PDA

View Full Version : What do you think of my case project?



tHE_0ne
04-25-02, 07:33 PM
simple, but good since I have no room for a intake fan (lots of stuff in the way and case has no holes)

and i know i do suck at Paint

Ken
04-26-02, 12:10 AM
Can you put an intake in the case floor?

Brent
04-26-02, 12:23 AM
what about on the side panel?

AoDLiQuiD-M3tH
04-26-02, 03:40 PM
LOL thats why he has the tubing to bring the air down unless im mistaken .......:D

tHE_0ne
04-27-02, 01:12 AM
my exhast fan is small

and i cant make a intake fan in the front

Ken
04-27-02, 02:06 AM
Originally posted by tHE_0ne
my exhast fan is small

and i cant make a intake fan in the front

Could you put one in the floor? Then you would reverse the top fan to blow out. This should give you a very good air exchange...
Just an idea... :)

RoundEye
04-27-02, 12:50 PM
Can you post a real pic of the case, or give us a link to who makes the case?

DiskDoc
04-27-02, 01:31 PM
Originally posted by exit1mile
I would try then turning the fans around and make the top 120mm an exhaust and the back fan an intake.


that wouldn't work out too well because the back of the comp is always hot. PSU blows out hot air from the back and if a fan was to intake air from the back, it wouldn't be any cooler than the one that'd intake from the top. infact, the one that intakes from the top would be cooler :D

here's an idea. have a rubber tube intake cool air from an open AC vent in your room.. that'd suck in cooler air.. lolz!! I'm j/k but not a bad idea what u think? lol

tHE_0ne
04-27-02, 06:22 PM
here's an idea. have a rubber tube intake cool air from an open AC vent in your room.. that'd suck in cooler air.. lolz!! I'm j/k but not a bad idea what u think? lol

Ghetto Mod :D, than somehow the heat gets turned on and your cpu frys

https://www.ibuypower.com/IMAGES/pc-25-1.jpg

this is thr only pics i found of my case, once i get my friends camera ill take some pictures.

LT-73
04-29-02, 12:18 PM
How about a drive bay cooler? or right below the plexi on the right bottom corner. You might have to get a mid size fan with at least 60cfm or better or like ken sugessted put one on the floor maybe a 120m and have the top as an exhaust.
What the heck go for all three ! you'll definately get some serious airflow that way !
:D

YARDofSTUF
04-29-02, 04:07 PM
i'd give it a 2 out of 10


top blow hole should be pulling hot air out, heat rises its a given, u draw air from the grund

YARDofSTUF
04-29-02, 04:15 PM
oh ur case is a Raidmax A228

tHE_0ne
04-30-02, 04:53 PM
what about a single intake from the side (by the pci slot)

I could make a hole in the window and add a fan