PDA

View Full Version : case design



CiscoKid
01-17-02, 08:15 PM
starting to get a seriouse design for my case...I wanted to have an integrated water cooling system, but can't find any good kits. does anyone have a tuturial site or online store where I can find something good?

YARDofSTUF
01-17-02, 08:21 PM
http://www.coolerguys.com/cpucool/koolance.shtml


http://www.coolcasemods.com/products.php?id=34

CiscoKid
01-17-02, 08:40 PM
Building the case using Lexan, figured it was time to dig out my dads old tools from when he worked in sign shops...still has a good selection of the adhesives he used that are still good. Air tight, pessure sealed :D

I wanted to make sure it was as cool as possible so that any internal heat doesn't warp the case or damage it in anyway.

cy
01-17-02, 09:09 PM
Originally posted by YARDofSTUF
http://www.coolerguys.com/cpucool/koolance.shtml


dang! a sick case..... :D

Grimson
01-17-02, 09:40 PM
Brent posted this awhile back, it may help.

http://bit-tech.net/article/53/

m4a2t0t
01-18-02, 01:56 AM
http://www.overclockers.com

look at the watercooling,left side on bottom

look at http://www.dangerden.com/mall/kits.asp

CiscoKid
01-18-02, 02:19 AM
Thanks for the sites. I checked out Overclockers yesterday, but guess I missed it

CiscoKid
01-22-02, 12:38 AM
Would making a clear case for my PSU be difficult? Like taking the PSU for this unit and removing the metal casing on it in place of the clear Lexan?

Vesuvius
01-22-02, 05:45 AM
That may warp, the PSU does get pretty warm dosn't it?