Search:

Thx Philip


Those are not applicable as I can access the device but only with specific IPs


May be


I guess no but I will double check that

Sorry Philip this is a typo meant to be 192.168.255.10

Dear folk

Using a laptop to access Nokia AirScale baseband we normally assign 192.168.255.130/24 and no issue for accessing web interface of the device

When I assigned my laptop ip address...

Noted
Thx Philip

Thx Philip
You guess it might not be doable ?

https://www.speedguide.net/forums/showthread.php?291910-ASUS-Router-Merlin-showing-two-differnt-WAN-ip-address

Hi

I had DDNS setup on my ASUS RTAC5300 Merlin firmware as per attached snapshots...

Differently this is my case now it makes seance
Thx Philip

Hi Philip

Thanks for your help and I have to admit learning a lot from your knowledge


Yes no doubt


This is something new to me and it makes sense ,,,,,,but now I have got a question

Dear folk

I have got ASUS ROUTER RTAC5300 with Merlin firmware latest version

Before I connected to VPN and thorough the website


https://whatismyipaddress.com

it was showing public ip...

I think it is a bug in the firmware and yes it does show dynamically allocated IPs
Even I can't see the printer which has static ip and while I was printing (means there is activity) I was...

Dear folk
Main router at home is ASUS RT-AC5300 Merlin (v384.19) this router has :
- ASUS PoE switch (192.168.10.2) connected wired to it
-Two other routers connected wired to it as well acting as...

What I did I downgraded the firmware from V1.0.3.50_1.0.1 to V1.0.3.44_1.0.1 (one version older) and it worked fine now can change ip address disable DHCP,,,etc

connected wired
tried to change one by one
Tried changing LAN first before DHCP no joy as router showing old ip address although i did unplug and plug power for the router
Then tried to disable...

I am getting error when changing LAN ip address /disable DHCP
I didn't get the error when I changed the router to AP mode

Tried different browsers no joy
Download firmware again and uploaded to the router still same issue
6 times so far reset been done and still no joy

Dear All

I have seen many thread like the one I am posting now but I couldn't find a cure ,,,,may be I overlooked or it is hiding somewhere on net I didn't find it
I am trying to set Netgear...

That is right we have to add a static router as it says in the same document page 46:

https://imgur.com/a/AvcQzaH

route add <Modem LAN subnet> mask <subnet mask> <VPN remote virtual IP of the...

Thx Philip


Clear


Make sense


Clear to me

Dear folks


https://www.telstra.com.au/content/dam/tcom/small-business/bundles/pdf/telstra-gateway-prov7610-configuration-guide.pdf


I have got V7610 Netgear GATEWAY and I followed the...

I tried that and it failed


I guess yes


Shouldn't be a problem

Regards

Unfortunate not


It is all in one box modem and adsl router.


https://imgur.com/a/lIinGHg

Firefox and Chrome

https://imgur.com/a/KJ5MjTR

Tried both ports 80 & 8080 no joy


Didn't let me in
www.routerlogin.net

Philip I have an issue
I was trying to troubleshoot and report back but I run into another issue
Via a team viewer I logged in into a remote computer and from that computer I can ping the ip...

Thanks Philip
I will check that and report back

Dear folk

I have a printer HP Laser Jet M5035 MFP connected wired to an ADSL router and desktop windows 10 home connected to the same router wirelessly.
The printer can't send a scanned document...

All good
Thx for sharing

By the way I have been working in DataCentre (telco companies and Business Customers ) and GSM huts belong to 3 different Telco companies for 10 years all i have been...

Thx Norm

I don't think type of Ethernet cable wiring layout (Rollover , straightthrough and crossover) has something to do with the terminology cross connect

Yes there is a common word which...

Thanks Philip

Dear folk
I have been doing some research on what does “ cross connect ” mean and this is one of term that i have yet to wrap my mind around.
I would appreciate if someone in the field could...

Thx Philip that was the issue


Yes