Results 1 to 4 of 4

Thread: Am I tweaked to the max?

  1. #1
    New Member
    Join Date
    Sep 2001
    Posts
    17

    Am I tweaked to the max?

    WinXP SP1, Cable modem, mediacom online 1500mbits, speakeasy test 1440/125, going through a Linksys .11b wireless router, P4 3.06 mhz, 512megs of ram..Sguide xp default and dns patches installed..thats it..

    Browser/OS = Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)
    Notes: Read the Analyzer FAQ if the above is not your IP address.

    TCP options string = 020405b40103030201010402
    MTU = 1500
    MTU is fully optimized for broadband.
    MSS = 1460
    Maximum useful data in each packet = 1460, which equals MSS.

    Default Receive Window (RWIN) = 256960
    RWIN Scaling (RFC1323) = 2 bits (scale factor of 4)
    Unscaled Receive Window = 64240

    RWIN is a multiple of MSS
    Other values for RWIN that might work well with your current MTU/MSS:
    513920 (MSS x 44 * scale factor of 8)
    128480 (MSS x 44 * scale factor of 2)
    64240 (MSS x 44)
    bandwidth * delay product:

    Your RcvWindow limits you to: 10278.4 kbps (1284.8 KBytes/s) @ 200ms
    Your RcvWindow limits you to: 4111.36 kbps (513.92 KBytes/s) @ 500ms
    MTU Discovery (RFC1191) = ON
    Time to live left = 52 hops

    TTL value is ok.
    Timestamps (RFC1323) = OFF
    Selective Acknowledgements (RFC2018) = ON
    IP type of service field (RFC1349) = 00000000


    Give me your advice on my tweaking and if there are any other things that may help my speed..Appreciate it guys.. Josh

  2. #2
    Dr Tweak mnosteele52's Avatar
    Join Date
    Jul 2001
    Location
    Chesapeake, VA
    Posts
    11,912
    Welcome to Speedguide, please read here & here COMPLETELY AND CAREFULLY so that we can properly help you, please read it carefully since it will most likely answer any questions you may have. If after reading it you still need help please post the answers to the questions at the top.

  3. #3
    New Member
    Join Date
    Sep 2001
    Posts
    17
    I believe I have answered all questions ness. please advise me on your thoughts of my connection.. Thanks

  4. #4
    fem the retarded rabbit mccoffee's Avatar
    Join Date
    Nov 2001
    Location
    Cleveland, Ohio, United States
    Posts
    13,365
    Try thease in cablenut ur speeds look good but that rwin is kinda high try a lower one to see if you get better or same if same use the values

    DefaultReceiveWindow = 192000
    DefaultSendWindow = 16384
    DisableAddressSharing = 1
    InitialLargeBufferCount = 100
    InitialMediumBufferCount = 240
    InitialSmallBufferCount = 320
    LargeBufferSize = 81920
    MaxFastTransmit = 64000
    MediumBufferSize = 15040
    PriorityBoost = 0
    SmallBufferSize = 1280
    TransmitWorker = 32
    FastSendDatagramThreshold = 4096
    EnableFastRouteLookup = 1
    EnablePMTUDiscovery = 1
    IgnorePushBitOnReceives = 0
    GlobalMaxTcpWindowSize = 37960
    MaxHashTableSize = 16384
    MaxNormLookupMemory = 5000000
    SackOpts = 1
    SynAttackProtect = 1
    Tcp1323Opts = 0 (set to 1 if TcpReceiveWindow is 65535 or higher)
    TcpLogLevel = 1
    TcpMaxDupAcks = 3
    TcpMaxHalfOpen = 100
    TcpMaxHalfOpenRetried = 80
    TcpRecvSegmentSize = 1460
    TcpSendSegmentSize = 1460
    TcpTimedWaitDelay = 30
    TcpUseRFC1122UrgentPointer = 0
    TcpWindowSize = 37960
    MaxConnectionsPer1_0Server = 20
    MaxConnectionsPerServer = 10
    DefaultTTL = 64
    DisableUserTOSSetting = 0
    TcpMaxDataRetransmissions = 6
    DefaultTOSValue = 92


    Co/o manosteele52

    . Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.

    2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.

    3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.

    4. Clear your temporary internet files.

    5. Power cycle your modem, unplug it for atleast 15 seconds.

    6. Download and update then do a scan with SpyBot 1.2 http://beam.to/spybotsd & Ad Aware 6.0 http://www.lavasoftusa.com/support/download to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES.

    7. Make sure you do the faster web page tweak in Read1st link.

    8. If you have Zone Alarm as a firewall uninstall it then visit Zonelabs.com for further instructions on removing it's left over junk.

    9. Install Outpost Firewall http://www.agnitum.com/products/outpost or Sygate Firewall http://www.sygate.com/, both have FREE and Pro versions and are heads above ZA.

    10. Scan for viruses with your antivirus app, if you do not have one get one IMMEDIATELY, AVG 6.0 http://www.grisoft.com/us/us_dwnl_free.php is an excellent FREE AV app.

    11. Make sure you have ALL of the latest Windows Updates.
    Comptia a+ n+

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •