Results 1 to 3 of 3

Thread: which is faster?

  1. #1
    Advanced Member opmharley's Avatar
    Join Date
    Jul 2003
    Hazel Park, Michigan

    which is faster?

    i got I got an NF7 Abit motherboard and a amd athlon Barton 2500 Xp and a Radeon 9600 pro and a Corsair 512mb xms Twinx pc 3200 dual channel 400mhz.

    ok in the bios i can set the barton at 3200 speeds if i do that and i keep the ram at the default settings 8-3-3 it's stable but I also believe it is stable at 7-3-3 cas 2, but any lower and it crashes and stuff.

    currently my Barton is at 192 FSB stockcooling with 1.7 Vcore 2112 mhz I believe, witht he multi at 11. i tried taking the mutl to 11.5 and got 2208mhz which i thought was good.

    i kept getting errors. Currently with 192fsb and 11 multi and 1.7 vcore and the ram at 2.7core its frequency is 384 i think that is the max you can have at without low latency, read somewhere.

    the current timings are 5-3-2 cas 2 and its stable has been like this for a few days.

    so would i get better results with 3200 speeds and 7-3-3 timings or 192fsb and 11 multi at 5-3-2 timings i currently get around 13k 3dmarks and all i care about is the marks so what should I try?
    If you won't stand behind the troops then you can trying standing in front of them.

  2. #2
    Regular Member deksecurity's Avatar
    Join Date
    Jan 2001
    columbus,ohio, usa
    try 2-2-2-11
    ABIT NF7-S v2.0 AMD XP-Mobiles 2500+(11.5x235) OCZ 2x225(3500) fasttrak tx2000 RAID 0 ATI 9500 Softmod(9700) @400/330 used koolance to cool my vdo card antec ture 550 custom water cooler

  3. #3
    Fraternized Set's Avatar
    Join Date
    Sep 2001
    Try bumping your mem up to 2.8 Lower lats needs more volts
    Cancer Baaaaaad! Folding Goooood!


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts