Search:

Type: Posts; User: alex_barringer; Keyword(s):

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. Yes, I know this product well, as well as the...

    Yes, I know this product well, as well as the plain wired ADSL modem from Actiontec.

    Simple, the problem is not on the inside of the house it's outside, has nothing to do with your router or...
  2. I have reviewed the results of the tests on...

    I have reviewed the results of the tests on DSLReports. Something you need to know about that test set, there are computers that have the ICMP service shut off on their computers, there for if you...
  3. Sounds like your modem is setup for a static IP...

    Sounds like your modem is setup for a static IP address with a different subnet address than what you computer is set for. Most people that are not good with computers have all the equipment set for...
  4. Replies
    6
    Views
    1,599

    You could make it easy on yourself and get a...

    You could make it easy on yourself and get a modem with a router built right in, I recommend the Zoom X series wholeheartedly for ADSL users. My personal favorite that works great is a is a control...
  5. If you have these two WANs bridged you might want...

    If you have these two WANs bridged you might want to look into using the Dynamic RIP protocol to keep the DNS and routing stable as well.
  6. Replies
    12
    Views
    2,728

    Ok, one other thing, lots of people get this...

    Ok, one other thing, lots of people get this confused.

    Most network interface cards (NICs) or integrated LAN have connection speeds of 10 / 100 / 1000 Mbps (1000 Mbps = 1 Gbps). Just because you...
  7. Replies
    3
    Views
    786

    A note about MySpace, Yahoo!, and the like, they...

    A note about MySpace, Yahoo!, and the like, they like to cram their content in on JavaScript and jam your screen and memory with advertisements, if you use some of the advertisement blocking...
  8. Replies
    16
    Views
    3,591

    Sorry that I haven't been around folks for quite...

    Sorry that I haven't been around folks for quite awhile just got out of some serious surgery.

    About the QoS and QoS aware programs out there:

    As much as I hate to tell you this, there are very...
  9. Replies
    10
    Views
    1,434

    Ok, I should jump in here now. You don't reduce...

    Ok, I should jump in here now. You don't reduce the power by removing splitters, splitters actually cut the signal down, called attenuation and loss listed in decibels or dB.

    The way the...
  10. Wireless modem router, or wireless router...

    Wireless modem router, or wireless router (wireless access point), they are two different things, I assume that since you have the other modem working now you want to add in wireless functionality,...
  11. Replies
    18
    Views
    4,202

    Memory leaks in poorly designed TCP/IP stacks or...

    Memory leaks in poorly designed TCP/IP stacks or Ethernet / USB / Firewire drivers with memory leaks can cause some wild results like what you have encountered. It's most likely at one time you have...
  12. Replies
    2
    Views
    2,592

    Also read my post about if you have an ADSL modem...

    Also read my post about if you have an ADSL modem and have trouble connecting or staying connected, this is a world wide phenominom right now.
  13. Replies
    3
    Views
    1,251

    Are you operating under the administrator's...

    Are you operating under the administrator's account? If you are and when we get this fixed, make another account as a power user for your computer, this prevents people from doing very destructive...
  14. If you have ADSL and are having trouble staying connected or can't connect. * READ *

    I was notified the other day that anyone that is using ADSL modems to connect to any of these companies, that includes your ISP, since when you connect your ADSL to the phone line it actually goes to...
  15. Replies
    2
    Views
    3,849

    Ok, I will bite... You cannot assign anything to...

    Ok, I will bite... You cannot assign anything to the wireless client cards or USB interface that will not have any effect. Wireless devices DO NOT operate like their wired equivalents.

    If you...
  16. Ok I will bite! You have multiple problems going...

    Ok I will bite! You have multiple problems going on right now. Some of it is other wireless devices interfering whether they are yours or other peoples in other houses.

    1. Make sure your...
  17. Replies
    3
    Views
    1,869

    Can you show me in a diagram where the wireless...

    Can you show me in a diagram where the wireless router (access point / wireless access point) come in on your network and where other people connect in via other switches or Hubs.

    It could be that...
  18. Oh boy... You have everything on custom settings...

    Oh boy... You have everything on custom settings without knowing what that will do to your network.

    First off.

    1. You have your wireless configuration with the BSSID / SSID correctly.

    2. ...
  19. LOL, that would be one hell of a large packet...

    LOL, that would be one hell of a large packet over the MTU... Ethernet would have one hell of a time with that setting...
  20. Replies
    14
    Views
    5,811

    How true... Sniff sniff sniff, hmm you know that...

    How true... Sniff sniff sniff, hmm you know that cable is not firewire you know... something is a burning (just kidding)...
  21. Replies
    9
    Views
    2,317

    Your roomie is hogging all the bandwidth... Get...

    Your roomie is hogging all the bandwidth... Get a bandwidth shaping piece of software installed on both computers so you can share bandwidth. Look at www.cfos.com.
  22. What it appears to need is creation of a...

    What it appears to need is creation of a "profile" for the modem in the advanced configuration menu, you can enter in special information pertaining as to what ports you not only want to be available...
  23. Ok, I am looking into your problem right now...

    Ok, I am looking into your problem right now...
  24. Replies
    6
    Views
    17,155

    Question for you... When you look at your...

    Question for you...

    When you look at your modem is the Sync or Link LED (light) for your phone / cable line on solid, not flickering or blinking when this happens?

    If this stays solid, you are...
  25. Replies
    2
    Views
    753

    Make sure you are connecting to your modem at 100...

    Make sure you are connecting to your modem at 100 Mbps. Also if you are using BT's Master Socket Interface. Is this the kind with 4 wires? Like having an orange wire by chance? If it is, that is...
  26. Replies
    14
    Views
    5,811

    Simple, if your house is air conditioned and your...

    Simple, if your house is air conditioned and your cable modem is in a cool area while operating, at 80 degrees and colder (down to 38 degrees Farenheit) is a good operating temperature for it. ...
  27. That's quite strange indeed...

    I would agree on the spy / malware but his upload bandwidth is unaffected, usually both the upload and download bandwidths are affected, not one or the other.

    Do you have any bandwidth shaping...
  28. Replies
    6
    Views
    2,346

    Power Boost technology is nothing new, it has...

    Power Boost technology is nothing new, it has many different names and faces in the industry. As it was said before, it is a burstable software compression that is not meant for ongoing downloads,...
  29. When you get logged into your router, click on...

    When you get logged into your router, click on this.

    1. Applications and Gaming

    2. QoS

    3. Make sure Wireless QoS is "Enabled".

    4. Make sure No Acknoledgement is "Disabled".
  30. A note if you are not getting a response from...

    A note if you are not getting a response from your router, especially if it is D-Link, Netgear, or Linksys. There are configuration options to allow or disallow the ICMP (ping) and IGMP (trace route...
Results 1 to 30 of 66
Page 1 of 3 1 2 3