PDA

View Full Version : Another day, another case.



goobee
06-02-02, 03:23 AM
You can't tell from the picture but that's a 120mm blowhole on top of the case. :eek:

It just dwarfs the 92mm fan on the side of the case. There's another 120mm fan hidden inside in front of the case. :)

http://24.205.138.106:8080/stuff/120mm.jpg

goobee
06-02-02, 04:55 PM
I finally got around to firing it up. Check this out, it's quiet, very quiet. I'm only spinning the 120mm fan at 7 volts so the "whooshing" is barely audible. This is a great setup, I highly recommend going this route if your case can handle it. :)

LT-73
06-02-02, 06:55 PM
WoW goob ! Way kool ! I took that idea of yours about the car door molding. i got me a new case from a friend with no fans and no exhaust port . I added a 92mm blowhole and added a 80mm to the bottom front, I cut thru the metal and cut to the plastic face panel as well. Hole in the plastic was really crude even afer i did the job with a jigsaw. Sanded and added that molding and a grill. Damm thing looks great ! I had to bend the front grill a bit to get the angel right, the front panel has an outward warp to it. Wish i knew how to post pics so i can show ya.
Thanx again for that neat idea ! :D

_____________________________________
The Thunder Continues..................
No Limit Folding

Immortal
06-02-02, 10:09 PM
nice top fan... very nice work..

Ken
06-02-02, 11:06 PM
Nice work GooBee!
We should change your title to the "Blow Hole Man"! :D

Definitely professional looking work!

goobee
06-02-02, 11:07 PM
Great to hear LT-73, your first cut is always the hardest, you'll be volunteering to do some now. :D

Thanks Immortal, Ken

goobee
06-02-02, 11:11 PM
Originally posted by Ken
We should change your title to the "Blow Hole Man"! :D

Hmm, I think I'll pass. Might gives some negative impressions to some. :p

LT-73
06-02-02, 11:53 PM
Originally posted by goobee
Great to hear LT-73, your first cut is always the hardest, you'll be volunteering to do some now. :D

Thanks Immortal, Ken


hmmmmm, i dunno yet, i'll need some more practice, can i use your cases? plz ? :rotfl: :rotfl: :rotfl: ;) j/k

_______________________________
The Thunder Continues........................
No Limit Folding

LT-73
06-03-02, 01:30 AM
Originally posted by Ken
Nice work GooBee!
We should change your title to the "Blow Hole Man"! :D

Definitely professional looking work!


The "Blowhole man "? hmmmm kinda sounds kinky ! :rotfl: J/k ;)

________________________________
The Thunder Continues...........
No Limit Folding