SG Broadband Community

Easto

Some drives have jumpers on them to set the dma property to enable. But I don't think Maxtor does this. Take a look and see. You might want to auto detech your drive in the bios to see if that changes anything.

Easto

Save you money and wait. I run a Echo electronics Darla 24/96 sound card through a Mackie 1604vlz mixer then (optionally) through a Digitech Gsp2101 effects processor. 150W power amp and then in to a pair of Boston Acoutic bookshelf speakers. A little more than a $150 but well worth the money. Talk ...

Easto

Philanthropist and Patron of the Arts

Easto

Ragnarok, MailmanX is correct about the multiplier. I have a 500mhz PIII with PC 100 ram and have bumped mine up to 585 mhz by increasing the FSB. (without any additional cooling) and it stayed stable. But I would not suggest doing this unless you get some extra cooling. I never keep mine set that ...

Easto

Sittin' here in Los Angeles just waitin' to go home. (At Work).

Easto

PIII 500 cpu temp 142 - 145, I hit 155 with my stock sink and fan. When do I start to worry

Easto

If it's yellow it's mellow, If it's brown flush it down

Easto

I got more important things to worry about. Turn the TV off and read a book.

Easto

they have a 40 pin connector but 80 wires. Thats my understanding. And they're working

Easto

I am using the same onboard controller. Just new cables. The way I understood it was that these were "Quality" cables and would help with performance. I understand what Colour is saying about the compatibility issue... I just thought I might get a slight bump in performance

Easto

I hooked up both my Maxtor Udma 33 10gig drives to a new 80 pin Cable, removing the old stock Ide cables . I have read (and it stated on the Belkin box in the store. I did not buy them, I had some at home) that this would increase my drive performance. I have been benchmarking with "Sandra" and I do ...

Easto

2 blonds were walking through the woods when they came upon some tracks. The first blond says "They look like Bear Tracks", the second blond says "They look like Deer Track". 15 minutes later the train came by and hit them.

Easto

Everyone, Thanks for the input. Since Mjfmlv knew what the last 3 meant I'll stick with this answer. I understand what's going on here, but I don't overclock. Anyway, what is "da kind" memory to buy for stability and performance.

Thanks again for the help
Easto

Easto

thanks, I thought I was hosed since I did not find this out until after reformatting. I was reading the numbers on the disk (someone had written on them) incorrectly. Got it up and running. I guess they encrypt this on the cdrom?

Easto

How can I find it on the disk???

Easto

Brent, thanks. I had a pretty good idea that was what they were but just wanted to confirm

Thanks for the help

Easto

When I purchase memory the Stats that I get from SiSoft Sandra show Pc 100-333-622. I know that it is rated as "Pc100" memory but what do the next 2 sequences mean. I also have some "Pc 125-222-622" ???

Thanks
Easto

Easto

How well does this board handle being overclocked?

Easto

Ok, Maybe a little clearer here. If you go into your device manager (win98), expand the systems devices tab, click on the "Direct Memory Access Controller", then properties, under settings it gives you the option of setting "reserved DMA buffer". What will this do? Does anyone know or am I digging ...

Easto

Hum? Change in humidity you say...

Easto

Hey, ya know you still have 2 free memory slots? What's up with that? Ha Ha

Easto

I live on the edge, I'll keep ya posted!

Easto

In the direct memory access controller properties do I gain or lose anything by reserving the buffer and setting the Kbytes reserved to something else

. What does this mean or do?

Easto

Since I do not use any power management features with my computer am I at any risk disabling the Advanced Power Management Support in the device manager under systems Properties?

Easto

I recently purchased a Elsa Gladiac MX board. I upgraded from a VooDoo Banshee so the difference was incredible (I realize there are better boards but this one rings my bell just fine). The board loaded with the drivers on the disk but I noticed that on the disk I am given the option of loading the ...

Easto

increased airflow since the rounded cable does not restrict as much flow as a flat cable might

Easto

Thanks for your interest. And I do understand you wanting more info but I have a pretty good handle on my setup and where its going. I was just thinking along the lines of cable manufactures, fan makers etc. I know it sounds pretty simple but those were the only answers I was looking for. Once I ...

Easto

I am building a new computer (tower Case) and would like any suggestions etc on how to keep the internals orgainized and routed. I don't need any hardware suggtestions, just some ideas you may have that really worked for you like a certain connector configuration, rounded cables, weird fan setup ...

Easto

I'm In Los Angeles, Raritan is in N.J. I knew everyone would want a freebie or 2 so I'm sending 1 to everyone who responds. Yeah Right!! No theft here but I do see more computer parts than you could shake a hard drive at. One word to the wise... do not buy anything at Ubid in Memphis. A lotta junk ...

Easto

I'm the night operations manager (just a title rather than pay me more) for a domestic freight forwarder (trucking company). One thing of interest. We ship for just about any computer manufacturer you can think of. Abit, Asus, GBT(gigabyte),Tyan, Amptron and it goes on and on. You would be suprised ...

Easto

Well, you know what they say... Bigger is better!

Easto

It's what you don't here that should scare ya!

Easto

anything Sounds better than my life. I'm still at work.

Easto

I have installed some new Cas latency 2 spec memory. In my bios I have the Cas Latency set properly. How do I know if I have the Ras-Cas set properly, and the Precharge set properly. I now have all set to "2". And what exactly do these mean

SG Broadband Community

Search found 5794 matches

How hot is too hot?

80 Pin Ide Cables

Two Blonds

lost my win98 reg key

Memory Rating

Elsa Gladiac Mx

DMA Controller

Advanced Power Management

Reference Drivers

Your Best Case Tweak

Ras to Cas