a000000000000000001010402
    MTU = 1492
    MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
    MSS = 1452
    MSS is optimized for PPPoE DSL broadband. If not, consider raising MTU to 1500 for maximum throughput.

    Default Receive Window (RWIN) = 32767
    RWIN Scaling (RFC1323) = 0 bits
    Unscaled Receive Window = 32767

    For optimum performance, consider changing RWIN to a multiple of MSS.
    Other values for RWIN that might work well with your current MTU/MSS:
    511104 (MSS x 44 * scale factor of 8)
    255552 (MSS x 44 * scale factor of 4)
    127776 (MSS x 44 * scale factor of 2)
    63888 (MSS x 44)
    bandwidth * delay product:

    Your RcvWindow limits you to: 1310.68 kbps (163.835 KBytes/s) @ 200ms
    Your RcvWindow limits you to: 524.272 kbps (65.534 KBytes/s) @ 500ms
    MTU Discovery (RFC1191) = ON
    Time to live left = 114 hops

    TTL value is ok.
    Timestamps (RFC1323) =
    Timestamps (RFC1323) = ON
    Note: Timestamps add 12 bytes to the TCP header of each packet, reducing the space available for useful data.

    Selective Acknowledgements (RFC2018) = ON
    IP type of service field (RFC1349) = 11100000

    Precedence (priority) = 000 (routine)
    Delay = 0 (normal delay)
    Throughput = 0 (normal throughput)
    Reliability = 1 (high reliability)
    Cost = 1 (low cost)

  2. #2
    Dr Tweak mnosteele52's Avatar
    Join Date
    Jul 2001
    Location
    Chesapeake, VA
    Posts
    11,912
    Use the following settings in CableNut:

    DefaultReceiveWindow = 192000
    DefaultSendWindow = 32768
    DisableAddressSharing = 1
    InitialLargeBufferCount = 200
    InitialMediumBufferCount = 480
    InitialSmallBufferCount = 640
    LargeBufferSize = 819200
    MaxFastTransmit = 64000
    MediumBufferSize = 150400
    PriorityBoost = 0
    SmallBufferSize = 12800
    TransmitWorker = 32
    FastSendDatagramThreshold = 1024
    EnableFastRouteLookup = 1
    EnablePMTUDiscovery = 1
    IgnorePushBitsOnReceive = 0
    GlobalMaxTcpWindowSize = leave blank
    MaxFreeTcbs = 8000
    MaxHashTableSize = 16384
    MaxNormLookupMemory = 5000000
    SackOpts = 1
    SynAttackProtect = 1
    Tcp1323Opts = 1
    TcpLogLevel = 1
    TcpMaxDupAcks = 2
    TcpMaxHalfOpen = 100
    TcpMaxHalfRetried = 80
    TcpRecvSegmentSize = 1452
    TcpSendSegmentSize = 1452
    TcpTimedWaitDelay = 30
    TcpUseRFC1122UrgentPointer = 0
    TcpWindowSize = leave blank
    MaxConnectionsPer1_0Server = 20
    MaxConnectionsPerServer = 10
    DefaultTTL = 64
    DisableUserTOSSetting = 0
    TcpMaxDataRetransmissions = 6
    DefaultTOSValue = 240

    VERY IMPORTANT TO DO THE FOLLOWING

    1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.

    2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.

    3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.

    4. Clear your temporary internet files.

    5. Power cycle your modem, unplug it for atleast 15 seconds.

    6. Download and update then do a scan with SpyBot 1.2 & Ad Aware 6.0 to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES.

    7. Make sure you do the faster web page tweak in my Help & Tips link.

    8. If you have Zone Alarm as a firewall uninstall it then visit Zonelabs.com for further instructions on removing it's left over junk.

    9. Install Outpost Firewall or Sygate Firewall, both have FREE and Pro versions and are heads above ZA.

    10. Scan for viruses with your antivirus app, if you do not have one get one IMMEDIATELY, AVG 6.0 is an excellent FREE AV app.

    11. Make sure you have ALL of the latest Windows Updates.



  3. #3
    venomiza
    Guest
    thanks alot yo. my pages loading offly quick now. but i think i found the problem. i have my dsl connected USB. this is my speed test results.

    2004-01-18 01:30:26 EST: 107 / 211
    Your download speed : 107321 bps, or 107 kbps.
    A 13.1 KB/sec transfer rate.
    Your upload speed : 211304 bps, or 211 kbps.


    thats not good at all heh. i got the ethernet cable but i dont have a nic card. damn gateways . on my xbox my download speeds are fine because of the ethernet cable. im sure its the cable giving me trouble. thanks again.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •